45cm Crocodile to USB Male Test Cable
  • 45cm Crocodile to USB Male Test Cable
  • 45cm Crocodile to USB Male Test Cable

45cm Crocodile to USB Male Test Cable

K0317

45-centimetre crocodile cables to USB.  They come in a pair of two cables, one red and the other black, connected to a male USB connector.

OEM
5905323230088
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

45-centimetre crocodile cables to USB.  They come in a pair of two cables, one red and the other black, connected to a male USB connector.

Characteristics:

  • Length: 45 cm cable + clamps + USB connector
  • Colours: red and black
  • Quantity: 1
  • Anti-torsion reinforced USB connector

Customers who bought this product also bought

LED Display Screen Board Matrix 8x8 Common Anode/ Common Cathode Columns Red Dots

LED Display Screen Board Matrix 8x8 Common Anode/ Common Cathode Columns Red Dots features:
- Supply voltage of the LED points: 1.8-2.4 VDC
- LED color of the dots: red
- Pin numbers: 16
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 120mA
- Power consumed per segment: 80mW
- Segment numbers (points): 64
- Diameter of a point: 3mm
- Operating temperature: -35°C - + 85°C
- Storage temperature: -35°C - + 85°C
- Screen with common anode connection for the rows and common cathode for the columns
- Screen size: 32x32x8 mm

P0126

Regular price €2.89 -€1.00 Price €1.89

CP2102 USB 2.0 A RS232 Converter UART TTL Serial

Ideal for connecting TTL RS232 devices to your PC through the USB port. CP2102 USB 2.0 A RS232 Converter UART TTL Serial features:
- Controller CP2102
- 5 pins: 3.3v, 5.0v, TxR, RxD, GND
- Standard USB type to male and 5 pin TTL connector
- 3 Status LEDs: Power, RX and TX
- USB 2.0 specification with 12Mbps maximum speed

C0001

Price €3.70

5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat

The 28BYJ-48 has everything you need to start using stepper motors in your project
A stepper motor converts digital impulses into small steps of movement in one direction The engine also comes with a ULN2003 engine controller card
Can control two DC motors or a bipolar stepper motor with a maximum amperage of up to 500 mA
Equipped with state indicator LEDs A, B, C, D 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat features:
- Engine model: 28BYJ-48
- Phases engine: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per round: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm

R0038

Price €2.95

NE555P DIP8 Precision Timer Integrated Circuit

NE555P DIP8 Precision Timer Integrated Circuit features:
- Blister: DIP8
- Number of pins: 8
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Input voltage VCC: 4.5 - 16 VDC
- THRES voltage level: 2.4 - 11.2 VDC
- TRIG voltage level: 1.1 - 5.6 VDC
- RESET voltage level: 0.3 - 1 VDC
- DISCH voltage level change out of state: 0.15 - 0.4 nA
- CONT voltage (open circuit): 2.6 - 11 VDC
- Low level output voltage: 0.1 - 0.4 V
- High level output voltage: 2.75 - 13.3 V - Output current I (O): ± 200 mA
- THRES current: 30 - 250 nA
- TRIG current: 0.5 - 2 μA
- RESET current: -0.4 - 0.4 μA
- Current change DISCH out of state: 20 - 100 nA

T0061

Price €0.79

Passive Buzzer 5V

The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. 2x Passive Buzzer 5V features:

- Input voltage: 3V to 12V
- Diameter: 12mm
- Height: 7.5mm
- Pin spacing: 6.5mm
- Impedance: 16 Ohm
- Working frequency: 2 to 5 KHz
- Quantity: 1 unit

M0011

Price €0.39

40x Female Male 10cm

40x Female Male 10cm features:
- Length: 10cm
- Quantity: 40 cables
- Compatible with 2.54mm male connectors
- High quality and good working conditions
- Easy to install and use

K0106

Price €1.99

Desoldering Wire 1mm 1.0

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1mm 1.0 features:
- Material: Copper
- Length: 1.5m
- Width: 1.0mm
- Desoldering Braid Solder Remover Wick 1mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

H0003

Price €1.79
€2.79

2,31 tax excl.

Tax included 1
14 items
Price €2.79

Order until 4pm we will send today
30 days return