MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3
  • MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3
  • MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3
  • MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3
  • MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3

MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3

The integrated mainboard driver MKS-GEN L V1.0 for 3D printer has been developed by Makerbase to optimize existing problems on the open source controller board such as Ramps 1.4.
This product offers more flexible options for users.
MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3 features:
- Mega2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.
- Supports a variety of step-by-step drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change stepper motors and motors that users like.
- Reserve the signal from the external controller, available to connect an external high current driver to drive stepper motors 57 and 86.
se high quality MOSFET, better cooling and more stable.

Read more...
I0143
Makerbase
Quantity

Price €19.90

16,45 tax excl.

Tax included
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3 description


The integrated mainboard driver MKS-GEN L V1.0 for 3D printer has been developed by Makerbase to optimize existing problems on the open source controller board such as Ramps 1.4.
This product offers more flexible options for users.

MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3 features:


- Mega2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.
- Supports a variety of step-by-step drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change stepper motors and motors that users like.
- Reserve the signal from the external controller, available to connect an external high current driver to drive stepper motors 57 and 86.
- Use high quality MOSFET, better cooling and more stable.
- Use a specific power chip, support 12V-24V power input and solve the problems of chip heating and lack of power.
- The stable and reliable filter circuit greatly reduces the interference and avoids blockages as possible in the printing process.
- Use the CH340 serial port chip, install the unit more easily than 16U2.
- Run the Marlin firmware, the configuration is completely identical to that of Ramps 1.4, and is available to directly replace the Ramps 1.4.
- Support Ramps 1.4, 2004LCD, 12864LCD, TFT28 and TFT32.
- Available for the 24V input, the hot bed current can be reduced to 1/4 with the same power of the system, which effectively solves the problem that the MOSFET of the heated bed is heated.
- The X axis, Y axis and Z axis with different color terminal control stepper motors and limit switches, which is convenient for wiring.
- Connect the step-by-step controllers according to the different color terminals, which decreases the probability of recoil and avoids the damage of the controller board.

Customers who bought this product also bought:

Hotend J Head Metal...

Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D

Price €8.25
XL4015 DC Voltage Converter...

XL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596

Price €3.94
120x Female-Male Cables...

120x Female-Male Cables Female-Female Male-Male Dupont Jumpers 2.54...

Price €0.04
2x IDC 10 female connector...

2x IDC 10 female connector for flat cable AWG 1.27

Price €0.54
NTC thermistor 100K 3950 1m...

NTC thermistor 100K 3950 1m RepRap cable

Price €1.19
Motor Nema 23 12.8kg...

Motor Nema 23 12.8kg 57HS562804

Price €21.90
Fan 12V 2x Cable 50x50x15...

Fan 12V 2x Cable 50x50x15 3D Printer Reprap

Price €2.09
Flat Cable 1m AWG28 1.27 10...

Flat Cable 1m AWG28 1.27 10 Pins Colors

Price €1.95

4 other products in the same category:

12864 LCD Display Full...

12864 LCD Display Full Graphic Intelligent Controller

Price €12.25
Shield Ramps 1.4 Reprap...

Shield Ramps 1.4 Reprap Mendel 3D Printer

Price €5.10
LCD 2004 Intelligent Reprap...

LCD 2004 Intelligent Reprap Controller 3D Printer

Price €8.91
Makerbase MKS TFT35 V1.0...

Makerbase MKS TFT35 V1.0 touch screen smart display controller 3d...

Price €37.59
chat Comments (0)
No customer reviews for the moment.