Arduino Modules

The bluetooth HC-05 module is one of the best options for projects where you need wireless communications.
The transceiver module (transmission / reception) allows bluetooth wireless connections as master or slave, works transparently as if making a wired RS-232 TTL serial connection. Arduino Wireless Module HC-05 HC05 Bluetooth features:
- CSR BC417 Chipset
- Power: 3.3.
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Approximate range: 10m
- Security: Authentication and encryption
- Speed- & gt; Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
temperature: -20 ºC to +75 ºC

The Bluetooth HC-06 module is one of the best options for projects where you need wireless communications. Arduino Wireless Module HC-06 HC06 features:
- CSR BC417 Chipset
- Power: 3.3V
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz band ISM
- Modulation: GFSK
- Range approx. 10m
- Security: Authentication and encryption.
- Speed- & gt; Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
- Working temperature: -20 ºC to +75 ºC - Working current - pairing: 80 mA
- Transmission: 8mA
- Size: 28 x 12mm

USB DC 5V Bluetooth Audio features:
- You can connect it with your smartphone
- Power: DC 5V micro USB
- Speaker: 4 ~ 8 Ohm - Audio Jack: 3.5mm
- SD card: support MP3 / WMA / WAV / FLAC format
- The transmission distance could be up to 10m
- Size: 50 x 40 mm

This module has three modes (control, music and bluetooth). The audio files can be saved on the U disk and on the TF card.
Its remote control allows you to control the audio output (volume down or up, music change, mode change). Bluetooth Decoder Module Amplifier Audio Receiver USB TF features:
- Interfaces:
       - 5V micro USB supply
       - USB audio
       - U disk
       - LED
       - TF card
       - IR remote
       - AD key interface to connect external circuits
       - Bluetooth decoder
       - 3.5mm stereo output
       - Left and right 3W channels handling speaker
       - 2 3W amplifiers
- Supply voltage: 3.7-5VDC
- Signal / noise ratio (SNR): 90 dB

This product is a Bluetooth module BLE 4.0 UART without adapter, low energy with serial transceiver.
Logic level conversion circuit. No external level of 5V is needed to become a 3.3V level.
The power input port is protected against the anti-circuit, to avoid the inverted accidental power plug, which leads to the module burn
HM-10, Bluetooth module HM-11 series using IT chip CC2540 / 2541, configuration 256Kb space, support
In commands.
You can change the paper (master and slave mode) and the baud rate, the device name, the pairing of the password and other parameters, convenient and flexible. BLE 4.0 UART Bluetooth Low Energy Module without Adapter features:
- Version AT-09 CC2541 Arduino Android IOS BLE
- Serial transceiver

The new SensorTag IoT kit invites you to realize your product idea connected to the cloud.
The new SensorTag now includes 10 low-power MEMS sensors in a small red package.
And it's expandable with DevPacks to make it easy to add your own sensors or actuators.
Connect to the cloud with low-power Bluetooth and Get your sensor data online in 3 minutes.
The SensorTag is ready to go right away with an iOS and Android app, no programming experience to get started.
The new SensorTag is based on The CC2650 Wireless MCU, which offers 75% less power consumption than previous Bluetooth low energy products.
This allows the SensorTag to run on batteries, and offers years of battery life with a single coin cell battery.

Work with Bluetooth compliant devices including notebook, PDA, digital camera,printer and mobile phone.
Mini Dongle Adapter Bluetooth USB V2.0 Windows XP/VISTA/7 features:
- Bluetooth specification V2.0 - Supporting profiles: networking, dial-up, fax, LAN access and handset - Operation system Windows98, 98se, Me, 2000, XP, Vista, Windows7 - Receiving/sending range: 100m