Grease TF silicone + PTFE 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Last items in stock Price €3.39
15x Electrolytic Capacitor 1uF 50V 105º C PIC for Arduino 15x Electrolytic Capacitor 1uF 50V 105º C PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 1uF-Maximum tension: 50V-Maximum temperature: 105º C-Dimensions: 5x11mm-Quantity: 15 units Code D0036 Backorder Price €0.09
SOP8 to DIP8 Converter 150mil Connector SOP8 to DIP8 Converter 150mil Connector features: - SOIC universal, converter SOP8 to DIP 8 adapter 150mil IC- High quality and durable- Easy to use- Suitable for all Series-11, ALL-100GANG, LT-48 series, SuperPRO series, top series, etc.- Compatible with support chips: 24CXX, 93CXX and all SOP8 narrow chips- Compatible with the programmers (SOP8 step 1.27) and all the SOP8 chips- Size: 2x1.8x1.7 cm / 0.79x0.71x0.67 " Code Z0001 Available Price €1.95
HC-SR501 Motion Detector Module Passive Infrared PIR Sensor Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º. An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone. Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features: - Infrared sensor with control circuit - Adjustable sensitivity and time - Operating voltage: 4.5V- 20V - Consumption in Idle state: Code S0003 Available Price €1.79
Buzzer 5V Active Buzzer 4 to 7V DC Buzzer alarm to convert electrical to acoustic signals in robotics devices and Arduino projects. Buzzer 5V Active Buzzer 4 to 7V DC features: - Input voltage: 4V to 7V - Diameter: 12mm - Height: 9.5mm - Spacing Pins: 7.6mm - Maximum Current: Code M0007 Available Price €0.45
L293D Motor Drive Shield Expansion Board It allows controlling many different types of engines: - Up to 4 bidirectional current motors- Up to 2 stepper motors (unipolar or bipolar) In addition it is provided with two connectors for servos. L293D Motor Drive Shield Expansion Board features: - Minimum operating voltage: 4.5 V- Maximum operating voltage: 36 V- Maximum current: ± 1.2 A (650mA)- Logic voltage: 5V- Controller L293D- Measures: 70x55x20 mm L293D controller consists of 4 H bridges with 650 mA current with thermal protection.Pull-down resistors keep the motors off during startup. Code R0001 Available Price €2.95
L7812 Voltage Regulator 12V 1.5A TO-220 7812 for Arduino L7812CV L7812CV Voltage Regulator 12V 1.5A TO-220 7812 Arduino L7812CV features:-Type Output: Fixed-Voltage Output: 12V-Manufacturer: ST Microelectronics-Output current: 1.5A-Max input voltage: 35V-Input input min.: 5V-Operational temperature: 0ºC to + 125ºC-Encapsulated: TO-220-Polarity: Positive Code T0004 Available Price €0.26
Aluminum Desoldering Pump Tin Antistatic Suction Desoldering iron for the removal of excess tin. You can quickly and effectively remove solder from a plate or circuit.Replaceable antistatic nozzle.Manufactured in Aluminum.Aluminum Desoldering Pump Tin Antistatic Suction features:- Length: 190mm- Desoldering pump- High suction power- Replaceable long-life silicone tip- Light weight- Easy use with one hand, light and resistant- Vacuum Solder Aluminum Desoldering Pump Solder Remover Pump Tool- A good quality product for fast and efficient removal of excess solder, ideal for PCB repair- High-capacity spring-loaded plunger quickly eliminates welding in one action. The Pumping tool easily- Disassemble for a quick clean Code H0001 Available Price €2.95
Water-Based Cleaner PCB 1L Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 ✗ Out-of-Stock Price €5.90
Electrical Contacts Cleaner Spray Kontakt S 60ml A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - Made in EU- No to the most usual materials of electrical systems Code Q0019 ✗ Out-of-Stock Price €2.49
Electrical Contacts Cleaner Spray + Brush Kontakt S 400ml A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - manufactured in EU Code Q0028 Available Price €6.99
Ultrasonic Cleaning Liquid Termosonik 1 litre Ultrasonic Cleaning Liquid 1 litre features: Suitable for use in ultrasonic baths, this cleaner completely removes all traces of contamination including light oils, silicones, etc. Code Q0055 ✗ Out-of-Stock Price €14.95
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Last items in stock Price €12.95
Compressed Gas 300ml Spray Cleaner Compressed Air 300ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0026 Available Price €3.95
Blue cleaning sponge for soldering iron tip with pre-cut circle at the center Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip with pre-cut circle at the center features: - Circle diameter 17mm precut to the center of the sponge,- Size: 55x55mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0151 Available Price €0.80
Microfiber Cleaning Cloth Microfiber Cleaning Cloth features: - Microfiber cleaning cloth is perfect for cleaning laptops, screens, keyboards, computer casings, printers, copying machines, scaners, phones, telefaxing machines as well as other such devices. Cleans firmly without leaving stains and smudges Code Q0067 Last items in stock Price €2.79
Label Killer Spray 300ml Self-adhesive label remover - removes labels form all kinds of packaging. Caution: the preparation may imperceptibly dissolve a colorful print under the removed label as well as dissolve some plastics - caution recommended! Code Q0057 ✗ Out-of-Stock Price €4.95
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €9.95
Flux BORAX 500g Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides. Code Q0066 ✗ Out-of-Stock Price €3.95
Spray Contact Cleaner Kontakt S 300ml Spray Contact Cleaner 300ml features:A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections- Has cleaning properties- Used in audio technologies- Protection against moisture and corrosion- Prevents stray current Code Q0023 Available Price €4.79
Cleaning liquid for white boards 250ml Liquid for cleaning LED boards.The fluid quickly and effectively cleans even the most persistent dirt on the surface of the boards.Eliminates traces of marker, scratches and discoloration resulting from long term use of the board. Cleaning liquid for LED boards 250ml features: - Manufacturer: AG Chemia, Content: - A 250ml aerosol. Code Q0100 Last items in stock Price €4.79
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €9.95
Microfiber Cleaning Cloth Microfiber Cleaning Cloth features: - Microfiber cleaning cloth is perfect for cleaning laptops, screens, keyboards, computer casings, printers, copying machines, scaners, phones, telefaxing machines as well as other such devices. Cleans firmly without leaving stains and smudges Code Q0067 Last items in stock Price €2.79
Grease Dry TF Spray 100ml Anti-Adhesive No-Fat Dry Spray Based on PTFE 100ml. Dry, no-fat, anti-adhesive agent based on pure PTFE Code Q0068 Available Price €3.79
Compressed gas 600ml Spray Cleaner Compressed gas 600ml Spray Cleaner features: - Cleaning computers, keyboards, electronics, printers- All types of office material- Made in the EU - HIGH QUALITY- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices Code Q0101 Available Price €6.59
Kontakt PCB PLUS spray 100ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 100ml features:- Shape: Spray- Capacity: 100mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0072 Last items in stock Price €3.95
Blue cleaning sponge for soldering iron tip with pre-cut circle at the center Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip with pre-cut circle at the center features: - Circle diameter 17mm precut to the center of the sponge,- Size: 55x55mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0151 Available Price €0.80
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Last items in stock Price €12.95