Ceramic Capacitor 10nF 50v 103 Ceramic Capacitor 10nF 50v 103 PCB PIC Arduino 0.01uF features: Orders only in multiples of 20 units-Type: Ceramic Y5V-Tolerance: +/-20%-Dimensions: diameter 6mm, pitch 5.08mm Code D0053 Available Price €0.06
BNC Probe Male Double Crocodile Plug This product is a BNC probe with double black and red crocodile plug to perform your oscilloscope tests.Its internal resistance is 75 ohm and it has a length of one meter. BNC Probe Male Double Crocodile Plug features: - 100% new and high quality- New BNC to double crocodile clip oscilloscope probe- Standard BNC ends can be used for all oscilloscopes- Length: 100 cm- Coaxial cable 3c-2v 75 ohm- Includes 11 crocodile cable Code K0117 Available Price €3.49
Soldering Iron Stand Holder Soldering Iron Stand Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Base dimensions: 78 x 110 mm- Weight 0.4kg Code H0016 Available Price €6.95
Arduino compatible Nano V3.0 CH340 board Version compatible with Arduino Nano V3.0 It has an ATMega328P chip running at 16Mhz with bootloader loaded factory. Characteristic: - Microcontroller: ATmega328 - Operating Voltage (logic level): 5V - Input Voltage (recommended): 7-12V - Digital I / O Pins: 14 (6 PWM outputs) - Analog Inputs: 8 (A0-A7) - DC Current per I / O pin 40 mA - Flash memory: 32 KB (2 KB used by the bootloader) - SRAM: 2 KB - EEPROM: 1 KB - Frequency Clock: 16 MHz - USB Communication - CH340 - Dimensions: 18 mm x 44 mm Code B0006 Available Price €5.50
10m Rigid cable, 22AWG yellow PVC wire, 0.35mm2 Characteristic: -Conductor: solid wire, tinned copper -Insulation: PVC -Low voltage electrical cables - Nominal voltage 300V / 80C -Standard: UL 1007 -Number of conductors: 22AWG, 1x0.35mm2 -Outer diameter: 1.6mm Code K0226 Available Price €3.89
Flux Solid Resin Rosin 20g Flux rosin, solid resin, neutral pH for correct electronic soldering - They do not cause corrosion of non-ferrous metals - Does not cause short circuits Melts with temperature, spreads over the area to be welded and penetrates into the most difficult corners cleans and prepares the surfaces and components to be welded, and facilitates adhesion and tin fluidity, improving soldering in electronics jobs. Use a toothpick for the application. Do not apply excessively. Safety: - Use in ventilated spaces. Do not inhale the fumes that are given off by welding. - Keep the bottle tightly closed and out of the reach of children. - Do not ingest. Non-toxic - Rarely irritating to skin contact Code Q0010 Available Price €1.69
Potentiometer Cleaner - Spray 60ml Potentiometer Cleaner - Spray 60ml features: A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them. Code Q0030 Available Price €2.95
TP4056 Module Lithium Battery Charger with Protection Micro USB TP4056 Module Lithium Battery Charger with Protection features: - TP4056 Li-Ion Micro USB Charger - Upgraded version of previous TP4056 - Micro USB connection to charge directly from the PC - Ideal for 18650 batteries - Based on the TC4056A regulator - Input Voltage: 4.5V - 5.5V DC - Full charge voltage: 4.2V +/- 1.5% - Max Output Current: 1A - Overvoltage protection 4.2V - Over discharge protection 2.4V - LED indicator: charging blue, charging red - Operating temperature: -10ºC to + 85ºC - IN + and IN- connection for electronic circuits - Overcurrent protection: 3A - Measurements 26 x 19 x 5 mm - Possibility of current change through Rprog Code A0026 Available Price €1.69
Aluminum Desoldering Pump Tin Antistatic Suction Desoldering iron for the removal of excess tin. You can quickly and effectively remove solder from a plate or circuit.Replaceable antistatic nozzle.Manufactured in Aluminum.Aluminum Desoldering Pump Tin Antistatic Suction features:- Length: 190mm- Desoldering pump- High suction power- Replaceable long-life silicone tip- Light weight- Easy use with one hand, light and resistant- Vacuum Solder Aluminum Desoldering Pump Solder Remover Pump Tool- A good quality product for fast and efficient removal of excess solder, ideal for PCB repair- High-capacity spring-loaded plunger quickly eliminates welding in one action. The Pumping tool easily- Disassemble for a quick clean Code H0001 Available Price €2.95
Silicone welding mat with departments - AS11 450 x 300 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0213 ✗ Out-of-Stock Price €23.90
Flux Gel 10ml Based on RMA Colophony Flux Gel 10ml Based on RMA Colophony features: - Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive- Shape: gel- Capacity: 10ml- Plastic Packaging- SMT mounting time up to 36 hours- Retains stickiness at 72 hours- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding- Keep out of reach of children- Use in ventilated spaces- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water Code Q0047 Available Price €6.75
Long Life Replacement Tip Welder B11 Ø 3.8mm Long Life Replacement Tip Welder B11 Ø 3.8mm features: - Power: 40W- Rod ø 3.80mm- Length 70 mm- Long duration tip- Quantity: 1 unit Code H0012 ✗ Out-of-Stock Price €2.19
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Last items in stock Price €12.95
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
Soldering Iron Holder Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip. Code H0576 Available Price €3.99
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €9.95
Soldering Iron Holder Soldering Iron Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Dimensions of base: 84 x 130 mm- Weight: 0.2kg Code H0095 Available Price €3.99
Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron features: - Power: 48W- Length: 65 mm- Long duration tip- Quantity: 1 unit Code H0145 Available Regular price €1.29 -€0.30 Price €0.99
Aluminum Desoldering Pump Tin Antistatic Suction Desoldering iron for the removal of excess tin. You can quickly and effectively remove solder from a plate or circuit.Replaceable antistatic nozzle.Manufactured in Aluminum.Aluminum Desoldering Pump Tin Antistatic Suction features:- Length: 190mm- Desoldering pump- High suction power- Replaceable long-life silicone tip- Light weight- Easy use with one hand, light and resistant- Vacuum Solder Aluminum Desoldering Pump Solder Remover Pump Tool- A good quality product for fast and efficient removal of excess solder, ideal for PCB repair- High-capacity spring-loaded plunger quickly eliminates welding in one action. The Pumping tool easily- Disassemble for a quick clean Code H0001 Available Price €2.95
Silicone welding mat with departments - AS11 450 x 300 mm This multifunctional silicone mat with departments is ideal for your DIY, welding, electronics and DIY work. Maintain order easily thanks to its various compartments. Code H0213 ✗ Out-of-Stock Price €23.90
Flux Gel 10ml Based on RMA Colophony Flux Gel 10ml Based on RMA Colophony features: - Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive- Shape: gel- Capacity: 10ml- Plastic Packaging- SMT mounting time up to 36 hours- Retains stickiness at 72 hours- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding- Keep out of reach of children- Use in ventilated spaces- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water Code Q0047 Available Price €6.75
Long Life Replacement Tip Welder B11 Ø 3.8mm Long Life Replacement Tip Welder B11 Ø 3.8mm features: - Power: 40W- Rod ø 3.80mm- Length 70 mm- Long duration tip- Quantity: 1 unit Code H0012 ✗ Out-of-Stock Price €2.19
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Last items in stock Price €12.95
Liquid Flux for Alcohol-Based Rosin Welding 15ml Liquid Flux for Alcohol-Based Rosin Welding 15ml features: - Flux liquid alcohol-based for electronic welding- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive- Liquid form- Capacity: 15ml- Content of solid bodies 0 ... 5%- Viscosity (temp. 25 ° C) 794Mg / cm3- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components- Cleans easily with alcohol- Can be used with any tin Code Q0020 Available Price €1.95
Soldering Iron Holder Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip. Code H0576 Available Price €3.99
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €9.95
Soldering Iron Holder Soldering Iron Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Dimensions of base: 84 x 130 mm- Weight: 0.2kg Code H0095 Available Price €3.99
Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron features: - Power: 48W- Length: 65 mm- Long duration tip- Quantity: 1 unit Code H0145 Available Regular price €1.29 -€0.30 Price €0.99