PVB 60 Varnish Transparent Insulation 50ml
  • PVB 60 Varnish Transparent Insulation 50ml
  • PVB 60 Varnish Transparent Insulation 50ml

PVB 60 Varnish Transparent Insulation 50ml

Q0033

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features:
A protective film, transparent.
Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.
Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.
PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.
-Temperature of application: -40°C + 60°C.
-Operating temperature: -50°C + 150°C.

Termopasty
5901764327844
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

PVB Varnish 60 Transparent Insulation 50ml description


Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage.

PVB Varnish 60 Transparent Insulation 50ml features:


A protective film, transparent.
Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.
Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.
PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.
-Temperature of application: -40°C + 60°C.
-Operating temperature: -50°C + 150°C.
-Points: 380°C.
-Capacity: 50ml
-High quality - manufactured in EU

Data sheet

Tipo
Barniz
Forma
Liquido
Volumen [ml]
50

Customers who bought this product also bought

Liquid Flux Alcohol Base TK83 100ml

Liquid Flux Alcohol Base TK83 100ml 
Flux liquid alcohol based for electronic welding. Type of flux: rosin
No Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC.

Q0017

Price €5.79

Kontakt PCB PLUS Spray 400ml

The PCB PLUS cleaner is designed for printed circuit boards.
Dissolves waste flux, including resin.
The liquid does not attack the substrate or the structural components of the printed circuit boards.
The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.
PCB Plus Cleanser Spray 400ml features:
- Form: spray
- Capacity: 400ml
Application:
- The product does not leave deposits
- It evaporates very fast
- Eliminates waste after welding
- Perfect in any electronic service
- The product does not react with most plastics used in electronics

Q0071

Price €9.95

10x Male-Male Cables 20cm Jumpers Dupont 2,54

10x Male-Male Cables 20cm Jumpers Dupont 2,54 features:
-Length: 20cm
-Quantity: 10 cables
-Connectors have male header contacts at either end
-Compatible with female connectors 2,54mm
-High quality and good working conditions
-Easy to install and use

K0007

Price €1.69

Adapter 2.5mm female power jack with PCB

The 2.5mm female jack connector is a connector to provide power to computers, LED TVs, routers, etc ...
This 2.5mm female jack connector adapter soldered on a PCB board, is ideal for use in our projects.
It has connection points where we can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
Adapter 2.5mm female power jack with PCB features:
- Connector type: 2.5mm female jack ,
- Color: black,
- Nominal voltage: 12v DC,
- Maximum current: 0.5A DC,
- Insulation resistance: ‰ ¥ 100MΩ,
- Operating temperature: -25ºC to + 85ºC,
- Number of output pins: 3
- Pitch between output pins: 2.54mm.

M0194

Price €0.89

Two-component silicone encapsulating compound 011

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 011 features:
- Mixing ratio: 100: 8,
- Density: 0.97g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.

Q0082

Price €11.39

Passive Buzzer 5V

The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. Passive Buzzer 5V features:

- Input voltage: 3V to 12V
- Diameter: 12mm
- Height: 7.5mm
- Pin spacing: 6.5mm
- Impedance: 16 Ohm
- Working frequency: 2 to 5 KHz
- Quantity: 1 unit

M0196

Price €0.45
€3.15

2,60 tax excl.

Tax included
Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €3.15

Order until 4pm we will send today
30 days return