Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ 8-channel oscilloscope for vehicle testing. More than 80 kinds of automotive diagnostic functions (ignition detection / sensor / bus detection / performance / starting and charging circuits , etc.). The video help function provides the diagnostic video help that can be viewed online. The diagnostic result can be generated a diagnostic report, printed or taken a screenshot by pressing a key, many methods to save the data. Supported for recording waveform for a long time. You can simulate the camshaft and crankshaft signal. Transmit signals through the USB 2.0 plug and play interface, and requires no additional power supply; Key Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ features: Code K0234 Available Price €117.90
Hantek Oscilloscope 6022BE USB 2 channel 20MHz Hantek Oscilloscope 6022BE USB 2 channel 20MHz features: - 20 MHz bandwidth - High performance: 48MSa / s sampling in real time - 23 measurement functions - The ability to perform mathematical operations: - Addition - add CH1 + CH1 - Subtraction - subtract CH1-CH2 or CH2-CH-1 - Multiplication - multiplication CH1 * CH2 - Division - division CH1: CH2 or CH2: CH1 - FFT analysis spectral analysis using a fast Fourier transform - The ability to save runs in the following formats: text files, jpg / bmp graphics files, Excel / MS Word files, CSV - Compatible with LabVIEW -USB 2.0 communication interface - powered from the USB port - Operating System: Windows8, Windows 7, Windows NT, Windows 2000, Windows XP, VISTA Code K0048 Last items in stock Price €72.59
Hantek Oscilloscope 6022BL USB 2 channel 20MHz Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s. Hantek Oscilloscope 6022BL USB 2 channel 20MHz features: 16-channel logic analyzer, 20MHz bandwidth. Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions. Intensity, inversion, addition, subtraction, multiplication, division, XY. Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function. One computer can connect to many DSOs, the channel can be easily extended. Specifications: Inputs: 2 channels. Bandwidth: 20 MHz. Code K0049 Last items in stock Price €98.90
Hantek 20:1 attenuator - suitable for passive signal attenuation of a 1008C HT201 20:1 oscilloscope 300V Max This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V) Code H0211 Available Price €10.99
HanteK PP-150 / 5MHz-100MHz - Oscilloscope clamp test probe kit - 10:1 and 1:1 attenuation ratio Test probe for oscilloscope, kit with all the material as spare part or additional cable. Ergonomic clamp with x10 or normal x1 attenuation. Code H0212 Available Regular price €12.00 -€1.00 Price €11.00
Oscilloscope Rigol MSO5074 70 MHz, 4 channels 4-channel digital mixed-signal oscilloscope with 16 digital channels. Bandwidth 70 MHz, real time sampling rate 8 GSa/s, 9" colour display, 200 Mpts memory and the ability to record up to 500,000 oscillograms/second. Integrates 7 independent instruments in 1 Code H0330 ✗ Out-of-Stock Price €1,315.90
Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Available Regular price €91.90 -€2.00 Price €89.90
Hantek CC-650 BNC Clamp (650A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0241 Available Price €107.90
Hantek 365A - Virtual Multimeter for PC and iPad, Datalogger and Recorder Virtual multimeter for PC, it replaces a conventional multimeter and also performs functions of autonomous datalogger and recorder. Characteristic: - Continuous measurement and recording of values of voltages, currents, resistances, capacity, etc., in real time and with creation of graphs and curves, - Electrical insulation, - Compatible with Windows 2000, Windows 7, Windows XP, Win8 / 10 - Plug & play connection via USB, - Simple and intuitive software. Measurements and tolerances: Code K0174 Last items in stock Price €98.90
Power supply ZL305 30V / 5A Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0306 ✗ Out-of-Stock Price €64.99
Power supply 30V 5A UNI-T UTP3315TFL Stabilized power supply with adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5 A. The fan cools the power supply and can operate in constant mode. Power supply 30V 5A UNI-T UTP3315TFL features: - Input voltage: 230VAC - Output voltage: 0-30V adjustable - Output current: 0-5A adjustable - Backlit display - Protection against over-consumption and short circuit - Cooled by fan - Includes crocodile clip cables Uni-T UTP3315TFL datasheet Load Regulation Voltage & lt; = 0.01% + 3mV Current & lt; = 0.2% + 3mA Line Regulation Voltage & lt; = 0.01% + 3mV Current & lt; = 0.1% + 5mA Ripple and Noise Voltage 1mV rms Current 3mA rms Code H0181 Last items in stock Price €119.50
Uni-T UTP1305 Laboratory Power Supply The UTP1300 series are single channel linear DC power supplies with low ripple / noise, overload protection and constant voltage / current characteristics. Maximum power: 300 W Adjustable voltage and current Code H0318 Last items in stock Price €129.00
Power supply 30V 5A Zhaoxin RXN-305D Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0156 ✗ Out-of-Stock Price €69.00
JDS6600 DDS Dual Channel Wave Function Generator Signal source. The JDS6600 series DDS signal generator can generate sine waves, square waves, triangle waves, pulse waves and arbitrary waves, etc. The frequency will be up to 15MHz. And it has duty cycle correction, amplitude modulation function and frequency sweep function etc. It can display output signal, amplitude and frequency at the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratories. There are 5 models, JDS6600-60M, JDS6600-50M, JDS6600-40M, JDS6600-30M and JDS6600-15M. The main difference is the maximum sine wave output frequency. JDS6600 -15MHZ is the maximum output frequency of the sine wave. Code K0233 Last items in stock Price €109.50
Logic Analyzer 8-Channel 24MHz USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).It allows you to record and display digital data read on the computer.Logic Analyzer 8-Channel 24MHz features:- 8 channels- 24MHz sampling frequency- 1000M samples- USB power- USB 2.0 HiSpeed- 5V supply voltage- LED - power indicator- LED - logic indicator 0-1 on channel 1- USB connectionYou can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V. Code K0080 Available Price €8.49
Desktop multimeter - laboratory meter UNI-T UT801 Digital benchtop multimeter for laboratories, to measure AC/DC current and voltage, resistance, capacitance, temperature, frequency, check continuity of circuits and diodes Code H0310 Last items in stock Regular price €108.90 -€15.00 Price €93.90
Digital Multimeter DT321B Voltmeter DT321B Digital Multimeter, Portable Multimeter, AC / DC Voltage Meter, Blue Backlight, Battery tester, Transistors tester, Acoustic Continuity Tester. Code H0195 Available Regular price €10.99 -€1.00 Price €9.99
Digital Multimeter Uni-T UT33D+ The new LCD display design provides a clearer screen and a better user experience. The UT33 + series improves product safety standards, ensuring that users can work safely in the CAT II 600V environment. Code H0191 ✗ Out-of-Stock Price €15.99
Digital Multimeter Uni-T UT39A+ Modern compact digital multimeter with large LCD display provides and enhanced user experience. Voltage / current / resistance / capacitance analysis as well as diode, transistor and continuity testing. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0320 ✗ Out-of-Stock Price €23.90
Digital Multimeter Uni-T UT39C Modern compact digital multimeter with large LCD display that provides a better user experience. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0203 ✗ Out-of-Stock Price €23.90