Crocodile Banana Connector Medium Black
  • Crocodile Banana Connector Medium Black

Crocodile Banana Connector Medium Black

K0123

It is used to pass the current, power electrical and electronic circuits, fans, motors, among others. Crocodile Banana Connector Medium Black features:
- Color: black
- Total length: 53 mm
- Includes 1 unit

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Crocodile Banana Connector Medium Black description


It is used to pass the current, power electrical and electronic circuits, fans, motors, among others.

Crocodile Banana Connector Medium Black features:


- Color: black
- Total length: 53 mm
- Includes 1 unit

Customers who bought this product also bought

Cable 1x1.5 Flexible Single-pole 1.5mm green-yellow 1m

Characteristic: -Low voltage electric cables
-Normal: EN 50525-2-31
-Number of conductors: 1x1.50mm2
-Service voltage: 450 / 750V
-Service temperature: at 70ºC
-Resistance at 20ºC: 13.3 Ohm / Km
-Weight (Kg / Km): 21
-External diameter: 3.4mm

-Length 1m

K0043

Price €0.89

Motor Nema 17 4.28kg 17HS4401

It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 4.28 kg/cm. It comes with a 1m cable. We have the best stepper motors at the best prices! 

I0020

Regular price €9.50 -€1.55 Price €7.95

Pro Micro 5V 16Mhz Arduino Compatible Board

It has an ATMega32U4 chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can solder only the pins we need. Characteristic: - Microcontroller: ATmega32U4
- Operation: 5V
- Power (max): 5-12V
- Total I / O pins: 20
- PWM pins: 5
- Analog pins: 12
- Maximum current of I / O pins: 40 mA
- Maximum current of pin 3.3V: 50 mA
- Flash memory: 32 KB (4 KB used by the bootloader)
- SRAM: 2.5 KB
- EEPROM: 1 KB
- Speed: 16 MHz
- external interrupt
- TWI / I2C, UART, SPI interfaces
- Dimensions: 18x33mm
- Weight: 30 grams

B0022

Price €7.84

Liquid Flux for Alcohol-Based Rosin Welding 15ml

Liquid Flux for Alcohol-Based Rosin Welding 15ml features:
- Flux liquid alcohol-based for electronic welding
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- Capacity: 15ml
- Content of solid bodies 0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

Q0020

Price €1.61

TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK

TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 26x26x0,3mm

Q0074

Price €0.41

XM-15B Bluetooth Serial Port Module Master Slave Arduino compatible HC-05/06

XM-15B Bluetooth Serial Port Module Master Slave Compatible Arduino HC-05/06 features:
* Power 3.0V -6V
* 3.3V / 5V logic levels
* Bluetooth version V2.1 + EDR
* Frequency: 2.4GHz ISM band
* Reach approx. 30m
* Security: Authentication and encryption
* Supports AT commands for configuration through a serial port
* Working temperature: -20 ºC to +75 ºC
* Working current - 50 mA
* PCB dimension: 35 x 19m -Using the conventional Bluetooth CSR chip, the protocol standard Bluetooth V2.1 + EDR, passes the Bluetooth BQB certification
-Fast start, only 0.3 seconds to complete the initialization of the complete module (including the Bluetooth protocol stack)
- Built-in hardware protector, never hangs

W0022

Price €6.19

Cable 1x0.35 Flexible Single-pole 0.35mm blue 3m

Characteristic: -Low voltage electric cables
-Normal: EN 50525-2-31
-Number of conductors: 1x0.35mm2
-Service voltage: 300 / 500V
-Service temperature: at 70ºC
-Resistance at 20ºC: 55.0 Ohm / Km
-Weight (Kg / Km): 7
-Outer diameter: 2.4mm

-Length 1m

K0035

Price €0.37

Voltmeter Amperemeter DC Red and Blue 100V 10A

Voltmeter Amperemeter DC Red and Blue 100V 10A features:
- Supply voltage: 4.5V to 30V
- Voltage measurement range: 0V to 100V (± 1%)
- Min voltage resolution: 0.1V
- Current measurement range: 0A to 10A (± 1%)
- Min current resolution: 0.01A
- Operating current: 5mA to 15mA
- Display: Red LED color (Voltage) and Blue LED color (Intensity)
- Includes reverse polarity protection
- Measurement refresh time: 500ms
- Screen dimensions: 48 x 29 mm
- Recessed hole: 45.5 x 26.5 mm
- Depth: 21 mm
- Cable length: 150 mm
- Operating temperature: - 10ºC to 65ºC
- No battery needed
- Dual panel with voltmeter and digital ammeter

M0068

Price €3.30
€0.32

0,32 tax excl.

1
30+ items
Price €0.32

Order until 4pm we will send today
30 days return