LED Module Full Color RGB Bulb KY-016 This module specially designed for Arduino will allow you to generate a light of any color (RGB) quickly and accurately. The LED Bulb Module RGB, consisting of an LED capable of creating any color using RGB, has a PWM voltage input with three pins. These are capable of shining in a wide range of colors thanks to the mixture of the three colors. primary (red, green and blue). These types of diodes are called RGB and are made up of three red, green and blue diodes in the same package. Thanks to the variation of the intensity of these three diodes, we can create a composition of colors. With this led you can handle more than 16.5 million colors. Code M0081 Available Price €2.95
Battery Holder 6x AA with DC Connector 9V LR06 Ideal to power your Arduino board.Battery Holder 6x AA with DC Connector 9V LR06 features:- Cable 12cm long,- Measures 90x 55x 15mm,- Max 50mm pile length,- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7). Code PP008 Available Price €1.85
Connectors 10x BLS06 Female / Female 6 Pins RoHS Single Row Connectors 10x BLS06 Female / Female 6 Pins RoHS Single Row features: - Step between pins: 2.54 mm- Number of connections: 6 in a single row- Type: female / female- RoHS standard- Quantity: 10 units Code K0122 Available Price €0.13
ESP8266 5V WiFi Relay Module AP Remote Control + STA You can easily control any device over the Internet through your phone, computer, etc. The module can handle 5 users at the same time, it can work in two modes: STA (client) and AP (access point). In AP mode, the module is connected via WIFI directly to your phone or computer (in open field can be up to 300 meters). In STA mode, the relay module is connected to the access point (router) that supplies the network. Wi-Fi in the room where the relays are located. In this case, the range mainly depends on the power of the access point antennas (routers). You should not turn off after the configuration is completed, as some of the parameters of the WIFI module cannot be saved when power is cut off. Code W0067 Available Price €9.49
Male Double Row 80 Pin Header 2x40 Male Double Row 80 Pin Header 2x40 features:- Type: Male- Insertion position: Vertical- Separation between pins: 2.54mm- Quantity: 1 unit 2x40 pins Code K0150 Available Price €0.99
40x Cables Female-Male 20cm 40x Cables Female-Male 20cm features: -Length: 20cm-Quantity: 40 cables-Connectors have male and female header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0008 Available Price €2.49
Screen OLED 0.96" 128x64 White SPI I2C 7 Pin Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption: 0.08W - Operating temperature: -20 to 70 ºC - PCB board dimension: 27 x 27mm - Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. - OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc. Code P0026 Available Regular price €5.00 -€1.50 Price €3.50
PLA Filamento 1.75mm 0.85kg Purple color púrpura Premium Bobina para Impresora 3D Code I0412 Backorder Price €17.49
Raspberry Pi 400, PC embedded in a keyboard - Spanish (ES) Raspberry Pi 400 is the ideal tool, both educational, perfect for students of all ages, and for personal use. This RPi based on model 4, offers a low cost and portable solution, being ideal for home study and for teaching computer concepts such as programming, physical computing and networking. The Raspberry Pi 400 has a quad-core ARM Cortex A72 processor with 4GB of RAM, an Ethernet socket, 3 USB ports, two microHDMI ports and a 40-pin GPIO. Keyboard Spanish version Code RA112 Available Regular price €95.90 -€20.91 Price €74.99
Arduino NICLA Sense ME Nicla Sense ME is the smallest Arduino-developed board equipped with a range of the latest Bosch environmental and motion sensors. The module is based on the nRF52832 ARM Cortex M4 chip clocked at 64 MHz with 512 kB of Flash, 64 kB of RAM and 2 MB of SPI Flash and 2 MB of QSPI embedded memory. The Nicla Sense ME features the Bosch BHI260AP, BMP390, BMM150 and BME688 embedded sensors. Code ABX00050 Last items in stock Price €95.59
USB / micro USB cable 3A 1m white Cable USB / micro USB con soporte de carga de hasta 3A (máx.), perfecto para renovar la energía de dispositivos móviles como smartphones y tabletas. Code KH008 Available Price €2.49
DS18B20 Digital Temperature Sensor Probe 5m Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 5m. DS18B20 Digital Temperature Sensor Probe 5m features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 °C to 125 °C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Vcc red - Yellow digital output- Inocidable steel- Cable length: 5m Code S0134 Available Price €7.95
GY-MAX4466 MAX4466 Electret Microphone Adjustable Amplifier Module The module is equipped with an electret microphone with a sensitivity in the range of 20-20 kHz and the amplification is used in the Maxim MAX4466 integrated circuit, an operational amplifier specially designed for use as a microphone preamplifier. Code M0214 Available Regular price €5.95 -€1.00 Price €4.95
3-in-1 USB cable - Lightning / USB Type-C / micro USB The perfect accessory for all devices with USB Type C, micro USB and Lightning ports. Why buy 3 different cables when you only need one. Code KH002 Available Price €9.90
PMS5003 High Accuracy Particle Concentration Sensor The sensors can be integrated into a variety of instruments associated with a concentration of airborne particles to improve equipment, provide timely concentration, and have Exact data. Present the laser that scatters products on airborne particles, at the same time at a specific angle collect scattered light, changing the intensity curve that scatters over time. The microprocessor uses the algorithm based on the MIE theory to deduce the grain size contained in the air and the concentration of the particles per unit and quantity. Characteristic: - Power supply: 4.5-5.5 VDC - Measurement range: 0.3-1.0ï¼ ›1.0-2.5ï¼› 2.5-10 µm (micrometer) - Accuracy of count: 50%@> Code S0046 Available Price €27.90
SparkFun ESP32 Thing The SparkFun ESP32 thing is an upgrade to boards based on the popular ESP8266. What the 32 version has to offer on top? Well one of the largest upgrades is support for Bluetooth communications and nearly 30 I/O pins. Makes it pretty perfect for any IoT solution, right? Code SP009 Last items in stock Price €27.99
Gravity: Analog TDS Sensor/ Meter for Arduino Arduino compatible analog TDS (Total Dissolved Solids) sensor to measure water hardness, water purity. It can be used to test water quality in domestic, hydroponic and other applications. Measures TDS from 0 ppm to 1000 ppm. Power supply from 3.3V to 5.5V. Code DF028 Available Price €15.99
Electronic Components Kit for Arduino UNO Mega Kit electronic components for Arduino UNO Mega.It allows to build various projects of various complexity, from the easiest ... to the most complicatedThe elements are placed in the box to keep everything in order. Characteristic: It includes the following module references: - 1x Protoboard Breadbord 400 points Arduino- 20x Male-Male Cables 20cm Jumpers Dupont 2,54- 1x LED Diode Assortment Kit 30 pcs 5mm red, green, yellow- Resistors: - 10x Resistors 200R Ohm 5% 0,25W 1/4W - 10x Resistors 1K Ohm 5% 0,25W 1/4W - 10x Resistors 10K Ohm 5% 0,25W 1/4W - 10x Resistors 100K Ohm 5% 0,25W 1/4W- 2x Photoresistor GL5516 LDR- Push switch buttons: - 1x Push Switch Button B3F Omron Blue Key 12mm Code B0039 Available Price €11.14
Cables with Crocodile Clips pack 10pcs Include 5 different colors, 1 unit of each color.Also available in batches of 5 and 2 cables. 10x Cables 50cm with Crocodile Clips features: -Length: 50cm-Colors: red, green, white, black and yellow-Cable diameter: 1,5mm -Quantity: 10 cables Code K0013 Available Price €2.95
BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.2 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €20.95 -€1.00 Price €19.95
BBC micro:bit V2.2 Go - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Regular price €23.95 -€0.96 Price €22.99
Wireless Module AT-09 Bluetooth 4.0 CC2541 IOS BLE - Bluetooth 4.0 AT-09 BLE Master / Slave module with 6-pin connection base - This module is very similar to HM-10 module - Bluetooth protocol: Bluetooth V4.0 BLE specification - Ultra-low power consumption, in 90uA standby mode Wireless Module AT-09 Bluetooth 4.0 CC2541 IOS BLE features: - Chipset based on CC2541 - Bluetooth Class 2 - Industrial level Bluetooth module SPP - Flash 256Kb - Integrated chip antenna - Power supply: + 3.3 VDC 50 mA - Working temperature: -5 C to + 60 C - Operating frequency: 2.4 GHz ISM Band - Modulation method: GFSK (Gaussian Frequency Shift keying) Code W0078 Available Price €4.95
USB-C Cable 1.8m USB to USB type C cable, this model of data cable is also very suitable for exchanging documents, photos and music with your smartphone or computer. It can be used for tablets, smartphones or any device that has a USB-C socket. Code K0307 Available Price €3.19
Official Raspberry Pi Keyboard, Red/White, US Official Raspberry Pi keyboard suitable for all Raspberry Pi products. Comfortable ergonomic design. Code RA173 Last items in stock Price €22.95
MyoWare 2.0 Muscle Sensor Basic Kit Sparkfun sensor MyoWare® 2.0 from Advancer Technologies is a newer version of this producer's bestseller. The MyoWare 2.0 muscle sensor included in this kit has been redesigned from the ground up with a new compact and easy-to-use design, and has been updated with the latest, most advanced chipset to improve sensor performance and reliability. In addition, MyoWare has developed a range of shields that work with the sensor (in our LED shield offering, displaying sensor readings as LED lights). Code SP044 Available Price €121.95
Joystick Breakout Board for BBC Micro:Bit The joystick board can be used to simulate the mouse keyboard. The 3V, G, P0 and P1 are connected to a card micro: bit to imitate the serial port. This board consists of 6 buttons and joystick. Connect the joystick and buttons to the micro: bit pins. Code RA040 Available Price €9.95
Acrylic Box for Arduino Mega2560 Protection box for Arduino Mega2560 made with high quality acrylic material. Arduino Mega2560 Acrylic Box features: - Compatible with Arduino Mega2560 - Material: transparent acrylic - External dimensions: 112x 65x 18mm Code B0007 Available Price €1.95
SparkFun Qwiic Adapter This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds Code SP033 Available Price €1.89
Raspberry Official power supply for Raspberry Pi 4, USB-C 5V 3A The official Raspberry 4 power supply with USB-C connector up to 3.1 A in white. Code RA067 Available Price €8.85
Led Matrix 8x8 MAX7219 Soldier Led Matrix 8x8 MAX7219 Soldier features: - MAX7219 controller module with 8x8 led matrix + cables - 8X8 LED matrix controlled by MAX7219 chip - Led 3mm red color - SPI communication - Voltage: 4.7 - 5.3V DC - Interfaces to manage multiple modules in cascade - Matrix dimensions: 32mm x 32mm x 8mm - PCB dimensions: 32mm x 50mm Code M0043 Available Price €2.95
64GB Class 10 MicroSD memory card with adapter 64GB Class 10 MicroSD memory card with adapter features: - 64GB capacity - Class 10 - MicroSD dimensions 11mm x 15mm x 1mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0015 Available Price €9.80