Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 16g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:- 16 gr. welding wire of 1 mm diameter. 60% tin, 40% lead- Melting temperature 187/190 C- Alloy Sn60Pb40- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required. - Quantity: 1 unit- High quality - manufactured in EU Code Q0114 ✗ Out-of-Stock Price €1.79
5x Push Switch Button B3F Omron Red Key 12mm 5x Push Switch Button B3F Omron Red Key 12mm features:- 5x Push Buttons B3F Omron Key- Maximum current: 50 mA- Tension DC: 24V- Operating force: 1.27N- Switch terminals: weldable- Contact: SPST-NO- Contact resistance: 100M Ohm- Type of action: Superficial- Measures: 12x12x7.3mm Code K0073 Available Price €0.20
10x Electrolytic Capacitor 470uF 16V 105ºC 10x Electrolytic Capacitor 470uF 16V 105ºC PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 470uF-Maximum tension: 16V-Maximum temperature 105º C-Dimensions: 8x12mm-Quantity: 10 units Code D0047 Available Price €0.13
USB Digital Power Voltmeter Tester Amps Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets ...USB Digital Power Voltmeter Tester Amps features:- Operating range: voltage 3.5 - 9V- Current 0 -3A- Resolution: 10mV 1mA- Error: <± 1.5%- Dimensions: 60 x 23 x 19mm Code K0083 Available Price €5.95
10x Photoresistor GL5539 LDR 50k - 100k Photoresistance is a resistor whose resistance decreases as the intensity of the light that falls on it increases. 10x Photoresistor GL5539 LDR 50k - 100k features:- Model: GL5539- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 100mW- Resistance with light (10lux): 50-100KΩ- Resistance with darkness (0lux): 5MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC Code S0013 Available Price €0.15
Quartz Crystal Oscillator 8 MHz 5x Quartz Crystal Oscillator 8 MHz features:- Low Profile Crystal Oscillator- Type: Quartz Crystal 8 MHz- Frequency: 8 MHz- Format: Low profile- Assembly: Intern Code E0010 Available Price €0.24
3x DC PCB Socket Connector 5.5 x 2.1 3x DC PCB Socket Connector 5.5 x 2.1 features: - Type: DC female jack- Diameter of the pin: 2,1mm- Diameter of the connector: 5.5mm- Quantity: 3 units Code K0021 Available Price €0.36
Thermistor NTC 5.0K 5% MF52A epoxy resin coating resistor NTC thermistor - with a negative temperature coefficient, i.e. an increase in temperature causes a decrease in resistance. Thermistor NTC 5.0K 5% MF52A epoxy resin coating resistor features:Size: 3mmRated resistance: R25 = 5.0kB value 25/85 = 3950°KRated power: ‰¤ 50mWTolerance:± 5%Operating temperature: from -40°C to +125°C Tinned steel wire 25mm Code D0089 Available Price €0.49
Soldering Iron Holder Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip. Code H0576 Available Price €3.99
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
ESD Antistatic Gloves ESD compatible gloves made of polyester with woven conductive fibres. Code H0182 Available Regular price €1.49 -€0.50 Price €0.99
Silicone welding mat with departments - AS11 450 x 300 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0213 ✗ Out-of-Stock Price €23.90
Flux Solder Paste in Tin Can 40g Flux Solder Paste in Tin Can 40g features: - Welding paste according to DIN EN 29454-1 1.1.2.C- Flux paste based on medium activity rosin- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0040 Available Price €2.29
Flux Gel 10ml Based on RMA Colophony Flux Gel 10ml Based on RMA Colophony features: - Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive- Shape: gel- Capacity: 10ml- Plastic Packaging- SMT mounting time up to 36 hours- Retains stickiness at 72 hours- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding- Keep out of reach of children- Use in ventilated spaces- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water Code Q0047 Available Price €6.75
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95
Mini Holder Soldering Iron Stand Mini Holder Soldering Iron Stand features: - Dimensions: 65x 42mm Code H0009 Available Price €1.29
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €25.95
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Last items in stock Price €12.95
ESD Antistatic Gloves ESD compatible gloves made of polyester with woven conductive fibres. Code H0182 Available Regular price €1.49 -€0.50 Price €0.99
Soldering Aid Kit Welding Tools Soldering Aid Kit Welding Tools features: - Variety of applications for precision work- To meet the requirements of welding operation of the press, cutting, scraping, hooks brushes etc- Content: 1x Welding aid knife 1x Welding Fork Assistance 1x Welding assistance scraper 1x Hook assistant chip retention 1x Welding brush for assistance 1x Spatula Code H0096 Available Price €4.49
Mini Soldering Iron Stand Mini Soldering Iron Stand features: - Mini Holder for tin soldering iron- Dimensions: 65x 40mm Code H0097 Available Price €0.85
Flux Colophony Rosin Core 40g Flux Colophony Rosin Core 40g features:Flux rosin, solid resin, neutral ph for a correct electronic welding.- They do not cause corrosion of non-ferrous metals- Does not cause short circuitsIt melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.Use a toothpick for the application. Do not apply in excess.Security:- Use in ventilated spaces. Do not inhale vapors that are released when welding- Keep the pot tightly closed and out of the reach of children- Do not eat. It is not toxic- Rarely irritating to skin contact Code Q0011 Available Regular price €2.49 -€0.50 Price €1.99
Flux Solder Paste in Tin Can 40g Flux Solder Paste in Tin Can 40g features: - Welding paste according to DIN EN 29454-1 1.1.2.C- Flux paste based on medium activity rosin- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0040 Available Price €2.29
Long Life Replacement Tip Welder B13 Ø 3.8mm 40W Long Life Replacement Tip Welder B13 Ø 3.8mm 40W features: - Power: 40W- Rod: ø 3.80mm- Length: 70 mm- Long duration tip- Quantity: 1 unit Code H0014 Available Price €2.29
60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g 60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.- Fusing temperature 183°C/190°C.- Alloy: Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0002 ✗ Out-of-Stock Price €3.95
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €25.95
Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0017 Available Price €5.79
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Last items in stock Price €12.95