Female to Female Cable 3 Pins 3 Colors
  • Female to Female Cable 3 Pins 3 Colors

Female to Female Cable 3 Pins 3 Colors

K0091

Ideal for your electronic projects, Arduino, but can also be used with other microcontrollers.

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Female to Female Cable 3 Pins 3 Colors description

  • - For connecting Arduino modules or boards
  • - Ideal for your electronic projects, arduino, but can also be used with other microcontrollers.

Female to Female Cable 3 Pins 3 Colors features:

  • - No soldering required
  • - Circuits can be easily modified or revised
  • - Quantity: 2 cables 3-pin, female-female connector
  • - Colors: red, black, green
  • - Pin pitch: 2.54mm
  • - Cable lengths: 70cm
  • - For fast construction of a prototype of an electronic circuit

Data sheet

Longitud de cable
70cm
Conector
3 pines hembra-hembra

Customers who bought this product also bought

Analogical Acoustic Sensor 4-Pin Microphone Sound Detector Module

Sound detection module for Arduino projects, smart cars. Analogical Acoustic Sensor 4-Pin Microphone Sound Detector Module features:
- Adjustable High Sensitivity Acoustic Sensor
- LM393 comparator chip
- Integrated indicator LED
- AO analog output, output voltage signal in time real microphone
- DO digital output, sensitivity adjustable through potentiometer
- Frequency Range between 30 and 15000 Hz
- Power 4 ~ 6V
- Measurements 36x16x15mm

S0017

Price €1.79

Printed Circuit Board Terminal 3 poles 5.08mm pitch

Blue 2 pole PCB mount screw terminal 5.08mm pitch Printed Circuit Board Terminal 3 poles 5.08mm pitch features:
Number of Contacts: 3
Pitch: 5.08mm
Number of Rows: 1
Mounting Type: PCB
Gender: Male
Allowable Section: 1.5mm2 (22- 14 AWG)
Termination method: screw
Type: screw terminal block
Nominal current: 16A
Nominal voltage: 250V
Color: blue
Material: Nylon 66
Depth: 10mm
Width: 7.5mm
Length: 10mm

K0218

Price €0.34

Adjustable DC Module LM2596 1,25-32V 3A Step Down

3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features:

- Based on the LM2596S-ADJ regulator
- Rectification: Asynchronous
- Output Voltage: 1.25v - 32v DC (adjustable)
- Voltage of Input: 3.2v - 35v DC
- Max Output Current: 3A (with heat sink)
- Ripple at output voltage: 30mV
- Frequency: 150KHz
- Max Conversion Efficiency: 92%
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 2.5%
- Operating Temperature: -40ºC to + 85ºC
- Measurements 43x 21x 14 mm

A0004

Price €1.99

Cable 1x0.35 Flexible single-pole 0.35mm red 3m

Characteristic:
-Low-voltage electric cables
-Standard: EN 50525-2-31
-Number of conductors: 1x0.35mm2
-Service voltage: 300 / 500V
-Service temperature: at 70ºC
-Resistance at 20ºC: 55.0 Ohm / Km
-Weight (Kg / Km): 7
-Outer diameter: 2.4mm

K0033

Price €0.45

Power Supply 12V 30A 360W

Characteristic: - Supply voltage: 110 / 230V AC
- Output voltage: 12V DC
- Output amperage: 30A - Power at 12V: 360W
- Dimensions: 215mm x 115mm x 50mm

A0129

Regular price €28.95 -€4.00 Price €24.95

Mosfet 24V 5A IRF520 PWM controller

Mosfet 24V 5A IRF520 PWM controller features:
- The IRF520 controller module can control the PWM signal from the Arduino module and adjust the DC voltage of So that we can control the speed of the DC motor, the brightness of the bulb, the LEDs, the heater.
- The built-in IRF520 N-MOSFET transistor
- Operating voltage: 3.3V -5V ( compatible with ARDUINO Raspberry PI)
- Charging voltage: 0-24V
- Charging current: up to 5A (more than 1A, the system must be equipped with a heat sink point)
- 60W max power (more than 10W must be equipped with a heat sink)
- Terminalblock connectors
- LED indicating the presence of power
- Dimensions: 33x24mm

A0022

Regular price €2.49 -€0.50 Price €1.99
€0.95

0,79 tax excl.

Tax included 1
30+ items
Price €0.95

The minimum purchase order quantity for the product is 2.

Order until 4pm we will send today
30 days return