Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion
  • Rechargeable battery XTAR 18650 3000mAh Li-ion

Rechargeable battery XTAR 18650 3000mAh Li-ion

PP054

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life Rechargeable battery XTAR 18650 3000mAh Li-ion features:
- the cell used: Panasonic-Sanyo
- capacity: 3000mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.5A
- recommended maximum discharge current 4.5A
- maximum charge voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm - weight 48.5g - quantity: 1 unit

XTAR
6952918344681
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life

Rechargeable battery XTAR 18650 3000mAh Li-ion features:

- the cell used: Panasonic-Sanyo
- capacity: 3000mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.5A
- recommended maximum discharge current 4.5A
- maximum charge voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm

- weight 48.5g

- quantity: 1 unit

Data sheet

Capacidad
3000 mAh

Customers who bought this product also bought

5x Strip 16 Pin Female Short

5x Strip 16 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 5 units of strips of 16 female pins each

K0141

Price €0.26

FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable

A virtual serial port to your PC through the USB port. FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable features:
- USB-Serial TTL 3.3V -5V Converter
- LED indicator for Tx, Rx, power supply
- Communication: Transceiver RX / TX TTL COM Virtual RS232
- Voltage: 3.3V or 5V - via jumper
- Pins: DTR, RX, TX, VCC, CTS, GND
- Protections: Electronic fuse up to 500mA
- Size: 35 x 17 mm Pitch 2,54mm
- Connection: Mini USB. Driver: W98 / W2000 / W2003 / W2008 / WinXP / WinVista / W7 / W8 / Linux / Mac
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
User manual for remote control + 4-channel receiver 315 MHz IC2262
- Wire the USB />

C0007

Price €3.95

DS18B20 Submersible Probe Sensor Temperature

Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.
DS18B20 Submersible Probe Sensor Temperature features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Red Vcc
      - Yellow digital output
- Inocidable steel
- Cable length: 1m

S0019

Price €2.39

5x Female Strip 20 Short Pins

5x Female Strip 20 Short Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 5 units of strips of 20 female pins each

K0140

Price €0.39

Digital Light Intensity Sensor with Photo Resistance with LM393 Controller

This photo-resistance module is very sensitive to ambient light. Activation of the microcontroller or retransmission modules,
The brightness module of the ambient light reach the set threshold, the output is high when the ambient light exceeds the set threshold.
The DO output can be connected directly to a microcontroller to detect the light environment and create a light control switch.
It has a speed range of 0% to 100%. Digital Light Intensity Sensor with Photo Resistance with LM393 Controller features:
- Operating voltage: 3.3 - 5 V
- Input current: 50 mA
- Use a very sensitive photo resistance
- Use a LM393 wide voltage comparator, high quality output signal
- Adjustable potentiometer can regulate the brightness of detected light

M0156

Price €1.69

Converter module AMS1117 Buck fixed output 5V 800mA

This module is a voltage regulator that creates an output voltage of 5V with a maximum current of 800mA. The integrated regulator is referenced AMS1117.
The module has two two point connectors for quick connection. Converter module AMS1117 Buck fixed output 5V 800mA features:
- Based on the regulator AMS1117-5V
- Input voltage: 4.5-12VDC
- Output voltage: 5VDC (+/- 0.05V)
- Max output current: 800mA
- Operating temperature: -40C to + 150C
- PCB size: 25x12 mm

A0073

Price €1.49
€13.99

11,56 tax excl.

Tax included 1
Last 3 items
Price €13.99

Order until 4pm we will send today
30 days return