NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz features: - The NRF24L01 + module is powered with 3.3V- This adapter module includes a 3.3V voltage regulator- You can connect the NRF24L01 module on it at 5V voltage- Dimensions of PCB: 25x 18mm- Quantity: Adapter 1 unit Code W0023 Last items in stock Price €1.49
TCRT5000 Module 3.5cm IR infrared sensor The optical (reflective) module sensor with LM393 comparator, which detects obstacles with high accuracy. The ideal detector for obstacle detection for the installation of intelligent robots.TCRT5000: reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of an object using infrared reflection on the object. The transmitter is an infrared LED and the receiver is a phototransistor. The sensor allows the detection of an object at a distance of up to 3.5 cm from the white paper and 1 cm from the person's finger. Code S0138 Available Price €1.69
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car Ideal for projects with ARDUINO, Smart CarDetects transparent and translucent obstaclesE18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:- Current consumption: up to 100 mA- Supply voltage 5V- Current consumption <25mA- Response time of 2 ms- Measured distance: 3-80cm 15st angle- Screw to adjust the sensitivity, the back- Output status led indicator- Operating temperature: -25°C - + 55°C- Material: high-strength plastic- Type of output: normally open, NPN- Dimensions: 18 mm in diameter, Length 45 mm- Cable length 55cm- Departures: - Brown: + - Blue: - - Black: OUT Code S0004 Available Price €6.95
Resistor 2,2K Ohm 5% 0,25W 1/4W Resistor 2,2K Ohm 5% 0,25W 1/4W features:-2.2K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0015 Available Price €0.08
15x Strip 2 Short Female Pins 15x Strip 2 Short Female Pins features: - Pin spacing: 2.54mm - Insert position: Vertical - Insert: Pasante - Quantity: 15 units of strips of 2 female pins each Code K0147 Available Price €0.14
UNO Board CH340 micro USB clone - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields Characteristic: - Includes USB Cable- ATmega328P 16MHz chip with external quartz crystal- Microprocessor: ATMega328P- Operating voltage: 5V- Input voltage (recommended): 7-12V- Input voltage (limits): 6-20V- Clock speed: 16 MHz- Digital I / O pins: 14 (6 with PWM)- Analog input pins: 6- DC current for Pin I / O: 20 mA- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P- SRAM 2 KB - AtMega328P- EEPROM 1 KB - AtMega328P- Communication: micro USB female Type B Code B0053 Available Price €9.59
Shaft Coupling Motor Connector 5mm 5mm CNC Shaft Coupling Motor Connector 5mm 5mm CNC features:- Fixed coupler in high quality aluminum- They incorporate 4 captive screws so you can perfectly fix the couplings to the rod- Fixed couplers are used to connect the motors step by step, servo AC DC to the spindle- Widely used to build CNC router, CNC Plasma, CNC Mill, CNC Laser, many automation machines and on occasion of mechanical transmission- Material: Aluminum Alloy- Coupler height (L): 25 mm- Outside diameter: 14mm- Shaft diameter: 5mm / 5mm- Screws Position: 4mm- Flexible Shaft Couplers 5mm*5mm Code I0136 Available Regular price €1.99 -€0.50 Price €1.49
SONOFF ZBBridge - Smart Zigbee Bridge - Obsolete The SONOFF ZigBee Bridge is the heart of the smart home that allows you to remotely manage a variety of ZigBee devices and sensors to monitor and control the home. Interact with all your Sonoff devices, both WiFi and ZigBee, thanks to this bridge. Code WS030
Servo Driver for micro:bit, 16-Channel, 12-bit The micro:bit servo driver module, 16 channel, 12 bit, I2C interface. Have you ever had the problem of not having enough micro:bit PWM outputs when trying to create a robotic arm or other robot that requires multiple servos? At times like this a great solution comes to your aid. This servo controller will be the perfect choice. Code WV007 Available Price €21.95
Servo Extension Lead Wire Cable 200mm JR Futaba Servo Extension Lead Wire Cable 200mm JR Futaba features:- Cable length: 200mm Code R0073 Available Price €1.49
Slip ring 22mm diameter 6 wires A slip ring capable of holding up to 6 wires of 22mm diameter. Code R0093 Last items in stock Price €29.50
Micro Digital Servo Right Symmetry 1.5g 4.8V This right symmetry micro digital servo is of excellent quality and very light weight. Its high speed and rotational capacity is great advantage to develop sensitive projects with quick response. Characteristic: - Symmetry of the servo: for incorporation to the right - Plug: 1- red wire: positive polarity (+) 2- black wire: negative polarity (-) 3- white wire: control signal - Model: GS-1502 - Type: Analog Servo - Rotation angle: 180 ° - Torque: - 0.20kg / cm if Vin = 4.8V - 0.24kg / cm if Vin = 6V - Speed: - 0.11sec if Vin = 4.8V - 0.09sec if Vin = 6V - Operating voltage: 3.7V-5V - Material type: Nylon - PCB size: 21x15x12 mm Code F0002 Available Price €8.49
Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features: - 25T Servo Arm for Futaba, Tower Pro and High Power Servos - Material: Aluminum - Color: red - Size: 35.5 x 15 x 6mm - Weight: 4 grams - M3 thread for joints of cars or helicopters. - Hole distance 20 and 24 mm from the servo outlet. - Quantity: 1 unit Code R0040 Available Price €1.59
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.69 -€0.20 Price €2.49
Servo with Rotation 180 Servo Motor Type S3003 Servo with Rotation 180 Servo Motor Type S3003 features: - Model Aircraft Futaba Arduino Robotics - Operating Voltage: 4.8V to 6V - Max Torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V) - Max radius: 180º - Temperature range: -20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese manufacturing Code R0018 Available Regular price €6.29 -€0.30 Price €5.99
Servo Motor Type S3003 Aeromodelling Servo Motor Type S3003 Aeromodelling features: - Operating voltage: 4.8 V to 6 V - Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V) - Max radius: 180 ° (90º in each direction) - Temperature range: - 20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese Manufacture Code R0017 Available Price €6.29
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.79 -€1.00 Price €1.79
Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV Tilt Camera Platform Anti-Vibration Camera Mount for Aircraft FPV features:- Platform for Arduino Robotics Modeling, works with servo 9g SG90- Servos not included Code R0022 Available Regular price €2.15 -€0.20 Price €1.95
Micro Servo Compatible with MG90S Micro Servo Compatible with MG90S features: - Operating voltage: 4.8Vdc (5V) or 6Vdc - Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V - Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V - Gear type: metallic - Turning width: 180º - Temperature working: from -30 to 60 ºC - 3 plastic propellers / arms - Fixing screws - Size: 22.6 x 11.8 x 31 mm - Weight: 13.4 gr Code R0015 Available Price €3.99
25T metal disc for MG996R servomotors + 4 screws Metal disc diameter 25mm with 4 mounting holes for 25T RC MG996R servos 25T metal disc for MG996R servomotors + 4 screws features: - Material: Aluminum - Gear teeth: 25T - 4x M3 mounting holes rotated - Diameter disc: 25mm - Includes: 4 fixing screws. Code R0076 Available Price €0.90
Slip ring mini 12mm diameter 12 wires A sliding ring capable of holding up to 12 wires of 12mm diameter. Code R0092 Backorder Price €33.95
Servo Extension Lead Wire Cable 200mm JR Futaba Servo Extension Lead Wire Cable 200mm JR Futaba features:- Cable length: 200mm Code R0073 Available Price €1.49
LSC-16 Digital Servo Motor Controller 16 channels LSC-16 Digital Servo Motor Controller 16 channels features: - With current limiting protection. The servo output is isolated from the CPU to prevent increased servo current causing damage to the CPU. - CPU using high performance STM32 single chip microcomputer with ARM Cortex-M3 corer, control High precision 16-channel servo movement, adjustable speed. - 16M high capacity memory, enough for your use! It can contain 230 action groups! Each action group can hold up to 510 actions! - Supports online debugging, no need to install any driver by yourself (Install Drivers Automatically). - 0 ~ 3rd and 12th - 15th servo interface have over current protection! Greatly reducing the risk of burned servo due to locked rotor. Code R0046 Available Regular price €25.80 -€2.00 Price €23.80
Servo Extension Lead Wire Cable 300mm JR Futaba Servo Extension Lead Wire Cable 300mm JR Futaba features:- Cable length: 300mm Code R0023 ✗ Out-of-Stock Price €1.75
Slip ring 22mm diameter 6 wires A slip ring capable of holding up to 6 wires of 22mm diameter. Code R0093 Last items in stock Price €29.50
PCA9685 digital servo motor controller 16 channel PWM This module can handle 16 PWM signals, through an I2C connection with devices like microcontrollers or development boards like Arduinos. It can also be concatenated with other equal modules (up to 62 cards), increasing versatility and allowing you to obtain up to 992 PWM outputs that can be used to connect servo motors or LEDs to change the brightness intensity. PCA9685 digital servo motor controller 16 channel PWM features: - Supply voltage: 3-5 VDC, - Maximum motor voltage: 6 VDC, - Number of channels: 16, - Resolution per channel: 12 bits, - Interface: I2C, - Working frequencies: 40-1000 Hz, - PCB size: 62.3x25.3mm . Code R0074 Available Price €5.10
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.79 -€1.00 Price €1.79
Servo Motor Type S3003 Aeromodelling Servo Motor Type S3003 Aeromodelling features: - Operating voltage: 4.8 V to 6 V - Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V) - Max radius: 180 ° (90º in each direction) - Temperature range: - 20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese Manufacture Code R0017 Available Price €6.29