List of products by brand Termopasty

Showing 1-25 of 96 item(s)

Adhesive Thermal Paste Glue 10g CPU

Totally new and of high quality.
Dissipate the heat of the computer by refrigerating it effectively.
It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.
Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features:
  - Color white
- Surface drying time [25 ° C, min]: 2- 8
- Hardness: 45 -75
- Tensile strenght (Mpa): 2.0
- Elongation (%): 100
- Thermal Conductivity W / mk:> 1,0
- Volume Resistance (c-in / W): <2.0 x 10 * 15
- Dielectric strength (KV / mm): 20
- Dielectric Constant: 3.0
- Dielectric loss factor (60Hz): 0.003
- Operating temperature (max): 200 ° C

Q0006

Price €3.95

AG Extreme thermal grease 1g syringe

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. The application method guarantees simplicity of use, and the product can be easily applied to various computer accessories and LEDs. Ideal as a heat transmitter from the heat pipe condenser to the heat exchanger in a vacuum solar collector. Thermal conductivity: 6 W / mK.

Q0091

Price €3.75

AG Extreme thermal grease 3g syringe

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK.

Q0087

Price €6.85

AG Extreme thermal grease 4g flask

Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.
A special brush facilitates the application of the paste.
Diamond powder content: 10%
AG Extreme thermal grease 4g flask features:
- Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,
- Thermal impedance: <0.065 ° C in2 / W
- Specific gravity:> 2.4g / cm3,
- Evaporation: <0.001%,
- Fluency: <0.001%,
- Electrical conductivity: insulation,
- Viscosity: 1000 cP,
- Working temperature from -40ºC to + 300ºC,
- Supported temperatures: -40ºC to + 350ºC,
- Gray.
Mode of use:
- Store in a well ventilated, cool and dry place.

Q0088

Price €9.85

AG Gold thermal grease 3g syringe

AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.
This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.
Thermal conductivity:> 2.8 W / mK,

Q0090

Price €4.25

AG Silver thermal grease 1g syringe

AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive. Thermal conductivity:> 3.8 W / mK,

Q0092

Price €2.19

AG Silver thermal grease 3g syringe

AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK.

Q0089

Price €3.90

Alcohol PCB Cleaner 1l

Type of chemical preparation: alcoholic stripper of printed PCB plates.
Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.
has low impact on electronic components.
Alcohol PCB Cleaner 1l features:
- Form: liquid
- Capacity: 1l
- Alcohol PCB cleaner
PCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.
The liquid does not affect the substrate or components of the circuit board.

Q0043

Price €12.95

Assembling lubricant 100ml

Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity. It is designed to seal threaded connections in high pressure conditions and at elevated temperatures. Provides easy assembly and disassembly of connections. Prevents the seizure of threaded connections.

Q0099

Price €3.75

Ceramic Grease Spray 400ml

Ceramic Grease Spray, non-stick antifriction. The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C.
Application: Installation of boilers, furnaces, motors, heating systems, water pumps.

Q0096

Price €5.95

Ceramic Grease Spray Non-stick Antifriction 100ml

Ceramic Grease Spray Non-stick Antifriction 100ml features:
The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C. Prevents the €˜seizure€™ of metals. Anti-corrosion and anti-seizure properties - excellent protection. Facilitates dismounting of the pre-lubricated parts. It does not contain metal compounds or silicone. It is resistant to chemicals, water and weather conditions. Application:  - Installation of boilers, furnaces, motors, heating systems, water pumps
- Exhausts, manifold mounting screws, heads, hubs
- Breaking systems, ABS, ASR and ESP systems

Q0058

Price €3.65

Cleaning liquid for white boards 250ml

Liquid for cleaning LED boards.
The fluid quickly and effectively cleans even the most persistent dirt on the surface of the boards.
Eliminates traces of marker, scratches and discoloration resulting from long term use of the board.
Cleaning liquid for LED boards 250ml features:
- Manufacturer: AG Chemia,
Content:
- A 250ml aerosol.

Q0100

Price €4.79

Cleaning of AG Printer Spray 400ml

Cleaning of AG Printer Spray 400ml features:
- An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers

Q0061

Price €4.29

Compressed Gas 300ml Spray Cleaner

Compressed Air 300ml Spray Cleaner features:
- Cleaning computers, keyboards, electronics, printers
- All types of office material
- Made in the EU - HIGH QUALITY
- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices

Q0026

Price €3.95

Compressed gas 600ml Spray Cleaner

Compressed gas 600ml Spray Cleaner features:
- Cleaning computers, keyboards, electronics, printers
- All types of office material
- Made in the EU - HIGH QUALITY
- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices

Q0101

Price €6.59

Electrical Contacts Cleaner Spray + Brush Kontakt S 400ml

A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - manufactured in EU

Q0028

Price €6.99

Electrical Contacts Cleaner Spray Kontakt S 60ml

A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - Made in EU
- No to the most usual materials of electrical systems

Q0019

Price €2.49

Flux BORAX 500g

Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides.

Q0066

Price €3.95

Flux Colophony Rosin Core 100g

Flux Colophony Rosin Core 100g features:
Flux rosin, solid resin, neutral ph for correct electronic welding.
-Does not cause corrosion of non-ferrous metals
-Does not cause short circuits
-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners
-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics works
Use a toothpick for the application. Do not apply in excess.
SECURITY:
-Use in ventilated spaces. Do not inhale vapors that are released when welding
-Keep the pot tightly closed and out of reach of children
-Do not eat. It is not toxic
-Rarely irritating to skin contact

Q0012

Regular price €5.89 -€0.50 Price €5.39

Flux Colophony Rosin Core 40g

Flux Colophony Rosin Core 40g features:
Flux rosin, solid resin, neutral ph for a correct electronic welding.
- They do not cause corrosion of non-ferrous metals
- Does not cause short circuits
It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.
Use a toothpick for the application. Do not apply in excess.
Security:
- Use in ventilated spaces. Do not inhale vapors that are released when welding
- Keep the pot tightly closed and out of the reach of children
- Do not eat. It is not toxic
- Rarely irritating to skin contact

Q0011

Regular price €2.49 -€0.50 Price €1.99

Flux Gel Jeringa 1.4cm3 RMA Soldering BGA SMD SMT

Flux gel syringe 1.4cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases).

Q0018

Price €2.49