Tower Pro Micro Servo 9g SG90 360 degree Tower Pro Micro Servo 9g SG90 360 degree features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0075 Available Price €2.95
IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface features: - Based on the PCF8574A chip - Power: 5V - Supports I2C Protocol - A potentiometer for regulate contrast - Dimensions: 19x42mm PCF8574 - & gt; the default address 0x20 PCF8574A - & gt; the default address 0x3F - You can change anyone between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 - With this module the communication between the Arduino and the LCD It is only made through two outputs, SDA and SCL - Up to 8 LCD screens can be connected to the same I2C bus choosing a different address - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32 Code P0008 Available Price €1.39
Module TCRT5000 Infrared Sensor IR Tracker Line Obstacle The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision. The ideal obstacle detection detector for the installation of smart robots. TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object. The working wavelength is 950nm. The transmitter is infrared LED and the phototransistor receiver. By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected). The sensor allows the detection of an object at a distance of up to 12 mm. Code S0025 Available Price €1.85
1x Female-Male Cables 20cm Jumper Dupont 1x Female-Male Cables 20cm Jumper Dupont features: -Length: 20cm-Quantity: 1 cable, 1pin-Connectors have male and female header contacts at either end-Compatible with male and female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0202 Available Price €0.19
Anet A8 DIY KIT 3D Printer Ideal to stimulate users' creativity and inspiration and the realization of their ideal. Widely applied to many fields, 3D toy printing, teaching equipment and other technological devices. Anet A8 DIY KIT 3D Printer features: - Screen: LCD2004 - Frame material: Acrylic - Hotbed Material: Aluminum alloy - Printable material: ABS / PLA / HIP / PRTG / TPU / wood / Nylon / PP etc - Filament diameter: 1.75mm - Plug: UE - Voltage: 110-220V - Current: 20A - Power: 240W - Item size (mounted): 50 * 45 * 40cm / 19.7 * 17.7 * 15.7in - Item Weight: 8kg / 17.6Lbs - Package Weight: 9.5Kg / 20.9Lbs Technological Parameter: - Max. Printer size: 220 * 220 * 240mm - Printer speed: 10-120mm / s Code I0017 ✗ Out-of-Stock Price €195.00
W5100 Mini Network Module Ethernet Shield Arduino compatible W5100 Mini Network Module Ethernet Shield Arduino features: - Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip - Provides a simple mode to connect your module to the local network and the internet - Compatible with the official Arduino Ethernet library - With this shield you can build a web server - It can be used as a server or as a client - Controller: Wiznet W5100 - Supports TCP and UDP protocols - Supports up to 4 simultaneous connections - Compatible with all versions of Arduino: UNO, mega 1280/2560 - Dimensions: 50 x 25x 25mm Code W0074 Available Price €10.90
Rechargeable Battery Samsung INR18650 2500mAh Li-ion Rechargeable Battery Samsung INR18650 2500mAh Li-ion 3.7V 20A unprotected features: IMPORTANT: This battery does not have a protection circuit. Use it at your own risk. Do not charge over 4.2V Do not discharge below 3V Do not change polarity Do not heat the battery, or expose it to high temperatures Do not wet or expose to environments of High humidity For long periods of storage it should be stored below 45 ° C After long periods of storage you will probably need to do some charging cycles to increase the capacity again. Quantity: 1 unit Nominal capacity: 2500mAh (0.2C, 2.75V discharge) Minimum capacity: 2450mAh (0.2C, 2.75V discharge) Charging voltage: 4.2 ± 0.05 V Code PP030 ✗ Out-of-Stock Price €6.59
40x Male to male cables 20cm Characteristic: -Length: 20cm -Quantity: 40 cables -Mono Dupont connectors on both ends -Compatible with 2.54mm female connectors -High quality and good working condition -Easy to install and use Code K0006 Available Price €2.49
Aluminum Robotic Arm with 6 DOF axes The 6 DOF - 6-axis black aluminium arm is widely used in the field of teaching, personal production and amateur education, it can be seen as a demonstration platform with multiple degrees of freedom, its power system consists of six servo motors. So the arm can move, sideways and sideways, up and down, left and right to grasp any object. It comes with 6 servos already in set. Code R0072 Last items in stock Regular price €86.74 -€4.52 Price €82.22
Aluminium Robot 6 DOF Arm without servo The 6 DOF black aluminum arm is widely used in the field of teaching, the personal production of IDY and the education of the fanatics, it can be seen as a demonstration platform of multiple degrees of freedom, and its energy system consists of six servomotors, Robot can be achieved before and after, Up and down, left and right to grasp the handling of the presentation. Aluminium Robot 6 DOF Arm without servo features: - Material: 2mm thick aluminum plate - Color: Black Code R0071 Last items in stock Price €49.00
Acrylic robot 4 DOF arm full educational Kit (arm, servo, board,etc) The complete 4 DOF robotic arm kit ideal for beginners and educational environments. The kit contains a small and simple 4-axis robot arm together with the components to start robotic projects. Includes arm, 4 servos, UNO board and joysticks for control. Perfect kit to learn and teach robotics in an easy way, as you can build it with the instructions in the description in less than an hour and ready to control the arm with a development board and simple program! Compatible with Arduino. Fully programmable. Code R0089 Last items in stock Regular price €52.77 -€1.35 Price €51.42
Sensor Shield V5 APC220 Arduino compatible Arduino Sensor Shield V5 APC220 features: Sensor Shield V5.0 allows: - Being punctured directly to an Arduino Uno, Mega, Leonardo plate- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more Code M0001 Available Price €2.89
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
Arduino compatible UNO R3 board - It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features: - Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal - Microprocessor: ATmega328 - Operating voltage: 5V - Input voltage (recommended): 7-12V - Input voltage (limits): 6-20V - Clock speed: 16 MHz - Digital I / O Pins: 14 - Analog input pins: 6 - DC current per I / O Pin: 40 mA - DC Current per Pin 3.3V: 50 mA - Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328 - SRAM 2 KB - Atmega328 Code B0009 Available Price €9.95
Double Joystick Module 2 Axis XY PS2 Ideal for your arduino projects, but can also be used with other microcontrollers. Double Joystick Module 2 Axis XY PS2 features: - Two axes (XY) - Return to the center - Central push button - Connections: + 5Vcc / GND / VRx / VRy / SW - Dimensions: 4 x 2.6 x 3.2cm Code M0010 Available Regular price €2.50 -€0.31 Price €2.19
Servo 9g SG92r 2.5kg 9g digital servo new version of SG90. POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque. It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features: Weight: 9g Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v) Gear type: POM with carbon fiber Operating speed: 0.1sec /60degree (4.8v) Temperature range: 0„ƒ_ 55„ƒ Dead band width:1us servo wire length: 25 cm Servo Plug: JR (Fits JR and Futaba) servo arms &screws included and fit with Futaba servo arm Code R0079 Available Price €4.30
Arduino Uno R3 Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog Code BAR66 Available Price €23.99
Aluminium Robot 6 DOF Arm without servo The 6 DOF black aluminum arm is widely used in the field of teaching, the personal production of IDY and the education of the fanatics, it can be seen as a demonstration platform of multiple degrees of freedom, and its energy system consists of six servomotors, Robot can be achieved before and after, Up and down, left and right to grasp the handling of the presentation. Aluminium Robot 6 DOF Arm without servo features: - Material: 2mm thick aluminum plate - Color: Black Code R0071 Last items in stock Price €49.00
Acrylic robot 4 DOF arm full educational Kit (arm, servo, board,etc) The complete 4 DOF robotic arm kit ideal for beginners and educational environments. The kit contains a small and simple 4-axis robot arm together with the components to start robotic projects. Includes arm, 4 servos, UNO board and joysticks for control. Perfect kit to learn and teach robotics in an easy way, as you can build it with the instructions in the description in less than an hour and ready to control the arm with a development board and simple program! Compatible with Arduino. Fully programmable. Code R0089 Last items in stock Regular price €52.77 -€1.35 Price €51.42
Aluminum Robotic Arm with 6 DOF axes The 6 DOF - 6-axis black aluminium arm is widely used in the field of teaching, personal production and amateur education, it can be seen as a demonstration platform with multiple degrees of freedom, its power system consists of six servo motors. So the arm can move, sideways and sideways, up and down, left and right to grasp any object. It comes with 6 servos already in set. Code R0072 Last items in stock Regular price €86.74 -€4.52 Price €82.22