Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95
AG Extreme thermal grease 1g syringe The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. The application method guarantees simplicity of use, and the product can be easily applied to various computer accessories and LEDs. Ideal as a heat transmitter from the heat pipe condenser to the heat exchanger in a vacuum solar collector. Thermal conductivity: 6 W / mK. Code Q0091 Available Price €3.75
AG Extreme thermal grease 3g syringe The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK. Code Q0087 Available Price €6.85
AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €9.85
AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.Thermal conductivity:> 2.8 W / mK, Code Q0090 Available Price €4.25
AG Silver thermal grease 1g syringe AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive. Thermal conductivity:> 3.8 W / mK, Code Q0092 Available Price €2.19
AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK. Code Q0089 Available Price €3.90
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Last items in stock Price €12.95
Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity. It is designed to seal threaded connections in high pressure conditions and at elevated temperatures. Provides easy assembly and disassembly of connections. Prevents the seizure of threaded connections. Code Q0099 Available Price €3.75
Ceramic Grease Spray 400ml Ceramic Grease Spray, non-stick antifriction. The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C.Application: Installation of boilers, furnaces, motors, heating systems, water pumps. Code Q0096 Last items in stock Price €5.95