Air quality sensors

Air quality sensors can inform you about air pollution by selected particles or gases, be it dust or CO2. The most important parameters of sensors are their sensitivity and power supply voltage. Check out our offer and training materials to learn more. 

Air quality sensors

Subcategories

Showing 1-14 of 14 item(s)

NDIR CO2 Sensor MH-Z14A Carbon dioxide detection

MH-Z14A NDIR infrared gas module is a small size and common type sensor using the non-dispersive infrared (NDIR) principle to detect the existence of CO2 in air, with good selectivity, non-oxygen dependent and long lifetime.

S0149

Regular price €29.95 -€6.00 Price €23.95

PMS5003 High Accuracy Particle Concentration Sensor

The sensors can be integrated into a variety of instruments associated with a concentration of airborne particles to improve equipment, provide timely concentration, and have Exact data.
Present the laser that scatters products on airborne particles, at the same time at a specific angle collect scattered light, changing the intensity curve that scatters over time.
The microprocessor uses the algorithm based on the MIE theory to deduce the grain size contained in the air and the concentration of the particles per unit and quantity. Characteristic: - Power supply: 4.5-5.5 VDC
- Measurement range: 0.3-1.0ï¼ ›1.0-2.5ï¼› 2.5-10 µm (micrometer)
- Accuracy of count: 50%@>

S0046

Price €27.90

Dust Sensor Module PPD42NS PM2.5

This module is a dust sensor capable of detecting more than one micron of dust particles.
It has two types of output: output of 4V high-level signal for a clean environment and 0.7V low-level signal for a particle-laden environment.
Its power supply is 5VDC and the particle detection range is maximum at 8000 units per 283ml. Dust Sensor Module PPD42NS PM2.5 features:
- Supply voltage: 5VDC
- Working current: 90mA
- Sensitivity: 0.5V / ( 0.1 mg / m3)
- Particle detection minimum value: 1 micron
- Output mode: Hi = 4V impulses (clean environment); Lo = 0.7V (charged environment)
- Temperature working: 0-45 ° C
- Working humidity: 0-90% RH
- PCB size: 59x45x22 mm

S0123

Regular price €11.89 -€2.00 Price €9.89

Air quality sensor ZP07-MP503 Gas detection

The ZP07-MP503 air quality module offers high sensitivity with low power consumption and long life. Calibration before shipment from 10 seconds to 3 minutes max. with automatic warm-up function. Automatic fault check.

S0150

Price €5.45

CJMCU-811 CCS811 Carbon monoxide VOC CO Digital air quality gas sensor

The Carbon Monoxide sensor is a low-power digital gas sensor which has a CCS811 sensor and an 8-bit microcontroller, contains an analog-digital converter so that it can detect indoor air quality which can detect monoxide carbon (CO) and a wide range of volatile organic compounds (VOCs). It is a sensor designed to monitor air quality inside personal devices such as mobile devices and smart watches, with low power consumption that can be used with battery

S0140

Price €17.95

MQ-135 Air Quality Sensor

High sensitivity to Ammonia (NH3), Nitrogen oxides (NOx), Alcohol, Sulphides, Benzene (C6H6), CO2, smoke and other harmful gases.  The MQ-135 sensor is to sensible for other gasses in the air so that is not possible to get good values for CO2 from it.
MQ-135 Air Quality Sensor features:
- Main chip: MQ-135 natural gas sensor and comparator LM393
- Working voltage: 5V
- Current: 150mA
- Digital output: TTL 0/1
- Analog output: analog voltage sensing value
- Quick response features:
- Detection concentration:
   10ppm - 300ppm NH3
   10ppm - 1000ppm Benzene
   10ppm - 300ppm Alcohol
- Adjustable sensitivity with the potentiometer
- Size: 32mm x 20mmx 18mm

S0034

Price €2.45

Air Monitoring HAT for Raspberry Pi

This HAT is an open source portable sensor that provides the level of suspended particulate matter quantity with its mass. It has a powerful and high-tech PMSA003 sensor that provides the information of suspended particulate matter (PM1.0, PM2.5, PM10) in the air per unit volume.

RA127

Price €56.90

Air purifier with HEPA filter

This air purifier uses a HEPA filter to safely remove viruses, bacteria, mold, mildew, dander, etc. Filters up to 99.5% of dust, pollen, tobacco smoke, mould spores and pet dander. Keeps the environment clean.

VE018

Price €89.00

Dehumidifier and air purifier 2 in 1

This air purifier uses a HEPA filter to remove viruses, bacteria, mould, dander, etc. safely. The dehumidifier regulates humidity in the bathroom, kitchen, etc. Filters up to 99.5% of dust, pollen, tobacco smoke, mould spores and pet dander. Keeps the environment clean.

VE019

Price €149.00

MH-Z1311A low-power consumption NDIR CO2 sensor

Low power CO2 sensor MH-Z1311A, the current consumption is only 150-200uA, waterproof and anti-corrosion, high sensitivity, additionally characterised by excellent linear output. It is very popular used for battery monitors and IAQ devices.

S0158

Price €29.49

CO₂ Humidity and Temperature Sensor - SCD40 (Qwiic)

This SparkFun CO2, humidity and temperature sensor incorporates Sensirion's new generation of SCD40 photoacoustic CO2 sensors for highly accurate environmental readings. The sensor is capable of detecting concentrations from 0 to 40000 ppm with high precision above 400-2000 ppm ±(50 ppm+5%). The SCD40 has an integrated CMos® temperature and humidity sensor for greater precision.

SP097

Price €74.95

Active filters