Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB. Code Q0094 Available Price €2.89
Thermal tape 20mm type Kapton Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acidic products and alkaline - Solvent resistant - Adhesive - Length Approx: 26m Code I0053 Available Regular price €4.85 -€1.36 Price €3.49
Sodium Persulfate - etching agent for PCB and copper - pack 100g Chemical substance for recording printed circuits and copper. Unlike ferric chloride, sodium persulfate is colorless, odorless, does not stain clothes and does not turn blue when it runs out. Easy to dissolve. It acts very regular with guarantee of contour sharpness. Code Q0053 Available Price €2.85
Desoldering Wire 2.5mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 2.5mm features:- Material: Copper- Length: 1.5m- Width: 2.5mm Code H0007 Available Price €1.79
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
Soldering Wire Tin Sn60Pb40 Lead 1.2% Flux 0.3mm 50g Welding Wire 50g Tin 60/40 Sn/Pb Lead 1.2% Flux 0.30mm features: - 50gr. 0.3mm diameter welding wire. 60% tin and 40% lead - Fusing temperature 183 „ƒ / 190 „ƒ - Alloy Sn60 Pb40 - Flux 1.2% - Quantity: 1 unit Code Q0122 ✗ Out-of-Stock Price €3.49
Soldering Iron Holder Soldering Iron Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Dimensions of base: 84 x 130 mm- Weight: 0.2kg Code H0095 Available Price €3.99
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm Tin ideal for application in consumer electronics circuits.Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm features:- 100gr. 1.2mm diameter welding wire- 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit- High quality - manufactured in EU Code Q0003 ✗ Out-of-Stock Price €8.95
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €9.95
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €25.95
Flux Solder Paste in Tin Can 100g Flux Solder Paste in Tin Can 100g features: - Welding paste according to DIN EN 29454-1 1.1.2.C.- Flux paste based on medium activity rosin.- Easy to solder: copper, silver plated, zinc and nickel. Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0041 Available Price €4.49
Varnish Flux LT-4 - The product protects PCB plates, allows for easier welding- The product protects the printed circuit boards against oxidation and corrosion during storage.- This allows a faster welding and avoids the "cold welding".- The application method allows easy distribution of the product on the plates.- Can be used during production, repair, maintenance and service.Flux Varnish LT-4 Plate Protector features:- Shape: Spray- Capacity: 100ml- Rosin RMA- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.Application:- PCB protection against oxidation,- Applied in the production of printed circuit boards immediately after engraving, Code Q0070 Available Price €5.95
Kontakt PCB PLUS spray 100ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 100ml features:- Shape: Spray- Capacity: 100mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0072 Last items in stock Price €3.95
Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0017 Available Price €5.79
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95
Water-Based Cleaner PCB 1L Aqueous PCB cleanerWater-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.It causes the saponification of the rosin and the dissolution of the flow residues.Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.Does not attack metal and aluminum surfaces.Water-Based Cleaner PCB features:- Type of chemical preparation: aqueous stripper of PCB printed plates- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components- Form: Liquid- Capacity: 1l Code Q0031 ✗ Out-of-Stock Price €5.90
ESD Antistatic Gloves ESD compatible gloves made of polyester with woven conductive fibres. Code H0182 Available Regular price €1.49 -€0.50 Price €0.99
Flux Welding Paste 20g Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C. - Flux paste based on activity rosin medium. - Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints . Operating temperature up to 350 C. Code Q0025 Available Price €1.89
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €25.95
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €3.49
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Last items in stock Price €12.95
Replacement Soldering Long Life Tip C1-3 Ø 3.0mm for 48W Soldering Station Replacement Soldering Long Life Tip C1-3 Ø 3.0mm for 48W Soldering Station features: - Power: 48W- Length: 65 mm- Long duration tip- Quantity: 1 unit Code H0146 Available Regular price €1.29 -€0.30 Price €0.99
Helping Hand Magnifier LED Light with Soldering Stand A set of tools to facilitate soldering and other precision installation and electronic work. The base includes a sponge for cleaning the tip and a robust soldering iron holder. Two 'crocodile' holders and a wide magnifying glass with illumination are also available for use. Code H0570 Last items in stock Price €17.95
Mini Soldering Iron Stand Mini Soldering Iron Stand features: - Mini Holder for tin soldering iron- Dimensions: 65x 40mm Code H0097 Available Price €0.85
Blue cleaning sponge for soldering iron tip Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip features: - Size: 50x35mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0152 Available Price €0.75
3x Long Life Soldering Iron Tips Replacement Ø 3.8mm 3x Long Life Soldering Iron Tips Replacement Ø 3.8mm features: - Power: 40W- Rod ø 3.80 mm- Length 70 mm- Long duration tip Code H0015 ✗ Out-of-Stock Price €2.99
Flux Solder Paste in Tin Can 100g Flux Solder Paste in Tin Can 100g features: - Welding paste according to DIN EN 29454-1 1.1.2.C.- Flux paste based on medium activity rosin.- Easy to solder: copper, silver plated, zinc and nickel. Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0041 Available Price €4.49
Silicone welding mat with departments - AS11 450 x 300 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0213 ✗ Out-of-Stock Price €23.90