Raspberry Official power supply for Raspberry Pi 4, USB-C 5V 3A The official Raspberry 4 power supply with USB-C connector up to 3.1 A in white. Code RA067 Available Price €8.85
5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat The 28BYJ-48 has everything you need to start using stepper motors in your projectA stepper motor converts digital impulses into small steps of movement in one direction The engine also comes with a ULN2003 engine controller cardCan control two DC motors or a bipolar stepper motor with a maximum amperage of up to 500 mAEquipped with state indicator LEDs A, B, C, D 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat features: - Engine model: 28BYJ-48- Phases engine: 4- Operating voltage: 5V- Frequency: 100 Hz- Operating current: 200mA- Max Power: 20W- Winding resistance: 70 ohm- Angle per step: 5,625º- Steps per round: 64- Torque: 0.3 Kgr / cm- Speed: 1900 rpm Code R0038 Available Price €2.95
DS18B20 Temperature Sensor 0.5ºC TO-92 Also available with waterproof casing and 100cm cable and 200cm. DS18B20 Temperature Sensor TO-92 0.5ºC Precision 5V Integrated features:- Device function: Temperature sensor- Type of output: Digital- Supply voltage: 3V to 5.5V- Accuracy: ± 0.5ºC- Temperature threshold: Programmable- Operating temperature: -55ºC to + 125ºC- Encapsulated: TO-92- Supply current: 1.5mA Code S0014 Available Price €1.95
MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features: - Booster module - The output voltage may be greater than the input voltage - Use a multimeter to check the output voltage and adjust the potentiometer - Input voltage: 2-24V - Output voltage: 5-28V - Current output: 2A - Operating temperature: -40ºC to + 85ºC - Conversion efficiency: up to 93% - Size: 17.5 x 30 mm Code A0065 Available Price €1.69
LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots features:- Supply voltage of the LED points: 1.8-2.4 VDC- LED color of the dots: red- Pin numbers: 16- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 120mA- Power consumed per segment: 80mW- Segment numbers (points): 64- Diameter of a point: 3mm- Operating temperature: -35 ° C - + 85 ° C- Storage temperature: -35 ° C - + 85 ° C- Screen with common cathode connection for the rows and common anode for the columns- Screen size: 32x32x8 mm Code P0125 Available Regular price €2.89 -€1.00 Price €1.89
4x 18650 3.7V Parallel Lithium Battery 4x 18650 3.7V Parallel Lithium Battery features: - Cable 10cm long - Measures 80x76x 20mm - Stack length max 67mm Code PP017 Available Price €2.89
Silicone welding mat with departments - AS11 450 x 300 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0213 ✗ Out-of-Stock Price €23.90
500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver 500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features: - HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends - High quality gold shielded connectors - Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality - Refresh rates up to 120Hz - Length: 500cm - Quantity: 1 unit Code RA038 Available Regular price €6.99 -20% Price €5.59
Helping Hand Magnifier LED Light with Soldering Stand A set of tools to facilitate soldering and other precision installation and electronic work. The base includes a sponge for cleaning the tip and a robust soldering iron holder. Two 'crocodile' holders and a wide magnifying glass with illumination are also available for use. Code H0570 Last items in stock Price €17.95
Electronic Antistatic Wrist Bracelet ESD Blue Electronic Antistatic Wrist Bracelet ESD Blue features: - Electronic Antistatic Bracelet, blue color- Protection against electrostatic charges- Adjustable bracelet with crocodile clip connector- Material: The conductive elastic band is made of nylon and woven in stainless steel- Extensible length up to 180 centimeters- Weight: 25 gr.- Quantity: 1 loose unit in plastic bag Code H0142 Available Price €1.85
Mini Soldering Iron Stand Mini Soldering Iron Stand features: - Mini Holder for tin soldering iron- Dimensions: 65x 40mm Code H0097 Available Price €0.85
Helping Hand Magnifier LED Light with Soldering Stand - ZD-126-3 Third hand stand with LED lamp and crocodile clips. It has a backlight with 5 bright LEDs and two additional mini-lights. Code H0571 Available Price €18.95
Silicone welding mat with departments - AS11 450 x 300 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0213 ✗ Out-of-Stock Price €23.90
Kontakt PCB PLUS spray 100ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 100ml features:- Shape: Spray- Capacity: 100mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0072 Last items in stock Price €3.95
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €9.95
Flux Welding Paste 20g Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C. - Flux paste based on activity rosin medium. - Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints . Operating temperature up to 350 C. Code Q0025 Available Price €1.89
Magnifying LED Lamp Lens 4 Inch Magnifying LED Lamp Lens 4 Inch features: - Diopter: 3D + 12D- Lens size: 4 inch- Lens material: glass- Light source: 15pcs LED- Standard mount: table base Code H0144 Available Regular price €30.00 -15% Price €25.50
Liquid Flux RF800 100ml Alcohol Based Rosin Welding Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:- Flux liquid alcohol based for electronic welding.- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- 100ml capacity- Content of solid bodies0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0022 Available Price €4.95
Kontakt PCB PLUS spray 100ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 100ml features:- Shape: Spray- Capacity: 100mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0072 Last items in stock Price €3.95
Flux Welding Paste 20g Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C. - Flux paste based on activity rosin medium. - Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints . Operating temperature up to 350 C. Code Q0025 Available Price €1.89
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €3.49
Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0115 ✗ Out-of-Stock Price €4.95
Flux Solder Paste in Tin Can 40g Flux Solder Paste in Tin Can 40g features: - Welding paste according to DIN EN 29454-1 1.1.2.C- Flux paste based on medium activity rosin- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0040 Available Price €2.29
Long Life Replacement Tip Welder B11 Ø 3.8mm Long Life Replacement Tip Welder B11 Ø 3.8mm features: - Power: 40W- Rod ø 3.80mm- Length 70 mm- Long duration tip- Quantity: 1 unit Code H0012 ✗ Out-of-Stock Price €2.19
60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g 60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.- Fusing temperature 183°C/190°C.- Alloy: Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0002 ✗ Out-of-Stock Price €3.95
Silicone welding mat with departments - AS19 350 x 250 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0214 Last items in stock Price €13.50
Flux Colophony Rosin Core 40g Flux Colophony Rosin Core 40g features:Flux rosin, solid resin, neutral ph for a correct electronic welding.- They do not cause corrosion of non-ferrous metals- Does not cause short circuitsIt melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.Use a toothpick for the application. Do not apply in excess.Security:- Use in ventilated spaces. Do not inhale vapors that are released when welding- Keep the pot tightly closed and out of the reach of children- Do not eat. It is not toxic- Rarely irritating to skin contact Code Q0011 Available Regular price €2.49 -€0.50 Price €1.99
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €9.95