Panasonic rechargeable battery NCR18650A 3100mAh Li-ion
  • Panasonic rechargeable battery NCR18650A 3100mAh Li-ion
  • Panasonic rechargeable battery NCR18650A 3100mAh Li-ion

Panasonic rechargeable battery NCR18650A 3100mAh Li-ion

PP128

Panasonic rechargeable battery NCR18650A 3100mAh Li-ion 3,6V. One of the most popular batteries on the market!

The battery sold has no electronic protection against overcharge and deep discharge.

Panasonic
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Panasonic rechargeable battery NCR18650A 3100mAh Li-ion 3,6V features:

- Nominal capacity: 2950mAh (0.2C, 2.5V discharge)
- Minimum capacity: 3100mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: CC-CV (constant voltage with limited current )
- Charging current: standard charge: 1475mA,
- Charging time: standard charge: 4 hours,
- Max. Discharge current: 5900 mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.5V
- Cell weight: 47.5g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum
- Operating temperature: charge: 0 to 45 ° C, discharge: -20 to 60 ° C
- Storage temperature: 1 year: -20 ~ 25 ° C, 3 months: -20 ~ 45 ° C, 1 month: -20 ~ 60 ° C


Precautions:


- Do not load above 4.2V,
- do not discharge below 2.5V,
- do not change polarity,
- do not heat the battery, or expose it to high temperatures,
- Do not get wet or expose to high humidity environments,
- IMPORTANT: This battery does not have a protection circuit.
- Use it under your responsibility.
- For long periods of storage it must be stored by below 45 ° C
- After long periods of storage you will probably need to do some charging cycles to au Ment capacity again.
- Quantity: 1 unit.

Data sheet

Capacidad
3400 mAh

Customers who bought this product also bought

5V supply module with 2A step up output DM13

Power supply module step up with fixed output 5 VDC accepting a maximum current of 2A.
Works with frequency signals up to 1.2 MHz.
Characteristic:
- Input voltage range: 2 - 5 VDC,
- Fixed output voltage: 5 VDC,
- Output accuracy: ± 0.1 V,
- Maximum output current: 2A,
- Ripple at full load: Vpp & lt; 70mV,
- Operating temperatures: -40ºC - + 85ºC,
- PCB size: 17x13mm.

A0092

Price €5.49

TP4056 Module Lithium Battery Charger with Protection Micro USB

TP4056 Module Lithium Battery Charger with Protection features:
- TP4056 Li-Ion Micro USB Charger
- Upgraded version of previous TP4056
- Micro USB connection to charge directly from the PC
- Ideal for 18650 batteries
- Based on the TC4056A regulator
- Input Voltage: 4.5V - 5.5V DC
- Full charge voltage: 4.2V +/- 1.5%
- Max Output Current: 1A
- Overvoltage protection 4.2V
- Over discharge protection 2.4V
- LED indicator: charging blue, charging red
- Operating temperature: -10ºC to + 85ºC
- IN + and IN- connection for electronic circuits
- Overcurrent protection: 3A
- Measurements 26 x 19 x 5 mm
- Possibility of current change through Rprog

A0026

Price €1.69

2x Female 40-Pin Long Strip

2x Female 40-Pin Long Strip features:
- Pin spacing: 2.54mm
- Pin length: 10.5mm
- Insert position: vertical - Insertion: through
- Quantity: 2 units of female strips of 40 pins each

K0085

Price €0.95

Current Sensor ACS712 AC/DC 20A Hall Current Ammeter

Sensor used to measure the current in the circuit to which it is connected.
It is based on the ACS712 chip, capable of measuring intensity in both DC and AC. Current Sensor ACS712 AC/DC 20A Hall Current Ammeter features:
- Output: Analog
- Power: 5V
- Accuracy: 1.5%
- Measuring capacity: +/- 20A
- Dimensions: 31 x 13 mm

M0105

Price €2.99

BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer

The novelty of micro:Bit v2.2 for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker.

It contains a quick start guide in the same package.

B0120

Regular price €20.95 -€1.00 Price €19.95

UNO Board CH340 clone

- It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: USB female Type B

B0011

Price €7.49

Screw Shield V1 for Arduino UNO y MEGA

Screw Shield V1- Arduino ScrewShield UNO y MEGA features:
Screw Shield V1 allows: - Being punctured directly to an Arduino Uno, Mega, Leonardo plate
- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more.

M0173

Price €3.95

Lead Screw with Trapezoidal Nut T8 80cm L8

Lead screw and stainless steel screw set with KFL08 T8-800 for 3D printer. Its shaft coupling diameter is 8mm with pitch of 2mm and has a length of 800mm Lead Screw with Trapezoidal Nut T8 80cm L8 features:
- Type: Trapezoidal screw
- Diameter: 8mm
- Toothing distance: 2mm - Rotation total: 8mm - Lengths: 800 mm Kit contents: 
- Nut 1 unit
- Spindle 1 unit

I0148

Price €14.95
€8.75

7,23 tax excl.

Tax included 1
Last item
Price €8.75

Order until 4pm we will send today
30 days return