List of products by brand Sparkfun

Showing 1-47 of 47 item(s)

Bus Pirate - v3.6a

This little board is great for any type of prototyping - enables troubleshooting and debugging of any board with voltage from 0 to 5.5V. The  board interprets the commands and sends them further via a proper protocol (ranging from UART through I2C up to HDD44780 LCD). The Pirate lets analyze as well the data sent back from the device to the computer terminal effectively allowing to decipher potential errors. The bootloader installed on the board enables the quick and easy update of firmware and changing the functionality of the board.

This board features PIC24FJ64 and FT232RL USB-to-serial chip enabling swift communication over the mini-B USB port. On the other end of the board 2x5 pin header is placed with detailed descriptions of each pin.

SP037

Price €39.99

Circuit Scribe Conductive Ink Pen

The Circuit Scribe conductive ink pen, with its simple design, is perfect for this, allowing you to draw circuits instead of soldering or connecting them to a test board.  

SP095

Regular price €9.50 -€1.00 Price €8.50

CO₂ Humidity and Temperature Sensor - SCD40 (Qwiic)

This SparkFun CO2, humidity and temperature sensor incorporates Sensirion's new generation of SCD40 photoacoustic CO2 sensors for highly accurate environmental readings. The sensor is capable of detecting concentrations from 0 to 40000 ppm with high precision above 400-2000 ppm ±(50 ppm+5%). The SCD40 has an integrated CMos® temperature and humidity sensor for greater precision.

SP097

Price €74.95

Load Cell Weight Sensor 50kg

Pressure sensor sometimes called strain gauge. Load cell for measuring weights up to 50kg. The transducer measures the strain of the metal structure and converts it into a few mV.

Sp096

Regular price €7.69 -€0.99 Price €6.70

MyoWare 2.0 Cable Shield

This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person.

SP045

Price €7.49

MyoWare Cable Shield

This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person.

SP072

Price €6.49

MyoWare Muscle Sensor Development Kit - OBSOLETE

This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together.

SP074

MyoWare Power Shield

MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V.

SP071

Price €6.49

Serial Enabled 16x2 LCD - White on Black 5V

It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328.

SP035

Regular price €36.99 -€10.00 Price €26.99

SparkFun 16x2 SerLCD - Black on RGB 3.3V

This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself.

We have the same screen with a reverse color version, i.e. RGB on black with a reference of SP028

SP028

Regular price €27.99 -€10.00 Price €17.99

SparkFun 16x2 SerLCD - RGB on Black 3.3V

This little PCB piece is a great independent display addition to any project. Why independent? Well, it features an ATmega328P AVR on its back, making it a pretty much an UNO with a screen rather than a screen itself.

We have the same screen with a reverse color version, i.e. black on RGB with a reference of SP028

SP027

Regular price €27.99 -€10.00 Price €17.99

SparkFun Altavoz Hamburger

SparkFun Hamburger speaker is a high quality speaker in a small form and with even smaller price. You wouldn't believe you can get a quality product for less than 7€, right? Well, we couldn't believe that as well, but SparkFun makes that possible.

SP022

Price €7.99

SparkFun Ardumoto - Motor Driver Shield

The Ardumoto Shield was created based on the L298 H-bridge as a two-motor controller for Arduino. It was designed to be able to drive two DC motors up to 2A per channel. Together with its Arduino, it will provide the perfect platform to control RC vehicles, or small autonomous robots. Its use has been made easier, LEDs with control signal have been added and the possibilities for advanced users have been increased.

SP011

Price €23.99

SparkFun Biomedical sensor pad set 10pcs

This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel.

This is not a medical device and is to be used for strictly educational purposes.

SP029

Price €12.95

SparkFun DataLogger IoT - 9DoF

SparkFun DataLogger IoT - 9DoF is a pre-programmed data logger to automatically log IMU, GPS and various pressure, humidity and distance sensors - all without having to write a single line of code! DataLogger automatically detects, configures and logs Qwiic sensors. It is specifically designed for users who only need to capture a large amount of data in a CSV or JSON file and return it to their larger project.

SP099

Price €94.90

SparkFun ESP32 Thing

The SparkFun ESP32 thing is an upgrade to boards based on the popular ESP8266. What the 32 version has to offer on top? Well one of the largest upgrades is support for Bluetooth communications and nearly 30 I/O pins. Makes it pretty perfect for any IoT solution, right?

SP009

Price €27.99

SparkFun ESP8266 Thing - Dev Board (wo headers)

ESP8266 Thing Dev board from Sparkfun is a reliable, strong solution for IoT projects. The ESP8266 is a well-known WiFi controller from the boards such as NodeMcu and or WeMos. This board increases the reliability to maximum though. This version comes without headers.

SP007

Price €25.99

SparkFun FTDI Basic Breakout - 3.3V

This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards.

SP024

Price €19.99

SparkFun FTDI Basic Breakout - 5V

This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards.

SP023

Price €19.99

SparkFun GPS Breakout

This small GPS breakout is yet another Qwiic module from SparkFun as per usual based on I2C - meaning that you can keep your serial port free for other applications. The board features XA1110 GPS module from GTOP and MediaTek MT3333 chipset already loaded with SparkFun firmware enabling clean and easy use of both ports. 

SP034

Price €65.99

SparkFun IoT RedBoard - ESP32 Development Board

SparkFun IoT RedBoard development board compatible with Arduino. It incorporates an ESP32 chip with a 32-bit dual-core Xtensa LX6 microprocessor with a clock frequency of up to 240 MHz. It enables WiFi and Bluetooth wireless communication, making it versatile for Smart Home and IoT projects.

SP048

Price €45.49

SparkFun MEMS Microphone Breakout - INMP401 (ADMP401) - obsolete

Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies.

SP021

SparkFun Pi AVR Programmer HAT - OBSOLETE

You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following.

The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects.

SP0017

SparkFun Pi Servo HAT - Obsolete

16 servo motors with one board seems impossible? With this board not only it isn´t impossible, but it even seems easy. Additionally, you won´t need to sacrifice any of your valuable GPIOs as the HAT connects directly via I2C. Additionally, you have a serial terminal connection at your disposal.

You can supply the power to the board through your Pi or directly if you are going for larger servos and would need a separate source of power. Simply scrap a small blob of solder on the isolation jumper.

SP0016

Price €16.99

SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 & MAX32664 (Qwiic)

This tiny little board features two chips from Maxim Integrated: MAX32664 and MAX30101. The 30101 Oximetry module  is the sensor on board responding for both oximetry and heart rate sesnsing. The MAX32664 is equipped with a Cortex M4 handling algorithimc calculations, digital filtering and automatic gain control. The board comes with I2C and SparkFun has provided to it Qwiic connectors for ease of use.

SP030

Price €52.99

SparkFun Qwiic Adapter

This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds

SP033

Price €1.89

SparkFun Qwiic HAT for Raspberry Pi

The Qwiic HAT is an absolute basic of Qwiic system for Raspberry. It enables a quick and efficient connection of an sensor to your Raspberry over I2C bus (GND, 3.3 V, SDA and SCL). As Qwiic enables daisy chaining of components, you can pretty much install as many sensors on the Qwiic HAT as you want. On top of that it fits perfectly Pi Tin enclosure from SparkFun enabling connection while in case.

SP031

Price €7.99

SparkFun Qwiic pHAT v2.0 for Raspberry Pi

QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! 

This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL).

A universal  2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano.

Note:  For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart.

SP0020

Price €7.99

SparkFun RedBot Sensor - Accelerometer

The accelerometer sensor is an add-on for your RedBot that provides shock and motion detection. The sensor works by measuring acceleration forces on the x, y and z axes. By measuring the amount of acceleration (or lack thereof), your robot can better understand its movements.

SP078

Price €8.99

SparkFun Triple Axis Accelerometer Breakout - LIS331

This board features and extremely low power LIS331HH accelerometer. The unit is a MEMS three axis linear accelerometer with a I2C- SPI serial interface enabling use with embedded applications. The range of measurement includes three options +-6g/+-12g/+-24g and enables datalogging with output rates fro 0.5 Hz to 1kHz. Check this and plenty of other accelerometers in our offering of both Sparkfun and other producers

SP003

Price €18.95

SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (wo headers)

Sensor used for measuring of the object acceleration in 3 axis in the range of either ±2g, ±4g or ±8g. It is powered with 1.95V to 3.6V. What sets this module apart is its user-friendliness, compatible size and low power consumption. it comes with headers attached

It is a version without headers of a popular BOB-09868 from SparkFun.

In our offer, we have a versuib with headers (SP0001) and with QWIC system (SP0005).

SP004

Price €16.99

SparkFun Weather Meter Kit

The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors.

SP090

Price €109.90

SparkFun WiFi Shield - ESP8266

The SparkFun WiFi ESP8266 Shield is a shield for Arduino R3 R3 board enabling internet connection. ESP8266 as you all know is a solid fundament for any IoT project an in this version it can be simply and easily put on your board. It is a great middle ground between the sole module and the development board such NodeMcu or WeMos. So if you need a relatively cheap and super reliable way to internet for your Arduino project - this is the shield for you! ESP8266 shield WiFi comes with an AT-command firmware, hence can be controlled by any UART. It works great with any Arduino R· layout. The shield doesn´t have the headers on.

SP006

Price €21.99

SparkFun XBee Explorer Dongle

SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables!

The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA.

SP038

Price €34.99

SparkFun XBee Explorer Dongle

SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables!

The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA.

SP039

Price €33.99