Anti-Adhesive No-Fat Dry Spray Based on PTFE 400ml

Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features:
- The thermal conductivity of ~ 3.1 W/mK
- Not suitable for aluminum radiators
- No driver
- 1,5ml content

Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C.
- Flux paste based on activity rosin medium.
- Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints .
Operating temperature up to 350 C.

Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:
- Flux liquid alcohol based for electronic welding.
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- 100ml capacity
- Content of solid bodies0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

Microfiber Cleaning Cloth features:
- Microfiber cleaning cloth is perfect for cleaning laptops, screens, keyboards, computer casings, printers, copying machines, scaners, phones, telefaxing machines as well as other such devices. Cleans firmly without leaving stains and smudges

Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.
A special brush facilitates the application of the paste.
Diamond powder content: 10%
AG Extreme thermal grease 4g flask features:
- Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,
- Thermal impedance: <0.065 ° C in2 / W
- Specific gravity:> 2.4g / cm3,
- Evaporation: <0.001%,
- Fluency: <0.001%,
- Electrical conductivity: insulation,
- Viscosity: 1000 cP,
- Working temperature from -40ºC to + 300ºC,
- Supported temperatures: -40ºC to + 350ºC,
- Gray.
Mode of use:
- Store in a well ventilated, cool and dry place.

Flux gel syringe 1.4cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases).

Vaseline Technical Grease 20g features:
- Lubricates moving surfaces, bearings,
- Protects metal parts against corrosion and electrical contacts
- Protects and preserves rubber and plastic
- It can be used as mounting grease
- Eliminates squeaks
- Reduces and decreases friction

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 019 features:
- Manufacturer: TermoPasty,
- Mixing ratio: 100:6,
- Density: 1.2g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 45000 cP,

A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - Made in EU
- No to the most usual materials of electrical systems