Resistor 10K Ohm 5% 0,25W 1/4W Resistor 10K Ohm 5% 0,25W 1/4W features:-10K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0021 Available Price €0.08
Digital Compass GY-273 Compas Magnetometer Three-axis electromagnetic field sensor module GY-273 including the HMC5883L chip that specifies the direction of the magnetic field of the ground. Digital Compass GY-273 Compas Magnetometer features: Supply voltage: 2.16 - 3.6 VDC, I2C interface with SCL, SDA, signals - Measurement range: 1.3 to 8 Gauss, Measurement resolution: 12 bits, Measurement accuracy: 0.73 - 4.35 Gauss, Transmission speed 400kHz, Sensitivity 230-1370 LSB / Gs, Output frequency: 75Hz, DRDY pin interruption, Dimensions of 18 mm x 13 mm. Code M0179 Available Regular price €3.79 -€0.50 Price €3.29
Rechargeable battery 9V 6F22 Li-ion 550 mAh micro USB Ready to Use Super capacious 9V battery made in Li-ion technology, direct charging possible via micro USB port! tested capacity - real capacity - min. 500 mAh, battery precharged to max. 30%. Code PP119 ✗ Out-of-Stock Regular price €11.99 -€1.00 Price €10.99
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €5.10
Photoresistor GL5516 LDR 10x Photoresistor 5mm GL5516 LDR 5-10k for Arduino.Photoresistor is a resistor whose resistance decreases when increasing the intensity of the light that falls on it. 10x Photoresistor GL5516 LDR features: - Model: GL5516- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 90mW.- Resistance with light (10lux): 5-10KΩ- Resistance with darkness (0lux): 0.5MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC Code S0012 Available Price €0.15
Power Supply Transformer 220V AC/DC 2A 9V Power Supply Transformer 220V AC/DC 2A 9V features:- Input voltage: 100 ~ 240V 50Hz- Output voltage: DC 9V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0098 Available Price €3.99
Display OLED 0.96" 128x64 White I2C 4 Pin Display OLED 0.96" 128x64 White I2C 4 Pin features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degree - Screen color: white - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ... - It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface. - The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver. Code P0091 ✗ Out-of-Stock Regular price €6.50 -€2.51 Price €3.99
Raspberry Pi 4 Modelo B 2GB RAM The Raspberry Pi 4 Model B is the latest product in the Raspberry Pi family of computers. This product is in the 2GB RAM version, with 4GB (B0069) and 1GB (B0067) versions also on offer. Code B0068 ✗ Out-of-Stock Price €89.99
Purple 3D-pen for ABS / PLA filaments Purple 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Purple 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: purple, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0153 ✗ Out-of-Stock Regular price €23.99 -€2.00 Price €21.99
Yellow 3D-pen for ABS / PLA filaments Yellow 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Yellow 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: yellow, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0152 Last items in stock Regular price €23.99 -€2.00 Price €21.99
PLA Set of 20 colors Filament 1.75mm x 5m PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0301 ✗ Out-of-Stock Price €11.70
ABS 20x Colors Filament 1.75mm 5m ABS 20x Colors Filament 1.75mm 5m features:- Ideal for 3D printing pen- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0300 ✗ Out-of-Stock Price €11.00
Pink 3D-pen for ABS / PLA filaments Pink 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Pink 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: pink, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0154 ✗ Out-of-Stock Regular price €23.99 -€2.00 Price €21.99
Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0303 ✗ Out-of-Stock Price €29.99
Purple 3D-pen for ABS / PLA filaments Purple 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Purple 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: purple, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0153 ✗ Out-of-Stock Regular price €23.99 -€2.00 Price €21.99
Yellow 3D-pen for ABS / PLA filaments Yellow 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Yellow 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: yellow, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0152 Last items in stock Regular price €23.99 -€2.00 Price €21.99
PLA Set of 20 colors Filament 1.75mm x 5m PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0301 ✗ Out-of-Stock Price €11.70
ABS 20x Colors Filament 1.75mm 5m ABS 20x Colors Filament 1.75mm 5m features:- Ideal for 3D printing pen- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0300 ✗ Out-of-Stock Price €11.00
Pink 3D-pen for ABS / PLA filaments Pink 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Pink 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: pink, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0154 ✗ Out-of-Stock Regular price €23.99 -€2.00 Price €21.99
Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0303 ✗ Out-of-Stock Price €29.99