Connectors

USB Connector, Shielded, Micro USB Type B, USB 2.0, Receiver, 5 Way, Surface Mount features:
- Application: for mounting on PCB boards,
- Signal contacts 1.0A,
- Contacts power 1.8A,
- Maximum supported voltage: 30 VAC (RMS)
- Component type: USB 2.0 Micro-B receptacle
- Color: gray,
- Female connector,
- Nailed to mating part: yes,
- Locking to mating part: no,
- Connector material: Copper and metal alloy,
- Material of Pins: Gold Alloy,
- Orientation: Right Angle,
- PCB Retention: None,
- Pitch - Mating Interface: 0.65mm,
- Pitch - termination interface: 0.65mm,
- Port: 1,
- Surface Mount Compatible (SMC): yes,

USB 2.0 female connector type B right angle with input / output interface High-speed, shielded to ensure greater EMI / RFI protection and pluggable in hot environments.
USB 2.0 Type B female connector features:
- Application: for mounting on PCB boards, RF communications
- Black thermoplastic housing
- Tin-plated housing,
- Contact material: alloy cover
- Female connector, - USB 2.0 Type B,
- Mounting Type: THT,
- Connector Mounting: Through Hole,
- Orientation: Right Angle,
umber of Positions: 4 ways,
- Port 1,
- Working temperature: -40 ° C - + 85 ° C,
- Contactor coverage: gold,
- Resistance of contact ‰ ¤ 30 mΩ
ominal current ‰ ¤ 1 A
ominal voltage 30 V AC

Power supply fixing to chassis with 2.4 mm central PIN.
Characteristic:
- Contact resistance 50 mOhm
- Insulation resistance 100 MOhm at 500 V DC
- Welding heat resistance 260ºC ± 5ºC ± 3 seconds
- Duration 5,000 cycles (25 x minute)
- Insulation dielectric strength 260 V ~ / 1 minute
- Material PBT 15% PV - UL94-V0
- Flammability UL94 V-0
- Fixed contact material, tin plated brass
- Flexible contact material, tin plated brass
- Central pin material, tin plated brass - Center contact diameter 2'4 mm - Quantity: 1.

Insulated connectors set 175 pcs. 18 types
Set of insulated connectors 175 units 18 types features:
Dimensions of the plastic box:
- Width: 280 mm
- Depth: 185 mm
- Height: 42 mm
Technical data of the connectors:
- Material: tinned steel
- Insulation: PVC

9-way mounting solder sub-D female connector.
9-pin female sub-D connector for soldering features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 9
- The connectors are Supplied with stamped and formed contacts
- Straight female connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

9 way mounting solder sub-D male connector.
9-pin male sub-D connector for soldering in copper alloy features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 9
- The connectors are supplied with stamped and formed contacts
- Straight male connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

Sub-D female connector 26 pins THT for soldering with a 90 ° spatial orientation with threads as far as the male connector with screws connects.
Sub-D connector 26-pin female THT with 90° angle thread features:
- Female connector
- Number of pins: 26 - Connector type: D-Sub HD
- Interlocking system: screws
- Spatial orientation: 90 ° angular
- Electrical mounting: THT
- Thread: UNC4-40
- Contactor material: brass
- Contactor coverage: gold
- Insulation material: polyamide

25 way mounting solder sub-D male connector.
25-pin male sub-D connector for soldering in copper alloy features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 25
- The connectors are supplied with stamped and formed contacts
- Straight male connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

Standard 9.4mm THT blue 15-pin Sub-D male connector for soldering in 90 ° spatial orientation with threads on the the male connector with screws is connected.
Blue 15-pin standard THT male connector 9.4mm with 90° angle thread features:
- Color: blue
- Connector male
- Number of pins: 15
- Connector type: D-Sub HD
- Connection version: 9.4 mm
- Interlocking system: screws - Spatial orientation: 90 ° angled
- Electrical mounting: THT
- Thread: UNC4-40
- Contactor material: brass
- Contactor coverage: gold - Insulation material: polyamide - Working temperature: -55 ° C - + 105 ° C

The USB (Universal Serial Bus), is an industrial standard bus that defines the cables, connectors and protocols used in a bus to connect , communicate and supply power between computers, peripherals and electronic devices.
This female type B USB connector adapter soldered on a PCB board is ideal for use in your projects.
It has connection points where you can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
USB Type B Female 2.0 Connector Adapter with PCB features:
- Connector type: USB Type B Female,
- Internal color: White,
- Nominal voltage: 30v DC,
- Maximum current: 1A DC,
- Insulation resistance: 1000Mohm,
- Operating temperature: -25ºC to + 85ºC,

The 2.5mm female jack connector is a connector to provide power to computers, LED TVs, routers, etc ...
This 2.5mm female jack connector adapter soldered on a PCB board, is ideal for use in our projects.
It has connection points where we can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
Adapter 2.5mm female power jack with PCB features:
- Connector type: 2.5mm female jack ,
- Color: black,
- Nominal voltage: 12v DC,
- Maximum current: 0.5A DC,
- Insulation resistance: ‰ ¥ 100MΩ,
- Operating temperature: -25ºC to + 85ºC,
- Number of output pins: 3
- Pitch between output pins: 2.54mm.

3.5mm Audio Jack Breakout Headphone Video Audio MP3 Jack Module. This female jack connector adapter 3.5mm audio soldered on a PCB board, it is ideal to use in our projects. TRRS connectors are the audio-style connectors seen on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve", reflecting the fact that unlike a standard stereo connector, this one actually has three conductors and a ground. 

It is not possible to reverse the polarity by mistake.
JST PHR-2 Connector Male 2 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-board Contactor raster: 2mm Number of pins: 2 Electrical mounting: THT Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: vertical technical data sheet PH series

It is not possible to reverse the polarity by mistake.
JST PHR-3 Male 3 PIN 2mm connector features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-board Contactor raster: 2mm Number of pins: 3 Electrical mounting: THT Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: vertical technical data sheet PH series

It is not possible to reverse the polarity by mistake.
JST PHR-2 Female 2 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: plug Connector class: female Type of connector: conduit-board Raster of contactors: 2mm Number of pins: 2 Mechanical mounting: for conduit Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Connection version: contactless technical data sheet PH series

Terminal for JST PHR Female Connector 2mm features:
Manufacturer JST Connector series: PH Connector: contact Type of connector: female Type of connector: conduit-plate Mechanical assembly: crimped Working voltage: 100V Working current: 2A Material: phosphor bronze Cable size: 30AWG..24AWG Compatible with: JST PHR-2 Female 2 PIN 2mm Connector JST PHR-2 Female 3 PIN 2mm Connector PH series data sheet

It is not possible to reverse the polarity by mistake.
JST PHR-2 Connector 3 PIN Female 2mm features:
Manufacturer JST Connector series: PH Connector: plug Connector class: female Type of connector: conduit-board Raster of contactors: 2mm Number of pins: 3 Mechanical mounting: for conduit Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Connection version: contactless technical data sheet PH series

Manufacturer JST Connector Series : PH Connector : contact Connector Class : female Connector Type : conduit

Polarity cannot be reversed by mistake.
90 degree angle connector. JST PHR-2 Connector Male Angle 2 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-plate Contactor raster: 2mm Number of pins: 2 Electrical mounting: THT Working voltage: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: horizontal data sheet PH series

Polarity cannot be reversed by mistake.
90 degree angle connector. JST PHR-2 Connector Male Angle 3 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-plate Contactor raster: 2mm Number of pins: 3 Electrical mounting: THT Working voltage: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: horizontal data sheet PH series

Blue 2 pole PCB mount screw terminal 5.08mm pitch Printed Circuit Board Terminal 2 poles 5.08mm pitch features:
Number of Contacts: 2
Pitch: 5.08mm
Number of Rows: 1
Mounting Type: PCB
Gender: Male
Allowable Section: 1.5mm2 (22- 14 AWG)
Termination method: screw
Type: screw terminal block
Nominal current: 16A
Nominal voltage: 250V
Color: blue
Material: Nylon 66
Depth: 10mm
Width: 7.5mm
Length: 10mm

Blue 2 pole PCB mount screw terminal 5.08mm pitch Printed Circuit Board Terminal 3 poles 5.08mm pitch features:
Number of Contacts: 3
Pitch: 5.08mm
Number of Rows: 1
Mounting Type: PCB
Gender: Male
Allowable Section: 1.5mm2 (22- 14 AWG)
Termination method: screw
Type: screw terminal block
Nominal current: 16A
Nominal voltage: 250V
Color: blue
Material: Nylon 66
Depth: 10mm
Width: 7.5mm
Length: 10mm

Quantity: 1 meter Characteristic: - Temperature range: -20 to 80 degrees centigrade - Max. operating voltage: 60 V (RMS) - Nom. 1 kHz capacity: 15 pf / ft - Max. pulling force: 15.70 kg - Nominal weight (305 m): 8.2 kg - Min. Radius of curvature: 12.7mm Construction and dimensions of the cable: the Conductor: - Material: CCA - Dimensions of the conductor (diameter of a single cable): 0 , 48 mm (24 AWG) - Conductor outer insulation: polyethylene. - Insulated conductor dimensions: 0.89 +/- 0.05 mm External insulation: - Material: PVC - External dimensions cable: 5.0 +/- 0.20 mm

Quantity: 1 unit Type 8p8c

This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds

MR30PW-M Socket DC supply 3 pins, current rating: 15A, rated voltage: 500V 

MR30PW-FB Socket DC supply female 3 pins, current rating: 15A, rated voltage: 500V 

Uninsulated female flat faston power supply terminal 6.3 / 0.8 mm

This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person.

Simple breadboard for your MyoWare Muscle Sensor. You can use the provided area of the shield to solder in any custom circuit you can think of. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid.

MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V.

This is your simple three conductor sensor cable with electrode pad wires. These cables measure 24" long and feature a 3.5mm audio jack on one end with snap type receptacles for biomedical sensor pads.

Connector with 40 pins in double rows, ready to break and with 90 ° angle for vertical use.

Male jack connectors (2.1mm internal and 5.5mm external)  for powering devices such as 12V/ 24V LED strips, CCTV (Cameras), Arduino.  Easy to install, quick connector without screw - Quick Wire Connector.

Female jack connectors (2.1mm internal and 5.5mm external)  for powering devices such as 12V/ 24V LED strips, CCTV (Cameras), Arduino.  Easy to install, quick connector without screw - Quick Wire Connector.

This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person.