10x Ceramic Capacitor 1uF 50v 102 PCB PIC for Arduino 10x Ceramic Capacitor 1uF 50v 102 PCB PIC Arduino features:-Type: ceramic Y5P-Tolerance: +/-10%-Dimensions: diameter 6mm, pitch 5.08mm Code D0035 Available Price €0.10
Laminated Copper Clad Prototype PCB Circuit Board kit pack 10 pcs. A set of boards of different sizes, single or double-sided, ideal for testing or manufacturing printed circuit boards. The set contains about 10 boards of different sizes (e.g. 8x12 cm, 8x20 cm, 10x15 cm, 12x20 cm and others) and a total weight of about 0.5 kg. Code PB051 Available Price €6.99
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
10x Female-Female Cables 20cm Jumpers Dupont 2,54 10x Female-Female Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have female header contacts at either end -Compatible with male connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0005 Available Price €1.69
USB Digital Power Voltmeter Tester Amps Device to measure the power consumption of any device powered by USB: phones, chargers, USB disks, consoles, tablets ...USB Digital Power Voltmeter Tester Amps features:- Operating range: voltage 3.5 - 9V- Current 0 -3A- Resolution: 10mV 1mA- Error: <± 1.5%- Dimensions: 60 x 23 x 19mm Code K0083 Available Price €5.95
Replacement Soldering Long Life Tip C1-3 Ø 3.0mm for 48W Soldering Station Replacement Soldering Long Life Tip C1-3 Ø 3.0mm for 48W Soldering Station features: - Power: 48W- Length: 65 mm- Long duration tip- Quantity: 1 unit Code H0146 Available Regular price €1.29 -€0.30 Price €0.99
W1209 12V DC Thermostat Digital Temperature Controller Switch W1209 12V DC Thermostat Digital Temperature Controller Switch features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50 -110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measurement accuracy: 0.1 ° C - Refresh rate: 0.5 s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Power of output: 10A relay - Sensor probe: NTC waterproof sensor (10K 0.5%) - Environmental requirements: -10 ~ 60 ° C Humidity 20% -85% - Dimensions: 48 x 40 mm Code M0102 Available Price €3.79
Nano V3.0 Terminal Block Adapter Nano V3.0 Terminal Block Adapter features: - Nano V3.0 Atmega328P adapter with soldered connectors - PCB dimensions: 53mm x 35mm Code B0024 Available Price €4.49
Magnifying LED Lamp Lens 4 Inch Magnifying LED Lamp Lens 4 Inch features: - Diopter: 3D + 12D- Lens size: 4 inch- Lens material: glass- Light source: 15pcs LED- Standard mount: table base Code H0144 Available Regular price €30.00 -15% Price €25.50
Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron features: - Power: 48W- Length: 65 mm- Long duration tip- Quantity: 1 unit Code H0145 Available Regular price €1.29 -€0.30 Price €0.99
Desoldering Wire 3mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 3mm features:- Material: Copper- Length: 1.5m- Width: 3mm Code H0008 Available Price €1.79
Vacuum Pump Components SMD Suction Cup Suction Vacuum Pump Components SMD Suction Cup Suction features: - An economical option for suction for handling SMD components- Includes 3 suckers of different sizes Code H0118 Available Price €2.73
ESD Antistatic Gloves ESD compatible gloves made of polyester with woven conductive fibres. Code H0182 Available Regular price €1.49 -€0.50 Price €0.99
Flux Gel Jeringa 1.4cm3 RMA Soldering BGA SMD SMT Flux gel syringe 1.4cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases). Code Q0018 Available Price €2.49
Flux Solid Resin Rosin 20g Flux rosin, solid resin, neutral pH for correct electronic soldering - They do not cause corrosion of non-ferrous metals - Does not cause short circuits Melts with temperature, spreads over the area to be welded and penetrates into the most difficult corners cleans and prepares the surfaces and components to be welded, and facilitates adhesion and tin fluidity, improving soldering in electronics jobs. Use a toothpick for the application. Do not apply excessively. Safety: - Use in ventilated spaces. Do not inhale the fumes that are given off by welding. - Keep the bottle tightly closed and out of the reach of children. - Do not ingest. Non-toxic - Rarely irritating to skin contact Code Q0010 Available Price €1.69
Liquid Flux Alcohol Base TK83 100ml Liquid Flux Alcohol Base TK83 100ml Flux liquid alcohol based for electronic welding. Type of flux: rosinNo Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC. Code Q0017 Available Price €5.79
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
Long Life Replacement Tip Welder B12 Ø 3.8mm 40W Long Life Replacement Tip Welder B12 Ø 3.8mm 40W features: - Power: 40W- Rod: ø 3.80mm- Length: 70 mm- Long duration tip- Quantity: 1 unit Code H0013 Available Price €2.29
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95
Antistatic Desoldering Pump Nozzle Antistatic Desoldering Pump Nozzle features: - Manual desoldering suction- Replacement nozzle for manual tin vacuum cleaner- Quantity: 1 unit Code H0024 Available Price €0.79
Replacement Soldering Long Life Tip C1-3 Ø 3.0mm for 48W Soldering Station Replacement Soldering Long Life Tip C1-3 Ø 3.0mm for 48W Soldering Station features: - Power: 48W- Length: 65 mm- Long duration tip- Quantity: 1 unit Code H0146 Available Regular price €1.29 -€0.30 Price €0.99
ESD Antistatic Gloves ESD compatible gloves made of polyester with woven conductive fibres. Code H0182 Available Regular price €1.49 -€0.50 Price €0.99
3x Long Life Soldering Iron Tips Replacement Ø 3.8mm 3x Long Life Soldering Iron Tips Replacement Ø 3.8mm features: - Power: 40W- Rod ø 3.80 mm- Length 70 mm- Long duration tip Code H0015 ✗ Out-of-Stock Price €2.99
Long Life Replacement Tip Welder B13 Ø 3.8mm 40W Long Life Replacement Tip Welder B13 Ø 3.8mm 40W features: - Power: 40W- Rod: ø 3.80mm- Length: 70 mm- Long duration tip- Quantity: 1 unit Code H0014 Available Price €2.29
Flux Gel RMA 100cm3 Flux gel 100cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases). Code Q0116 ✗ Out-of-Stock Price €19.89
Soldering Iron Holder Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip. Code H0576 Available Price €3.99
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €3.49