Computer power cable PC C14 black 1.8m

2x Insulation Tapes PVC Blue 10m x 15mm x 0.13mm features:
- PVC insulating tape with adhesive
- Thickness of 0.13 mm
- Measures 10m x 15mm
- Quantity: 2 units
- Heat resistance: 80°C

Characteristic: - Supply voltage: 110 / 230V AC
- Output voltage: 12V DC
- Output amperage: 30A - Power at 12V: 360W
- Dimensions: 215mm x 115mm x 50mm

Clamp Nylon White Plastic flange, 100x2.5mm.

Insulation Tapes PVC Red 20m x 19mm x 0.13mm features:
- PVC insulating tape with adhesive
- Thickness of 0.13 mm
- Measures 20m x 19mm
- Heat resistance: 80°C

Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog

Ideal to control the speed of DC motors.
Characteristic:
- Input voltage: 12-40VDC,
- Max continuous output current: 8A (peak current 10A),
- Control power: 0.01- 400W,
- Dimensions: 60x75x28mm,
- PWM frequency: 13kHz,
- Static current: 0.02 A (Standby),
- Adjustable duty cycle: 10% -100% ,
- It integrates a L7812CV TO-220 regulator,
- It incorporates a 10A fuse to protect the power circuit.
Note that the voltage applied to the motor will be the supply voltage applied to the circuit.

IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface features:
- Based on the PCF8574A chip
- Power: 5V
- Supports I2C Protocol
- A potentiometer for regulate contrast
- Dimensions: 19x42mm PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F - You can change anyone between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 - With this module the communication between the Arduino and the LCD It is only made through two outputs, SDA and SCL
- Up to 8 LCD screens can be connected to the same I2C bus choosing a different address - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32

LED Power Supply Transformer DC 12V 5A 60W features:
- Supply voltage: 110/230V AC
- Output voltage: 12V DC
- Output amperage: 5A
- Power at 12V: 60W
- Dimensions: 110mm x 78mm x 36mm