Insulating Varnish Spray 400ml
  • Insulating Varnish Spray 400ml

Insulating Varnish Spray 400ml

Q0014

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:
-A protective film, transparent.
-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination
-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the
protective film
-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to be
soldier, such as welding terminals or conductors.
-Temperature of application: od -40 ° C + 60 ° C.

Termopasty
Add to wish list

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage.

Insulating Varnish Spray 400ml features:


-A protective film, transparent.
-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination
-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the
protective film
-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to be
soldier, such as welding terminals or conductors.
-Temperature of application: od -40 ° C + 60 ° C.
-Operating temperature: od -50 ° C + 150 ° C.
-Points: 380 ° C.
-Capacity: 400ml

Data sheet

Tipo
Barniz
Forma
Spray
Volumen [ml]
400

Customers who bought this product also bought

Label Killer Spray 300ml

Self-adhesive label remover - removes labels form all kinds of packaging. Caution: the preparation may imperceptibly dissolve a colorful print under the removed label as well as dissolve some plastics - caution recommended!

Q0057

Price €4.95

LED Display 4-Digit 7-Segment Red Common Cathode

LED Display 4-Digit 7-Segment Red Common Cathode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 12
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 4
- Segment numbers by digit: 7
- Operating temperature: -25 ° C - + 85 ° C
- Storage temperature: -30 ° C - + 85 ° C
- Screen with common cathode connection
- Screen size: 50.3x19x8 mm
- This product is a 4-digit screen composed of 7 red LED segments with excellent brightness and features:.

P0124

Price €2.49

2x MOC3020 Optocoupler 400V

2x MOC3020 Optocoupler 400V features:
-Triac Driver Output Optoisolator
-Pack: DIL 6
-Electronic voltage forward: 1.15V
-Trigger LED current: 30mA
-Voltage isolation: 5,300 VAC RMS
-Maximum blocking voltage: 400V
-Temperature of operation: -40°C a + 85°C

T0013

Price €0.79

Adhesive Thermal Paste Glue 10g CPU

Totally new and of high quality.
Dissipate the heat of the computer by refrigerating it effectively.
It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.
Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features:
  - Color white
- Surface drying time [25 ° C, min]: 2- 8
- Hardness: 45 -75
- Tensile strenght (Mpa): 2.0
- Elongation (%): 100
- Thermal Conductivity W / mk:> 1,0
- Volume Resistance (c-in / W): <2.0 x 10 * 15
- Dielectric strength (KV / mm): 20
- Dielectric Constant: 3.0
- Dielectric loss factor (60Hz): 0.003
- Operating temperature (max): 200 ° C

Q0006

Price €3.95

UNO WIFI Board CH340 compatible Arduino, NodeMCU, WeMos ESP8266

  - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields   Characteristic:   - ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: micro USB female 

B0070

Price €11.99

MAX9812L Amplified Microphone for Measuring Sound

The MAX9812 is a sound amplifier specially designed to treat the signal coming from microphones.
We can use it together with Arduino to measure sound from a processor like Arduino.
When we saw the modules with microphone we commented that, in general, the signal generated is too low to be registered correctly.
If we want to be able to measure sounds, we will have to amplify the signal. The MAX9812L has single / dual inputs, fixed gain of 20dB, bandwidth of 400 kHz, low noise and low signal distortion 0.015% THD.
There are two models, its supply voltage is 2.7V to 3.6V.
We can use the sensors with MAX9812 for applications that require measuring the intensity or frequency of the sound.

M0151

Price €6.90
€11.29
Save €1.30 €9.99

8,26 tax excl.

Tax included 1
Last item
Regular price €11.29 Price €9.99

Order until 4pm we will send today
30 days return