Filter By


Filter By

Price

Price

  • €1.00 - €3.00

Chip

Chip

Tipo de conversión

Tipo de conversión

Logic Converters

Many electronic devices use a logic voltage of 3.3V. Some boards, such as the Arduino UNO, are not suitable for these voltages, so it is necessary to use a converter that will make it possible to switch from one voltage to another. There are two types of logic converters: uni-directional and bidirectional. Uni-directional converters have all inputs associated with one voltage, and outputs with the other. Bi-directional converters have both inputs and outputs at each voltage value. Bi-directional converters can also be automatic and interchange output ports with input ports depending on the signal. Check our offer to find the most appropriate converters for your project and consult our forum or technical information to find out more about how they work.

Logic Converters

Subcategories

Showing 1-2 of 2 item(s)

USB to RS485 USB to 485 Max485 Converter

Ideal for connecting RS485 devices to your PC through the USB port. USB to RS485 USB to 485 Max485 Converter features:
- CH340 controller
- Supported OS: Win XP, Vista, Win 7.8, OS, Linux
- Work with Modbus, Profibus
- USB 2.0 specification with 6Mbps of maximum speed
- Measures: 60x 18x 14 mm

C0003

Price €2.69

Active filters

  • Chip: Max485

Level converters

Microcontrollers and peripherals often work on different logic levels - that is a 1 signal is indicated by a 3.3V in some circuits and by 5.0V in other. To make them "talk" to each other you need to bump up the signal or lower it down. And that is where level converters come into play. The easiest way to go about it is to get a bi-directional making it universal and easy to connect the circuit both ways - from higher to lower voltage and the other way around.

USB converters

Another "difficulty" in connecting and in general getting around with your new Arduino or any other controller might be connecting it to your PC or laptop. We are all well used to the USB ports and it is not surprising by all means. They are fast, they convenient. However, back in the day there plenty of standards used for communication and interestingly most of them are still used, even though maybe not in such popular uses. The two most used standards of transmission are RS232 and RS485 - often served by a popular 9 pin DB connector. However, for the development boards, what is the most probable is that you will be playing with straight 4 pin TTL connection. There is a range of controllers allowing for this conversion - starting with the class, quality and reliability of FT232 by FTDI through PL2303 through CH340. You name it we have it, in all price levels and from range of renowned and a bit less renowned producers!

ATmega programmers

Last but not least, you might not only need to connect your board to a laptop, but as well to program the ATmega on it. Well, you will need yet another equipment for that. ATmega programmers come in all kinds and with range of different functionalities. Revise our offering, and find an easy to use and effective microcontroller programer