TinkerKit Braccio Robot Arduino  - Robot Arm 6 DOF
  • TinkerKit Braccio Robot Arduino  - Robot Arm 6 DOF
  • TinkerKit Braccio Robot Arduino  - Robot Arm 6 DOF
  • TinkerKit Braccio Robot Arduino  - Robot Arm 6 DOF
  • TinkerKit Braccio Robot Arduino  - Robot Arm 6 DOF

TinkerKit Braccio Robot Arduino - Robot Arm 6 DOF

T050000

The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel.

Discover the unlimited potential of robotics and mechanics with BRACCIO!

Arduino
7630049200609
T050000
Add to wish list

Description of the Arduino Kit:

The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel.

Discover the unlimited potential of robotics and mechanics with BRACCIO!

Features:

Power

It is recommended that the board be powered through the jack connection with a regulated 5 VDC at 4000 mA power supply included in the box.

There is an onboard voltage regulator for higher voltages that protects the Braccio shield.

*NOTE: The protection does not work for the Arduino Yun if you put the bridge between Vin and 5V on the Robot Arm Shield V1 (larger version of the so-called Braccio Shield and has a power switch on top of the Shield)

Content

  • Plastic parts x 21
  • Screws x 63
  • Flat washer x 16
  • Hexagonal nut x 7
  • Springs x 2
  • Servomotors: 2 x SR 311, 4 x SR 431
  • Arduino compatible shield x 1 
  • Power supply 5V, 4A x 1
  • Phillips screwdriver x 1
  • Spiral cable protection cover x 1

Physical characteristics

  • Weight: 792 g
  • Maximum operating range: 80 cm
  • Maximum height: 52 cm
  • Base width: 14 cm
  • Gripper width: 90 mm
  • Cable length: 40 cm
  • Load capacity
  • Maximum weight at an operating distance of 32 cm: 150 g
  • Maximum weight in the minimum Braccio configuration: 400 g

SpringRC SR431 - Dual output servo:

  • Control signal: Analogue PWM
  • Torque:
  • 4.8V: 169.5 oz-in (12.2 kg-cm)
  • 6.0V: 201.4 oz-in (14.5 kg-cm)
  • Weight: 2.19 ounces (62.0 g)
  • Dimensions: 1.65 × 0.81 × 1.56 inches (42.0 × 20.5 × 39.5 mm)
  • Speed:
  • at 4.8 V: 0.20 seconds / 60°.
  • at 6.0 V: 0.18 seconds / 60°.
  • Rotation support: Dual bearings
  • Gear material: Metal
  • Rotation range: 180°.
  • connector type: J (also known as Futaba)

SpringRC SR311:

  • Control signal: Analog PWM
  • Torque:
  • 4.8V: 43.13 oz-in (3.1 kg-cm)
  • 6.0V: 52.86 oz-in (3.8 kg-cm)
  • Weight: 0.95 ounces (27.0 g)
  • Dimensions: 1.23 × 0.65 × 1.13 inches (31.3 × 16.5 × 28.6 mm)
  • Speed:
  • 4.8V: 0.14 sec / 60°.
  • @ 6.0V: 0.12 sec / 60 °
  • Rotation support: Dual bearings
  • Gear material: Metal
  • Rotation range: 180°.
  • connector type: J (also known as Futaba)

Interesting links:

Datasheet of Braccio Robot

Guide

Guide to the selection of the best Arduino Kit for you

Customers who bought this product also bought

Rechargeable battery XTAR 18650 2200mAh Li-ion

Rechargeable battery XTAR 18650 2200mAh Li-ion features:
- With PCB protection circuit that protects the battery against overcharges and over discharges, increasing battery life
- Quantity: 1 unit
- Authentic Protection Battery

PP019

Price €8.99

Double Joystick Module 2 Axis XY PS2

Ideal for your arduino projects, but can also be used with other microcontrollers. Double Joystick Module 2 Axis XY PS2 features:
- Two axes (XY)
- Return to the center
- Central push button
- Connections: + 5Vcc / GND / VRx / VRy / SW
- Dimensions: 4 x 2.6 x 3.2cm

M0010

Regular price €2.50 -€0.31 Price €2.19

Connector Jack 2.1x5.5mm Power Supply DC Male

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Connector Jack 2.1x5.5mm Power Supply DC Male features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

K0023

Price €0.80

Scissors for PCB

Scissors for PCB enables precise cutting of universal PCB protoboard, plates and single and double-sided laminates up to 1.6 mm thick

H0335

Price €11.90

20x4 2004 LCD display PCF8574T I2C Backlit Blue

- It consists of a 20-character, 4-row display
- The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem
- Only two pins are needed for communication, SDA and SCL
- Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32
PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F
- It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2
20x4 2004 LCD display PCF8574T I2C Backlit Blue features:

- LCD screen, 20 characters and 4 lines
- 5V power supply
- HD44780 compatible controller

P0013

Price €8.49

Female DC Power Connector Jack 2.1x5.5mm

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

K0050

Price €0.49
€286.49
Save €30.00 €256.49

211,98 tax excl.

Tax included 1
Last 4 items
Regular price €286.49 Price €256.49

Order until 4pm we will send today
30 days return