Instrumentation

Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode.

The JDS6600 series DDS signal generator can generate sine waves, square waves, triangle waves, pulse waves and arbitrary waves, etc. The frequency will be up to 15MHz. And it has duty cycle correction, amplitude modulation function and frequency sweep function etc. It can display output signal, amplitude and frequency at the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratories. There are 5 models, JDS6600-60M, JDS6600-50M, JDS6600-40M, JDS6600-30M and JDS6600-15M. The main difference is the maximum sine wave output frequency. JDS6600 -15MHZ is the maximum output frequency of the sine wave.

USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).
It allows you to record and display digital data read on the computer.
Logic Analyzer 8-Channel 24MHz features:
- 8 channels
- 24MHz sampling frequency
- 1000M samples
- USB power
- USB 2.0 HiSpeed
- 5V supply voltage
- LED - power indicator
- LED - logic indicator 0-1 on channel 1
- USB connection
You can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.
Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V.

This connector is widely used in thermocouple and RTD circuits, giving a fast and good contact solution. It is designed with a good insulation, metal pins, its construction ensures a good contact.

Instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute)

Compact instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute)

The device is designed to find and identify cables without disturbing the insulation. Finds broken wires, fault points and continuity test.

The voltage / power / battery level indicator KA2284 contains five LED lights that light up progressively as the voltage increases, from green to red to yellow.
It is ideal for your projects that require voltage level indicators, such as battery capacity and audio level indicators.
The built-in potentiometer adjusts the range (sensitivity) of the LED display, and the DC or AC input can be selected via the P2 bridge.
The AC and DC input can be controlled with bridge P2: bypassed for DC, open for AC.
Adjustable power level through the potentiometer. Power Level KA2284 Indicator Module 5 LED features:
- Operating voltage: 3.5 - 12 VDC
- 5 level LED KA2284 controller
- Adjustable power
- 4 pin terminal:
       - IN: Input voltage to measure

Digital microscope with 500x zoom, 8 LED lights and support for microscope included.
Discover the emotion of a completely new microscopic world, totally hidden from the naked eye.
This USB digital microscope can magnify objects up to 500 times its original size and uses a dynamic image sensor and eight super bright white LED lights to create detailed images.
Connect the microscope to your computer via USB and admire each image on your screen.
You can see details like skin pores, individual cotton threads, milky clouds or amber inside THC crystals or even small scratches in a collectable coin that would be impossible to detect with the naked eye, can be easily seen with this amazing USB digital microscope.

FDY10-S is a new measuring device with integrated double function, detection and measurement.
During discharge, the LED shows the voltage, the current, the power in real time. After completing the battery discharge, it will display the results of the measurement, such as the download time.
The host and the heating elements are separated, high stability.
The measurement error is minimal and the most accurate results are due to the application of the measurement mode of the 4-wire system.
Availability to configure the automatic slide show function to verify visually and clearly the operating states and parameters, due to the display mode based on the combination of the LED indicator light.
Operation sound indication and alarm for the end of the discharge.

With the logic signal state tester it is possible to detect 0, 1, high impedance states. The indication reading is displayed by means of LEDs. The supply voltage is 5-15V.