SIM800L GPRS GSM SIM Board Quadband SIM800L GPRS GSM SIM Board Quadband features: Package includes: - SIM800L module, - 2x pin headers, - Spring antenna, - 3G PCB antenna - 15cm cable. - Supported SIM format: Micro SIM. Code W0017 Available Price €6.49
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.79 -€1.00 Price €1.79
Tower Pro Micro Servo 9G SG90 pack 10pcs Pack 10pcs of micro servo 9g SG90. Code R0014 ✗ Out-of-Stock Price €24.95
1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino 1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL001 Available Price €2.39
ATmega2560 R3 REV3 16U2 Mega2560 module with USB cable It has an Atmega2560 chip running at 16Mhz with a factory loaded bootloader with 54 digital input / output pins (from which 14 can be used as PWM outputs) and 16 analog inputs, 4 UART (hardware serial ports). The board includes a USB connector, an ICSP port, a reset button and some status LEDs. Atmega16U2 programmed as a USB-to-serial converter. Simply connect it to a computer with a USB cable or power with a power adapter and DC connector. Code B0003 Available Price €24.90
TCRT5000 Module 3.5cm IR infrared sensor The optical (reflective) module sensor with LM393 comparator, which detects obstacles with high accuracy. The ideal detector for obstacle detection for the installation of intelligent robots.TCRT5000: reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of an object using infrared reflection on the object. The transmitter is an infrared LED and the receiver is a phototransistor. The sensor allows the detection of an object at a distance of up to 3.5 cm from the white paper and 1 cm from the person's finger. Code S0138 Available Price €1.69
Protoboard Breadboard 400 points for Arduino It can be used to work with AVR, ARM, PIC microcontrollers, Arduino modules and to work with self-designed prototypes. Arduino Protoboard Breadboard 400 points features: -400 Connections -Linkable with other Plates -Base with adhesive to attach it to the work surface -Measures 82x55x8 mm Code PB002 Available Price €1.90
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
Motor Nema 17 4.28kg 17HS4401 It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 4.28 kg/cm. It comes with a 1m cable. We have the best stepper motors at the best prices! Code I0020 Available Regular price €11.50 -€1.55 Price €9.95
Slip ring 22mm diameter 6 wires A slip ring capable of holding up to 6 wires of 22mm diameter. Code R0093 Last items in stock Price €29.50
Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features: - 25T Servo Arm for Futaba, Tower Pro and High Power Servos - Material: Aluminum - Color: red - Size: 35.5 x 15 x 6mm - Weight: 4 grams - M3 thread for joints of cars or helicopters. - Hole distance 20 and 24 mm from the servo outlet. - Quantity: 1 unit Code R0040 Available Price €1.59
Servo with Rotation 180 Servo Motor Type S3003 Servo with Rotation 180 Servo Motor Type S3003 features: - Model Aircraft Futaba Arduino Robotics - Operating Voltage: 4.8V to 6V - Max Torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V) - Max radius: 180º - Temperature range: -20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese manufacturing Code R0018 Available Regular price €6.29 -€0.30 Price €5.99
Motor Nema17 JK42HS34-0404 It is one of the most popular stepper motors with 200 steps per revolution and a maximum load of 2.6 kg/cm (0.25 Nm). It is supplied with a voltage of 12.0 V, consumes a current of 400 mA per coil. Dimensions: 42 x 42 x 34 mm (NEMA 17). Comes with a 30 cm cable. We have the best stepper motors at the best prices! Code I1105 Available Price €14.90
Micro Servo Compatible with MG90S Micro Servo Compatible with MG90S features: - Operating voltage: 4.8Vdc (5V) or 6Vdc - Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V - Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V - Gear type: metallic - Turning width: 180º - Temperature working: from -30 to 60 ºC - 3 plastic propellers / arms - Fixing screws - Size: 22.6 x 11.8 x 31 mm - Weight: 13.4 gr Code R0015 Available Price €3.99
Dupont female-female connector cable to PH2.00 for Nema motor Dupont female-female connector cable to PH2.00 for Nema engine features: Dupont 2.54 female to PH2.00 female connecting cable for Nema motor Length 100cm Code I0177 Available Price €1.95
Gear Reducer Motor 6V DC 200RPM for Smart Car Gear Reducer Motor 6V DC 200RPM for Smart Car features: - Voltage: 3 to 6V DC- Speed without load: 200 RPM to 6V DC Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles - Wiring of the 6V DC 200 RPM motor with the L298N double bridge H controller module Code R0045 Available Price €2.39
5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat The 28BYJ-48 has everything you need to start using stepper motors in your projectA stepper motor converts digital impulses into small steps of movement in one direction The engine also comes with a ULN2003 engine controller cardCan control two DC motors or a bipolar stepper motor with a maximum amperage of up to 500 mAEquipped with state indicator LEDs A, B, C, D 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat features: - Engine model: 28BYJ-48- Phases engine: 4- Operating voltage: 5V- Frequency: 100 Hz- Operating current: 200mA- Max Power: 20W- Winding resistance: 70 ohm- Angle per step: 5,625º- Steps per round: 64- Torque: 0.3 Kgr / cm- Speed: 1900 rpm Code R0038 Available Price €2.95
Free metal wheel 360° with plastic support for robotics Free metal wheel with white plastic support.It allows a 360 ° rotation, wheel silently and without problems. Free metal wheel 360° with plastic support for robotics features: - Main material: Polypropylene (PP), Steel.- Main color: White, silver tone. - Dimensions of support: 50x24mm. - Ball diameter: 15.80mm. Code H0149 Available Price €1.39
Micro Motor 3V 5V 6V DC with cable conector male For Arduino, Smart Car, Robotics.Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC with cable conector male features: - Operating voltage: 1.5V to 6V - Cable 16cm with male connector - DC current: 350mA - Torque max.: 15g / cm- Max speed: 12000rpm- Weight: 16.5 g Code R0080 Available Regular price €1.95 -€0.26 Price €1.69
Heat Sink Aluminium Nema 17 Heat Sink Aluminium Nema 17 features: - MK8 Extruder Radiator Heatsink Printer - Ideal for NEMA17 motors and MK7 and MK8 extruders - Dimensions 40 x 40x 11mm Code I0038 Available Price €1.79
Green Propeller + Micro Motor 3V 5 6V DC DIY for Arduino Small 3V-6V DC motor ideal for DIY projects Code R0032 Available Price €1.77
Gear Reducer Motor 5V DC 1:48 Robot Support for Arduino Smart Car Gear Reducer Motor 5V DC 148 Robot Support Arduino Smart Car features: - Voltage: 3 to 6Vdc - Speed without load: 100 RPM to 6Vdc - No-load current: 90mA to 3Vdc - 180mA to 6Vdc - Reduction: 1:48 - Content: * 1 unit - direct current motor * 1 unit - support with screws Code R0041 Available Regular price €2.85 -5% Price €2.71
Geared Motor with Encoder 6V 1:120 for Arduino Smart Car Robot Geared Motor with Encoder 6V 1120 Arduino Smart Car Robot features:- Voltage: 3 to 6Vdc- Speed without load: 200 RPM to 6Vdc- No-load current: 110mA at 3Vdc - 250mA at 6Vdc- Reductive: 1: 120 Code R0043 Available Price €3.45
Wheels 30mm PP 360° Rotation for Cylindrical Use White plastic wheel with silver tone metal support.It allows a 360° rotation, provides a good resistance to rolling, wheel silently and without problems. Wheels 30mm PP 360° Rotation for Cylindrical Use features: - Main material: Polypropylene (PP), steel- Main color: White, silver tone- Total size: Total height: 45mm / 1.8 "- Wheel size: 30 x 13mm / 1.2 "x 0.5" (P * A)- Hole diameter for mounting: 4mm / 0.16 "- Space between holes: 28 x 22mm / 1.1 "x 0.9" (L * P)- Size of the top plate: 38 x 32mm / 1.5 "x 1.3" (L * P) Code H0128 Available Price €1.69
Motor Nema 23 28.5kg JK57HS112-4204 It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 28.5 kg/cm. Comes with a 50 cm cable. We have the best stepper motors at the best prices! Perfect for CNC machines! Code I0168 Available Regular price €67.90 -€5.00 Price €62.90
Mounting Bracket for Nema Engine 17 42mm Mounting Bracket for Nema Engine 17 42mm features: - Steel bracket for PAP Nema 17 3D printer motor - Mounting bracket of 42mm L shape alloy steel for The NEMA17 3D Stepper Motor Printer - Material: Alloy Steel - Size: 5 x 5 x 5cm - Black Color - Fit for 42mm Stepper Motor as NEMA17 Code I0044 Available Price €3.75
Red Propeller + Micro Motor 3V 5 6V DC DIY for Arduino Small 3V-6V DC motor ideal for DIY projects Code R0033 Available Price €1.77