Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF Can be connected with the ESP8266 module with IpexCompatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features: - Frequency range: 0 ~ 6000MHz- Interface: SMA male connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1.13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0024 Available Price €1.95
Relay Module DC 5V 10A 2 Channel Low/High Trigger Relay Module DC 5V 10A 2 Channel Low/High Trigger features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- It has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL002 Available Price €3.15
Relay Module 1 Channel 5V 10A 1 Channel 5V Relay Module. This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). Relay Module 1 Channel 5V 10A features: - Channel: 1 - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - LED indicator - Dimensions: 30x 54mm Code RL005 Available Price €1.29
Easy PETG Filamento 1.75mm 0.85kg White color blanco Premium Bobina para Impresora 3D Code I0444 Backorder Regular price €23.90 -20% Price €19.12
Ultrasonic Cleaning 0.6L CD 2800 Ultrasonic Cleaner The cleaning results every time make this jewelry cleaner, watch shops, or in large cell phone repair shops for commercial or home use Specifications: -Configuration of the timer: 3 minutes automatic timer- Ultrasonic frequency: 40 KHz-Consumption of energy: 50W-Material of the tank: stainless steel-Capacity of the tank: 600 ml-Size of the tank: 155 x 95 x 52 mm (length x width x height)-Size of the unit: 200 x 140 x 125 mm (length x width x height)-Fuel supply: AC 220 ~ 240V, 50 Hz-Fuse network: 3A-The powerful cleaning system works to gently remove dirt, dust and dirt from your valuables, such as jewelry, glasses, etc. Code V0009 Backorder Price €59.90
TDA2030A 1X18W Audio Amplifier TDA2030A 1X18W Audio Amplifier features: - Chip: TDA2030A - Power supply: DC 6V ~ 12V - Channel type: Single channel - Output power: 1 x 18 W - Output output: 4 ~ 8 Ohm - Mono mode - Size (LxWxH): 31.6 x 23.5 mm Code M0063 Available Regular price €3.39 -€1.00 Price €2.39
Mini Submersible Water Pump DC 3V 120L/H Characteristic: - Operating voltage: 3-6V - Max flow: 80-120 l / h - Maximum pumping height: 40-110cm - Continuous working time of 500 hours - Cable length: 20cm - Inside outlet diameter: 5 mm - Outside outlet diameter: 7.5 mm - Dimensions: 45mm x 23mm x 30mm Code M0040 Available Regular price €2.49 -€0.51 Price €1.98
HC-SR501 Motion Detector Module Passive Infrared PIR Sensor Arduino compatible IR motion detector with a detection range of 7 meters and an operating angle of 120º. An electric pyro sensor , which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone. Ideal for projects with ARDUINO, PIC, AVR, STM32. HC-SR501 Motion Detector Module Passive Infrared PIR Sensor features: - Infrared sensor with control circuit - Adjustable sensitivity and time - Operating voltage: 4.5V- 20V - Consumption in Idle state: Code S0003 Available Price €1.79
Long Life Replacement Tip Welder B11 Ø 3.8mm Long Life Replacement Tip Welder B11 Ø 3.8mm features: - Power: 40W- Rod ø 3.80mm- Length 70 mm- Long duration tip- Quantity: 1 unit Code H0012 ✗ Out-of-Stock Price €2.19
Third hand support for cable soldering Third hand stand for easy soldering of wires with a diameter from 1 to 5mm. Number of holes 5. Code MX0001 Last items in stock Regular price €3.79 -€0.90 Price €2.89
Flux Gel RMA 100cm3 Flux gel 100cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases). Code Q0116 ✗ Out-of-Stock Price €19.89
Soldering Tip Cleaning Ball It allows removing the solder residues from the tips.It cleans better and does not cause temperature drops like with sponges.You do not need extra water to clean the tip.Easy and effective cleaning at the tip.Soldering Tip Cleaning Ball features:- Dimensions: diameter 50mm Code H0010 Available Price €1.29
ESD Antistatic Gloves ESD compatible gloves made of polyester with woven conductive fibres. Code H0182 Available Regular price €1.49 -€0.50 Price €0.99
Varnish Flux LT-4 - The product protects PCB plates, allows for easier welding- The product protects the printed circuit boards against oxidation and corrosion during storage.- This allows a faster welding and avoids the "cold welding".- The application method allows easy distribution of the product on the plates.- Can be used during production, repair, maintenance and service.Flux Varnish LT-4 Plate Protector features:- Shape: Spray- Capacity: 100ml- Rosin RMA- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.Application:- PCB protection against oxidation,- Applied in the production of printed circuit boards immediately after engraving, Code Q0070 Available Price €5.95
Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron features: - Power: 48W- Length: 65 mm- Long duration tip- Quantity: 1 unit Code H0145 Available Regular price €1.29 -€0.30 Price €0.99
Flux Colophony Rosin Core 100g Flux Colophony Rosin Core 100g features:Flux rosin, solid resin, neutral ph for correct electronic welding.-Does not cause corrosion of non-ferrous metals-Does not cause short circuits-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics worksUse a toothpick for the application. Do not apply in excess.SECURITY:-Use in ventilated spaces. Do not inhale vapors that are released when welding-Keep the pot tightly closed and out of reach of children-Do not eat. It is not toxic-Rarely irritating to skin contact Code Q0012 Last items in stock Regular price €5.89 -€0.50 Price €5.39
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €9.95
Soldering Iron Tip Cleaner Ball Soldering tip cleaner allows removing the solder residues from the tips.It cleans better and does not cause temperature drops like with sponges.You do not need extra water to clean the tip.Easy and effective cleaning at the tip. Code H0198 ✗ Out-of-Stock Price €2.99
Electronic Antistatic Wrist Bracelet ESD Blue Electronic Antistatic Wrist Bracelet ESD Blue features: - Electronic Antistatic Bracelet, blue color- Protection against electrostatic charges- Adjustable bracelet with crocodile clip connector- Material: The conductive elastic band is made of nylon and woven in stainless steel- Extensible length up to 180 centimeters- Weight: 25 gr.- Quantity: 1 loose unit in plastic bag Code H0142 Available Price €1.85
Kontakt PCB PLUS spray 100ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 100ml features:- Shape: Spray- Capacity: 100mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0072 Last items in stock Price €3.95
Flux Colophony Rosin Core 100g Flux Colophony Rosin Core 100g features:Flux rosin, solid resin, neutral ph for correct electronic welding.-Does not cause corrosion of non-ferrous metals-Does not cause short circuits-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics worksUse a toothpick for the application. Do not apply in excess.SECURITY:-Use in ventilated spaces. Do not inhale vapors that are released when welding-Keep the pot tightly closed and out of reach of children-Do not eat. It is not toxic-Rarely irritating to skin contact Code Q0012 Last items in stock Regular price €5.89 -€0.50 Price €5.39
Long Life Replacement Tip Welder B13 Ø 3.8mm 40W Long Life Replacement Tip Welder B13 Ø 3.8mm 40W features: - Power: 40W- Rod: ø 3.80mm- Length: 70 mm- Long duration tip- Quantity: 1 unit Code H0014 Available Price €2.29
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €3.49
Silicone welding mat with departments - AS11 450 x 300 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0213 ✗ Out-of-Stock Price €23.90
Flux Solder Paste in Tin Can 40g Flux Solder Paste in Tin Can 40g features: - Welding paste according to DIN EN 29454-1 1.1.2.C- Flux paste based on medium activity rosin- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0040 Available Price €2.29
Soldering Iron Holder Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip. Code H0576 Available Price €3.99
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €11.49
Desoldering Wire 3mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 3mm features:- Material: Copper- Length: 1.5m- Width: 3mm Code H0008 Available Price €1.79