Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €69.90 -€20.00 Price €49.90
Resistor 1K Ohm 5% 0,25W 1/4W Resistor 1K Ohm 5% 0,25W 1/4W features:-1K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0013 Available Price €0.08
HC-SR04 Ultrasonic Sensor Distance Measuring Module It is very easy to make it work with an Arduino, PIC or any other microcontroller. In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle. HC-SR04 Ultrasonic Sensor Distance Measuring Module features: - Supply voltage: 5V (4.5V- 6V) - Consumption: 30 mA typical, (35 mA max) - Interface: VCC , GND, Signal - Range: 2 cm to 3 meters - Angle 15º - LED indicator of measurement in progress - Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm - Quantity: 1 unit Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry: Automatic robot operation with obstacle detection /> Code S0007 Available Price €1.79
Grove - Yellow Wrapper 1*2(4 PCS pack) Grove - Wrapper is a kind of wrapper for repairing and protecting Grove modules. It will save you a lot of work in aligning your modules and make it easy for you to display your project. Code SS020 Available Regular price €2.49 -10% Price €2.24
Rechargeable battery 9V 6F22 Li-ion 550 mAh micro USB Ready to Use Super capacious 9V battery made in Li-ion technology, direct charging possible via micro USB port! tested capacity - real capacity - min. 500 mAh, battery precharged to max. 30%. Code PP119 ✗ Out-of-Stock Regular price €11.99 -€1.00 Price €10.99
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
Arduino compatible UNO R3 board - It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features: - Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal - Microprocessor: ATmega328 - Operating voltage: 5V - Input voltage (recommended): 7-12V - Input voltage (limits): 6-20V - Clock speed: 16 MHz - Digital I / O Pins: 14 - Analog input pins: 6 - DC current per I / O Pin: 40 mA - DC Current per Pin 3.3V: 50 mA - Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328 - SRAM 2 KB - Atmega328 Code B0009 Available Price €9.95
Grove - Universal 4 Pin 20cm Unbuckled Cable (5 PCs Pack) These cables are compatible with all modules included in the Grove system, quick connect for modules, sensors and more. 5 cables are included in this package. Forget soldering and bad connections. Code SS019 Available Regular price €2.49 -10% Price €2.24
Micro:bit Tinker Kit for micro:bit - Octopus sensors Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Regular price €91.90 -€15.00 Price €76.90
Micro:bit gold finger adapter Size: 57.0mm * 23.6mm Weight: 9.8g Code RA041 ✗ Out-of-Stock Price €5.75
SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €109.90
micro:bit Smart Health Kit With the micro:bit Smart Health Kit you will build items such as UV light detections, sitting posture reminder, alcohol detector, smart bin and more, from which we can learn how to program and how to maintain healthy living habits in a scientific way. Code EL0116 Last items in stock Price €59.90
FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi and Bluetooth) FireBeetle 2 ESP32, specially designed for IoT, is a main controller board based on ESP-WROOM-32D with dual-core chips. The FireBeetle microcontroller is compatible with Arduino Uno. It integrates the ESP-WROOM-32 dual-core module, which supports MCU, WiFi and Bluetooth communication. Code DF026 Available Price €11.95
Construction kit 32 IN 1 micro:bit - Wonder Building kit With this 32 in 1 construction kit you can build all 32 options or develop your imagination by building your own project. Note: the micro:bit board is not included, you can buy it separately. Code EL0112 ✗ Out-of-Stock Regular price €94.95 -€5.00 Price €89.95
CR123A Li-ion battery holder for robot Maqueen This is a lithium-ion battery holder specially designed for the educational robot micro: Maqueen bit. This lithium-ion battery holder integrates the charging circuit and MicroUSB interface, freeing users from the purchase of an additional charger. Code DF010 Available Price €9.90
Robot Maqueen Lite - Push Turn your Maqueen into an excavator with this mechanical push kit. You can then use it for applications such as football matches, venue cleaning, etc. With a simple installation, it's ready to go. This play and learn kit comes with a wealth of mechanical knowledge, which will allow students to benefit a lot from hands-on practice. Come and find the most fun and interesting ways to play with Maqueen in this kit. Code DF007 Available Price €14.49
Keyestudio Microbit Starter Smart Home Kit with micro:bit board This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit includes the micro:bit board. Code RA168 Available Regular price €103.49 -€18.50 Price €84.99
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €69.90 -€20.00 Price €49.90
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €69.90 -€20.00 Price €49.90
BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.2 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €20.95 -€1.00 Price €19.95
BBC micro:bit V2.2 Go - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Regular price €23.95 -€0.96 Price €22.99
Gravity: Analog pH Sensor/Meter Kit V2 DFRobot Gravity: The V2 analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF003 Last items in stock Price €57.80
Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89
NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Regular price €180.49 -€30.50 Price €149.99
Keyestudio Microbit Starter Smart Home Kit with micro:bit board This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit includes the micro:bit board. Code RA168 Available Regular price €103.49 -€18.50 Price €84.99
Ring:bit Car v2 Kit : DIY programming smart car for micro:bit The ELECFREAKS Ring:bit Car is a small DIY smart car powered by the BBC micro:bit. Manual installation can better exercise children's skills. The makecode graphical programming blocks allow children to learn programming from simple to complex in a fun way. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0102 Available Price €29.49
Keyestudio Microbit Starter Smart Home Kit This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit does not include the micro:bit board. Code RA170 Available Regular price €82.99 -€17.00 Price €65.99
SparkFun micro:climate kit for micro:bit - v3.0 The SparkFun micro:Climate kit is a complete weather station kit that builds on the weather:bit carrier board with weather and soil moisture sensors, all powered by the micro:bit. board. Code SP073 Backorder Price €179.00
KittenBot Silicone Kitty Case yellow for micro:bit Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Code RA176 Available Price €4.90
Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96