Arduino sensors

The GY-906 BAA is a plate-mounted temperature sensor, based on an integrated 3 V infrared thermometer, single zone, medical precision, compensated gradient, within 3 cm the precision is higher, approximately 0.5 degrees

The GY-906 BCC is a plate-mounted temperature sensor, based on an integrated 3 V infrared thermometer, single zone, medical precision, compensated gradient, accuracy within 5 cm is approximately 0.5 degrees higher

The GY-906DCI is a plate-mounted temperature sensor, based on an integrated 3 V infrared thermometer, single zone, medical precision, compensated gradient, within 15 cm the accuracy is high, approximately 0.5 degrees

This detection module that allows you to detect your heart rate and blood oxygen level from your Arduino project. You can monitor your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply press the sensor with your finger and wait for the reading of hemoglobin (Spo2), heart rate and Perfusion Index (PI%). It is a solution as an integrated heart rate sensor and pulse oximetry, which includes two LEDs, a photodetector and is optimized for analog low noise optics.

A waterproof pentaband antenna X000016  for all your wireless projects with Arduino and development boards

This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together.

The accelerometer sensor is an add-on for your RedBot that provides shock and motion detection. The sensor works by measuring acceleration forces on the x, y and z axes. By measuring the amount of acceleration (or lack thereof), your robot can better understand its movements.

Level sensor for liquids with float. The liquid level sensor acts as a switch. Liquid level float sensors are used when constant control and regulation of the liquid level (water, oil and other fluids) is required such as extraction pumps. The sensor is equipped with a float with a magnet which, acting by the buoyancy force of the fluid, moves along the tube, shortening or opening the reed switch.

It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where the level of non-corrosive liquids such as water tanks or aquariums needs to be monitored. It is made of stainless steel.

Level sensor for liquids with float. The liquid level sensor acts as a switch. Liquid level float sensors are used when constant control and regulation of the liquid level (water, oil and other fluids) is required such as extraction pumps. The sensor is equipped with a float with a magnet which, acting by the buoyancy force of the fluid, moves along the tube, shortening or opening the reed switch.

It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where the level of non-corrosive liquids such as water tanks or aquariums needs to be monitored. It is made of stainless steel.

Level sensor for liquids with float. The liquid level sensor acts as a switch. Liquid level float sensors are used when constant control and regulation of the liquid level (water, oil and other fluids) is required such as extraction pumps. The sensor is equipped with a float with a magnet which, acting by the buoyancy force of the fluid, moves along the tube, shortening or opening the reed switch.

It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where the level of non-corrosive liquids such as water tanks or aquariums needs to be monitored. It is made of stainless steel.

Capsule Electret Condenser Microphone 9.5mm

This sensor behaves like a switch that closes the circuit when both parts are put together. Ideal for intrusion detection, alarm system, light control and opening and closing devices. 

The Arduino turbidity sensor SEN0189  detects water quality by measuring turbidity levels. It can detect suspended particles in water by measuring the light transmittance and the scattering coefficient, which changes with the amount of total suspended solids (TTS) in the water.

MQ-7 Carbon Monoxide Sensor Module. The sensor detects the concentration of CO (carbon monoxide) and flammable gases. It has a goldpin connector raster 2.54 mm. It is powered by 5 V. It has digital and analogue outputs, which makes it compatible with most runtime modules including Arduino.

Gravity: SHT1x Temperature & Humidity Sensor (DFR0066) Accurate, durable, highly compatible and easy to use, it has all the attributes that a superior temperature and humidity sensor requires.

The DFRobot heart rate monitor sensor (SEN0213) is used to measure the electrical activity of the heart.

The BME280 is an environmental sensor (SEN0236) integrating a temperature sensor, a humidity sensor and a barometer. Powered from 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 0 %RH to 100 %RH, pressure: 300 hPa to 1100 hPa.

Low power CO2 sensor MH-Z1311A, the current consumption is only 150-200uA, waterproof and anti-corrosion, high sensitivity, additionally characterised by excellent linear output. It is very popular used for battery monitors and IAQ devices.

Level sensor for liquids with float. The liquid level sensor acts as a switch. Liquid level float sensors are used when constant control and regulation of the liquid level (water, oil and other fluids) is required such as extraction pumps. The sensor is equipped with a float with a magnet which, acting by the buoyancy force of the fluid, moves along the tube, shortening or opening the reed switch. It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where the level of non-corrosive liquids such as water tanks or aquariums needs to be monitored. It is made of stainless steel.

Level sensor for liquids with float. The liquid level sensor acts as a switch. Liquid level float sensors are used when constant control and regulation of the liquid level (water, oil and other fluids) is required such as extraction pumps. The sensor is equipped with a float with a magnet which, acting by the buoyancy force of the fluid, moves along the tube, shortening or opening the reed switch. It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where the level of non-corrosive liquids such as water tanks or aquariums needs to be monitored. It is made of stainless steel.

Level sensor for liquids with float. The liquid level sensor acts as a switch. Liquid level float sensors are used when constant control and regulation of the liquid level (water, oil and other fluids) is required such as extraction pumps. The sensor is equipped with a float with a magnet which, acting by the buoyancy force of the fluid, moves along the tube, shortening or opening the reed switch. It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where the level of non-corrosive liquids such as water tanks or aquariums needs to be monitored. It is made of stainless steel.

The Grove Starter Kit for Arduino is one of the best Arduino starter kits for beginners. It includes an Arduino-compatible base shield and 14 additional Arduino sensors and accessories. With this Grove starter kit, you can create any Arduino project you want.

This starter kit aims to quickly get you connected to Seeed Studio BeagleBone® Green. It contains 10 Grove modules and we provide you with 3 step-by-step projects to get you started quickly with all modules. The set comes in a handy box and is attractively priced!

Gravity: Starter Kit for Arduino is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform. The Gravity Kit presented here is equipped with numerous electronic components, such as a motherboard that works with the Arduino Uno - DFRduino Uno v3. DFRobot Gravity IO Expansion shield for Arduino is enclosed as well.

Microwave radar presence and motion sensor using FMCW technology, compatible with Arduino and Raspberry Pi.

Arduino compatible analog TDS (Total Dissolved Solids) sensor to measure water hardness, water purity. It can be used to test water quality in domestic, hydroponic and other applications. Measures TDS from 0 ppm to 1000 ppm. Power supply from 3.3V to 5.5V.

The solar power management module is designed for 6V~24V solar panel. It can charge Li 3.7V battery through solar panel or USB connection, and provides 5V/1A regulated output.

Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins.  Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules.

The sensor measures the current flowing in the cable without cutting it. The measurement is made on a single insulated wire, the output is an analog voltage from 0 to 1 V. Sensor SCT-013-000, Non-Invasive 100A AC Current Meter

Pressure sensor sometimes called strain gauge. Load cell for measuring weights up to 50kg. The transducer measures the strain of the metal structure and converts it into a few mV.

mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module - human presence, FMCW, Configurable Underlying Parameter, Arduino support, Home Assistant, ESPHome