Filter By


Filter By

Availability

Availability

Brand

Brand

Price

Price

  • €0.00 - €110.00

Chip

Chip

Voltages

Voltages

Firmware

Firmware

Módulo ESP

Módulo ESP

Número de canales

Número de canales

Pines

Pines

Arduino Modules

If Arduino is the brain, sensors are the nose, eyes, and ears, modules could be compared in one sense to the hands, mouth, and feet of our project. But since a robot cannot be directly compared to a human, in the modules we also include communication modules (RF, Bluetooth, WiFi), amplifiers, translators and screens. An Arduino alone is already a powerful tool, however, to reveal its true and complete power you have to complete it with modules. Whether it's a buzzer, MP3 player module, a display or any other - those modules will show you what the Arduino can achieve. Arduino modules are a crucial part of our offering, which we are continually expanding - watch for it and look forward to hearing from you often.

Arduino Modules

Subcategories

Showing 61-120 of 219 item(s)

16 Channel Relay Module 12V 10A

This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL, PLC output).
16 Channel Relay Module 12V 10A AVR features:
- Channels: 16 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 3mA
- Insulation: Yes
- Low shot: 0-2V
- LED indicator: For each channel
- Dimensions: 18x 9x 2cm

RL009

Price €15.49

SIM800L GPRS GSM SIM Board Quadband

SIM800L GPRS GSM SIM Board Quadband features:
Package includes:
- SIM800L module,
- 2x pin headers,
- Spring antenna,
- 3G PCB antenna - 15cm cable.
- Supported SIM format: Micro SIM.

W0017

Price €6.49

Wireless Module Arduino compatible HC-06 HC06

The Bluetooth HC-06 module is one of the best options for projects where you need wireless communications. Arduino Wireless Module HC-06 HC06 features:
- CSR BC417 Chipset
- Power: 3.3V
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz band ISM
- Modulation: GFSK
- Range approx. 10m
- Security: Authentication and encryption.
- Speed- & gt; Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
- Working temperature: -20 ºC to +75 ºC - Working current - pairing: 80 mA
- Transmission: 8mA
- Size: 28 x 12mm

W0018

Price €9.50

2 Channel Relay Module 5V 10A for Arduino

2 Channel Relay Module 5V 10A for Arduino features:
- 5V relay module with 2 optocoupled channels
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- LED indicator: For each channel
- Dimensions: 40x 50mm

RL006

Regular price €1.99 -€0.35 Price €1.64

RFID Module with Card and Pendant

It is compatible with almost any microcontroller, Arduino, PIC, AVR.
It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features:
- Supports Quick CRYPTO1 and MIFARE
- Operating current: 13-26mA at 3.3V
- Standby current: 10-13mA to 3.3V
- Sleep-mode current: <80μA
- Maximum current: 30mA
- Frequency of operation: 13.56Mhz
- Reading distance: 0 to 60mm
- Communication protocol: SPI
- Maximum SPI speed: 10Mbit / s
- Maximum data rate: 10Mbit / s
- Operating temperature: -20 to 80ºC
- Humidity of operation: 5% -95%

M0015

Price €2.79

ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 features:
- Chip ENC28J60 Microchip
- Module: 10Base-T
- 3.3V power
- SPI interface
- 25Mhz speed
- LED status LED
- Hanrun network transformer
- Network Interface board HR911105A
- Operating temperature: -40ºC to + 85ºC
- Dimensions: 55x 35x 16 mm

W0002

Price €8.99

ESP8266 WIFI Module ESP-01 for Electronic Sensor Robotics

WIFI transceiver based on the ESP8266 controller.
It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low power mode:

W0003

Price €1.95

8 Channel 5V 10A Relay Module Arduino compatible

5V Relay Module with 8 opto-coupled channels.
This module can be directly controlled by the microcontroller ( Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL).
8 Channel Arduino 5V 10A Relay Module features:

- Channels: 8 (independent protected with Optocouplers)
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Isolation: Yes
- LED indicator: For each channel
- Dimensions: 54x 135mm

RL008

Price €9.49

Led Matrix 8x8 MAX7219 Soldier

Led Matrix 8x8 MAX7219 Soldier features:
- MAX7219 controller module with 8x8 led matrix + cables
- 8X8 LED matrix controlled by MAX7219 chip
- Led 3mm red color
- SPI communication
- Voltage: 4.7 - 5.3V DC
- Interfaces to manage multiple modules in cascade
- Matrix dimensions: 32mm x 32mm x 8mm
- PCB dimensions: 32mm x 50mm

M0043

Price €2.95

TDA2030A 1X18W Audio Amplifier

TDA2030A 1X18W Audio Amplifier features:
- Chip: TDA2030A
- Power supply: DC 6V ~ 12V
- Channel type: Single channel - Output power: 1 x 18 W
- Output output: 4 ~ 8 Ohm
- Mono mode
- Size (LxWxH): 31.6 x 23.5 mm

M0063

Regular price €3.39 -€1.00 Price €2.39

NFC RFID Keychain Tag 13.56 MHz

NFC RFID Keychain Tag 13.56 MHz features:
- 32 bit unique code
- Protocol: ISO14443
- Compatible with NFC Mifare 1k
- Memory: 1kB EEPROM
- Operating frequency: 13.56MHZ
- Communication speed: 106Kboud
- Reading distance: 2.5-10CM
- Reading time: 1-2MS
- Working temperature: -20ºC to 85ºC
- Number of uses 100,000 times
- Data retention: 10 years
- Material: ABS
- Dimensions 40.5 x 32 x 4.2 mm

M0030

Price €0.99

TDA7498 Class D 2X100W Amplifier

Characteristic: - Quiescent current: 50 mA (without load)
- Efficiency: 90%
- Nominal output power max.: 2 x 100W
- Frequency response: 20Hz to 20KHz
- Operating voltage: DC20V to DC34V
- Recommended supply voltage: DC32V
- Speaker parameters: 6 Ohm , 8 Ohm
- PCB board size: 87 × 72 mm
- Package includes cable

M0035

Price €19.51

Bluetooth Transceiver Module HC-06 Wireless

HC-06 Bluetooth transceiver module with base.
The bluetooth module HC-06 is one of the best options for projects, in which you need wireless communications.
The transceiver module allows bluetooth wireless connections as a slave, ready to listen for connection requests.
Bluetooth Transceiver Module HC-06 Wireless features:
- Chipset CSR BC417
- 3.5V - 5V power
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps
- Supports AT commands for configuration through a serial port
- Working temperature: -20ºC to + 75ºC
- Working current - pairing: 80 mA

W0009

Price €5.39

USB DC 5V Bluetooth Audio

USB DC 5V Bluetooth Audio features:
- You can connect it with your smartphone
- Power: DC 5V micro USB
- Speaker: 4 ~ 8 Ohm - Audio Jack: 3.5mm
- SD card: support MP3 / WMA / WAV / FLAC format
- The transmission distance could be up to 10m
- Size: 50 x 40 mm

M0067

Price €5.79

ESP-12F ESP8266 12F WiFi Board Module

- WIFI module based on the ESP8266 controller
- ESP8266-12F is an improved version of ESP8266-12E
- It works as a standard WiFi 802.11 b / g / n 2.4 GHz. It is equipped with 22 outputs (pitch 2 mm) of which 11 are GPIO, ADC 1 and SPI. A LED and a PCB antenna have been incorporated
ESP-12F ESP8266 12F WiFi Board Module features:
- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP Stack.
- PLL, regulators and integrated energy management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low energy mode: <10 uA
- Integrated 32-bit processor

W0064

Price €3.09

Bluetooth Transceiver Module HC-05 Wireless

- HC-05 Bluetooth transceiver module with base
- The bluetooth module HC-05 is one of the best options for projects where you need wireless communications.
- The transceiver module (transmission / reception) allows bluetooth wireless connections like master or slave, works in a transparent way as if we made a RS-232 TTL serial connection with cable.
Bluetooth Transceiver Module HC-05 Wireless features:
- Chipset CSR BC417
- 3.6 to 6 Vdc power supply
- Bluetooth version V2.0 + EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK
- Reach approx. 10m
- Security: Authentication and encryption.
- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps

W0004

Price €5.39

Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi

Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features:
- Interface type: USB
- Supports IEEE 802.11e draft 802.11n
- Supports USB 2.0, compatible with USB 1.1 and 1.2
- Support systems:
- Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux
- Operating distance: 91 meters indoors, 275 meters in open space
- Transfer rate: 150Mbps (downlink) and 150Mbps (uplink)
- Works with old Wireless-G and Wireless-B networks
- WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM
- Frequency range: 2.4 to 2.4835 GHz
- Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment
- Transmission mode: DSSS

RA015

Regular price €8.49 -€2.00 Price €6.49

Transducer Bone conduction 8 Ohm Speaker 1 Watt

Wired Bone Conductor Transducer - 8 Ohm 1 Watt
This amazing speaker does not have a movable cone like most From the speakers you've seen, instead, a small metal rod is wrapped with the voice coil.
When the current is driven through the coil, the magnetic field makes a piece of metal expands and contracts, if pressed against a flat surface or cavity makes it a speaker! Often these size transducers are pressed against the jaw or ear bone to turn the skull into a speaker socket.
The effect is a perfect quality sound that comes from your head and no one else can hear it. You can also press it against your elbow bone and stick a finger in your ear to listen to the audio transmitted through your arm!

M0113

Price €14.95

Wireless Module AT-09 Bluetooth 4.0 CC2541 IOS BLE

- Bluetooth 4.0 AT-09 BLE Master / Slave module with 6-pin connection base
- This module is very similar to HM-10 module
- Bluetooth protocol: Bluetooth V4.0 BLE specification
- Ultra-low power consumption, in 90uA standby mode
Wireless Module AT-09 Bluetooth 4.0 CC2541 IOS BLE features:

- Chipset based on CC2541
- Bluetooth Class 2
- Industrial level Bluetooth module SPP
- Flash 256Kb
- Integrated chip antenna
- Power supply: + 3.3 VDC 50 mA
- Working temperature: -5 C to + 60 C
- Operating frequency: 2.4 GHz ISM Band
- Modulation method: GFSK (Gaussian Frequency Shift keying)

W0078

Price €4.95

Bluetooth Decoder Module Amplifier Audio Receiver USB TF

This module has three modes (control, music and bluetooth). The audio files can be saved on the U disk and on the TF card.
Its remote control allows you to control the audio output (volume down or up, music change, mode change). Bluetooth Decoder Module Amplifier Audio Receiver USB TF features:
- Interfaces:
       - 5V micro USB supply
       - USB audio
       - U disk
       - LED
       - TF card
       - IR remote
       - AD key interface to connect external circuits
       - Bluetooth decoder
       - 3.5mm stereo output
       - Left and right 3W channels handling speaker
       - 2 3W amplifiers
- Supply voltage: 3.7-5VDC
- Signal / noise ratio (SNR): 90 dB

W0084

Price €5.90

Module Relay 5V Light sensor LDR photoresistor

This module is a three way switch ( COM, NO and NC ) that uses the intensity of the ambient light to control directly the load at the output. Its adjustment potentiometer allows changing the sensitivity and setting the start threshold of the relay. The relay is energized when it is darker than the threshold.

RL016

Price €2.39

Raspberry Pi 2-3 Model B Multifunction Expansion GPIO Module

This module is used to extend the Raspberry's 40 GPIO pins to another set of 2x20 male pins and 8 parallel pins accessible on the terminal blocks in the that test leads are pushed. The electronic board offers great reliability with the Raspberry and is very easy to connect thanks to its existing suitable accessories but not included.
The module offers a set of mini jumpers to configure the GPIO.

RA016

Price €7.95

Wireless Transceiver Module with Antenna CC1101

This external wireless antenna module CC1101 is suitable for Funduino and Arduino projects.
The CC1101 module of 1.2K baud consists of a domestic R & Lotes unit to improve the effective communication distance.
This is a significant improvement over the CC1100 module.
It allows to adjust the speed of the bits for different uses, thus allowing a higher transmission speed.
Supports 2-FSK, GFSK and msk modulations. It also has a high sensitivity (1.2kbps @>

W0083

Price €8.49

Full Color SMD LED Module RGB KY-009

This module specially designed for Arduino will allow you to generate a light of any color (RGB) quickly and accurately.
The SMD LED Module RGB, consisting of an LED capable of creating any color using RGB, has a PWM voltage input with three pins.
These are capable of shining in a wide range of colors thanks to the mixture of the three primary colors (red , green and blue). These types of diodes are called RGB and are made up of three red, green and blue diodes in the same package.
Thanks to the variation of the intensity of these three diodes, we can create a composition of colors. With this led you can handle more than 16.5 million colors.

M0080

Price €2.95

LED Module Full Color RGB Bulb KY-016

This module specially designed for Arduino will allow you to generate a light of any color (RGB) quickly and accurately.
The LED Bulb Module RGB, consisting of an LED capable of creating any color using RGB, has a PWM voltage input with three pins. These are capable of shining in a wide range of colors thanks to the mixture of the three colors. primary (red, green and blue).
These types of diodes are called RGB and are made up of three red, green and blue diodes in the same package.
Thanks to the variation of the intensity of these three diodes, we can create a composition of colors. With this led you can handle more than 16.5 million colors.

M0081

Price €2.95

Lilypad LED Blue

Blue LED.
The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Blue features:
- Operating voltage: 3 - 5 VDC
- Very bright
- Density of the PCB: 0.8 mm
- LED color: blue
- Size: 5.5x12.5 mm
- 1 LED included

M0137

Regular price €0.99 -€0.20 Price €0.79

Lilypad LED Red

LED of red color.
The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Red features:
- Operating voltage: 3 - 5 VDC
- Very bright
- Density of the PCB: 0.8 mm
- LED color: red
- Size: 5.5x12.5 mm
- 1 LED included

M0138

Price €0.99

Lilypad LED Green

LED green.
The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Green features:
- Operating voltage: 3 - 5 VDC
- Very bright
- Density of the PCB: 0.8 mm
- LED color: green
- Size: 5.5x12.5 mm
- 1 LED included

M0139

Price €0.99

Lilypad Button Board

This support is a lilypad button to sew clothing or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Button Board features:
- Density of the PCB: 0.8 mm
- Size: 8x16 mm
- 1 LED included

M0142

Regular price €0.99 -€0.20 Price €0.79

Lilypad Power Supply 5V Step Up with AAA Batteries

This module is a small source of energy, this board was designed to be as small and as indiscreet as possible.
Putting a battery type AAA and operating the power switch, will have a supply of 5 V to power a lilypad circuit.
Use up to 200ma, it is protected against short circuits. This card has AAA battery clips but can use a 1.2V to 5V input, the module increases the voltage up to 5V.
Lithium polymer batteries are an alternative to rechargeable batteries.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Power Supply 5V Step Up with AAA Batteries features:
- Type of batteries connectable: AAA
- Input voltage (of the batteries): from 1.5V to 5V
- Output voltage: 5V

M0140

Regular price €7.99 -€2.50 Price €5.49

Lilypad Slide Switch Board 2 Positions Interruptor

This is a simple slide switch for LilyPad. Use it as a simple On / Off switch, or to control LEDs, buzzers, sensors, etc.
The switches in each panel have a capacity of 4V to 300 mA, but will operate at 5V with a current reduction.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Slide Switch Board 2 Positions Interruptor features:
- Switch two positions: On (ON) / Off (OFF)
- Density of the PCB: 0.8 mm
- Size: 7.75x18.1 mm

M0141

Regular price €1.99 -€0.50 Price €1.49

Lilypad Tri-Color LED RGB

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pressing the red, green and blue channels, you can create any color. Very bright output.
This is a common anode design: to turn on a channel, you simply need to ground one of the R / G / B pins to illuminate that channel.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Tri-Color LED RGB features:
- Operating voltage: 3 - 5 VDC
- Design of common anode
- Density of the PCB: 0.8 mm
- Outside diameter: 20 mm

M0143

Regular price €1.49 -€0.30 Price €1.19

Lilypad Buzzer

The buzzer plate for Lilypad is used for the development and application of configurations that require a buzzer to indicate, for example, warnings, warnings or as part of the correct operation of your device.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Buzzer features:
- Operating voltage: 5 VDC
- Design of common anode
- PCB density: 0.5 mm
- Density of the buzzer: 20 mm
- Outside diameter: 20 mm

M0144

Regular price €2.00 -€0.50 Price €1.50

Pixel Board WS2812 for Lilypad

The pixel board is equipped with a WS2812 that is actually RGB LED with a WS2811 built into the LED.
Several of these individual sessions can be chained together to form a screen or an addressable string.
Each LilyPad is creatively designed to have large connecting pads so that they can be sewn on clothes. Pixel Board WS2812 for Lilypad features:
- Use the WS2812S chip
- RGB color lights
- Each LED can be controlled individually
- You only need one control line and two power cables
- Arduino libraries and routines available
- Density of the PCB: 0.8 mm
- Size: 20x3 mm

M0146

Regular price €6.79 -€2.00 Price €4.79

LiPower Battery Booster Module 5V Output Lilypad

The good thing about LiPower is the ability to use rechargeable lithium polymer batteries.
These batteries are smaller, flatter and last much longer than an AAA battery.
Connect a single-cell LiPo battery, turn on the power switch and you will have a 5V supply to power your LilyPad network. It can deliver the current up to 150mA. Protected against the short circuit.
This board has a JST connector, which will be connected to single cell LiPo batteries terminated in JST.
It also has terminals for charging the LiPo battery with LiPo chargers. Each LilyPad was creatively designed to have large connection pads that allow them to sew on clothes.

M0148

Regular price €7.99 -€1.00 Price €6.99

Expansion Module I/O XBEE

This XBEE module contains everything you need to create your projects, including socket to mount an XBee device, VDC power pins, GND, terminal block to power a servo motor, reset button and much more. The new expansion IO Shield V7.1 offers several advantages and these are its characteristics.
Compatible with the new Arduino Due.

M0150

Price €8.49

GPS Mini Station NEO-6M-0-001 with EEPROM SMA IPEX Ports

It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip.
The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed.
Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC
- Operating current: 45 mA
- Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds
- Navigation update: 5 Hz max. (1 Hz default)
- Capture time: at the start 27s, in operation 1s
- Operating temperature: -40 ° C - + 85 ° C
- separate GPS antenna (not included ): 18x18 mm
- Size: 22x30x13 mm

M0070

Price €14.90

GPS Module GY-GPS6MV2 NEO6MV2 EEPROM with Antenna

It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip.
The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed.
Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC
- Operating current: 45 mA
- Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds
- Navigation update: 5 Hz max. (1 Hz default)
- Capture time: at the beginning 27s, in operation 1s
- Operating temperature: -40 ° C - + 85 ° C
- separate GPS antenna 18x18 mm - Size: 22x30x13 mm

M0071

Price €15.90

SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output

The DC-DC 25A solid state relay has a 3-32VDC input and a 6-60VDC output. It has a maximum load capacity of 25A.
It has a long operating life and high reliability, a compact size. This relay switches very quickly. Fotek SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output 

RL017

Price €7.99

Solid State Relay SSR-25 DA 12A DC-AC Output 24V-380VAC

The DC-AC 12A solid state relay has a 3-32VDC input and a 24-380VAC output. It has a maximum load capacity of 12A.
It has a long operating life and high reliability, a compact size. This relay switches very quickly. Solid State Relay SSR-25 DA 12A DC-AC Output 24V-380VAC 

RL018

Price €7.99

Module Relay 12V Light sensor LDR

This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold.
The optical isolation relay effectively protects the chip and ensures better performance.
This module is used for light detection, brightness detection , control of lamps and automatic equipment. Characteristic: - Channels: 1
- Supply voltage: 12VDC
- Output load capacity: 250V 10A AC / 30V 10A DC
- Relay activation current: & gt; 100mA
- Insulation: Yes
- Indicator LED: Green and Red
- PCB size: 5x2.6 cm / 1.96x1.02 "

RL019

Price €3.49

Voice Recording and Reproduction Module ISD1820

This module works under the characteristics of the integrated ISD1820 and allows you to make recordings of multiple messages or the reproduction thereof, it performs a non-volatile storage. Voice Recording and Reproduction Module ISD1820 features:
- Working voltage: 2.4 - 5.5 VDC
- Model: I073103
- Voice Recorder Chip ISD1820
- Automatic ignition mode dwon
cording duration: 8-20 seconds
- Manual or Automatic Control with an MCU
- With internal audio amplifier, this board can drive 8 ohm 0.5W speaker directly
- Includes a microphone on board to record directly
- The sampling frequency and duration can be different if a single module resistance is changed
- High quality, restored natural voice, can be used as a speaker module

M0157

Regular price €6.95 -€1.96 Price €4.99

Timer Relay Module FRM01

The multifunctional relay control module, FRM01, is designed for customers with different synchronization and control needs.
The FRM01 is controlled by the STM8S003F3P6 microcontroller and has 18 different functions.
Each function can be customized to meet customer needs in a variety of time and power control applications.
The FRM01 is equipped with a high-quality power relay, a high-power voltage transistor, red and blue LED indicators, an LED display on a double-sided PCB board.
The output of the board is driven by a high quality power relay capable of controlling the AC and DC loads. Timer Relay Module FRM01 features:
- Operating voltage: 12 VDC
- 4 buttons: SET, SWI, NUM +, NUM-
- Operating temperature: -20 °C - + 60 °C

M0159

Regular price €9.95 -€2.00 Price €7.95

BLE 4.0 UART Bluetooth Low Energy Module without Adapter

This product is a Bluetooth module BLE 4.0 UART without adapter, low energy with serial transceiver.
Logic level conversion circuit. No external level of 5V is needed to become a 3.3V level.
The power input port is protected against the anti-circuit, to avoid the inverted accidental power plug, which leads to the module burn
HM-10, Bluetooth module HM-11 series using IT chip CC2540 / 2541, configuration 256Kb space, support
In commands.
You can change the paper (master and slave mode) and the baud rate, the device name, the pairing of the password and other parameters, convenient and flexible. BLE 4.0 UART Bluetooth Low Energy Module without Adapter features:
- Version AT-09 CC2541 Arduino Android IOS BLE
- Serial transceiver

W0087

Price €5.31

Buzzer PCB Active 5V Black

This module is an active buzzer for Arduino and emits different sounds at various frequencies.
It does not accept oscillation source, it only receives square waves for drive sound. 

M0162

Regular price €1.29 -€0.15 Price €1.14

Passive Buzzer PCB Long Blue

This module is a passive buzzer, a low trigger level alarm for Arduino. It emits different sounds at various frequencies. The buzzer sounds when the I / O port input is low level. 

M0163

Price €1.29

Passive Buzzer 3-5V Low Level Trigger

When the input port is low, the trio turns on. Then the doorbell comes on and a small red light comes on.
It can be used as the external module for many types of circuits, such as MCUs. Passive Buzzer 3-5V Low Level Trigger features:
- Operating voltage: 3.3-12 VDC
- Current consumption:

M0161

Price €1.35

Voice Module MP3 Player

XY-V17B is a smart voice module, integrated IO segment trigger, control UART series, ONE_line control of a single serial bus, MP3 standard and other functions; Supports MP3, WAV format decoding, maximum storage capacity on 32G TF card, update audio files from TF memory card via USB data cable to connect computer.
Voice Module MP3 Player features:

- Support MP3, WAV decoder format.
- Support sample rate ( KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48.
- 24-bit DAC output, support 90dB dynamic range, support 85dB signal-to-noise ratio.
- Fully compatible with FAT16 / FAT32 file system, 32G TF card with maximum support, 32G U disk support.

M0164

Price €4.90

Buzzer 5V Passive

Buzzer 5V Passive 5 to 12V DC features:
- Input voltage: 4V to 12V
- Diameter: 17mm
- Height: 7mm
- f = 4kHz +/- 500
- Pin Separation: 10mm
- Maximum Current:

M0166

Price €0.59

Buzzer 5V Buzzer active 4 to 7 Vdc

Buzzer alarm to convert electrical signals into acoustic in robotics devices and Arduino projects Buzzer 5V Buzzer active 4 to 7 Vdc features:

- Input voltage: 4V to 7V,
- Diameter: 12mm,
- Height: 9.5mm,
- Pin spacing: 7.6mm,
- Maximum Current: & lt; 30mA,
- Effect - continuous sound,
- Sound intensity: 85dB at 10cm,
- Operating temperature: -20ºC to + 70ºC,
- Quantity: 1 unit

M0170

Price €0.45

Mini vibration engine for Arduino and Raspberry Pi 5 VDC

This mini vibration motor runs on 5 VDC and can be used for Arduino and Raspberry projects. It is a direct current motor.
Mini vibration engine for Arduino and Raspberry Pi 5 VDC features:
- Voltage: 5 VDC,
- Current: 75mA,
- Rotation speed: 1100 (rpm),
- Efficiency: 80%,
- Dimensions: 10x27mm.

M0174

Price €1.00

NFC RFID round card 13.56 MHz

Can be used in Access Control projects and Alarm, Arduino, Raspberry PI, PIC, AVR projects 10x NFC RFID round card 13.56 MHz features:
- 32 bit unique code
- Protocol: ISO14443
- Compatible with Mifare S50 Classic
- Memory: 1kB EEPROM
- Operating frequency: 13.56MHz
- Communication speed: 106Kboud
- Reading distance: 2.5-10CM
- Reading time: 1-2MS
- Working temperature: -20 ºC to 85 ºC
- Number of uses 100,000 times
- Data retention: 5 years
- Material: PVC
- Dimensions: Ø 25 x 0.8 mm
- Quantity: 10 units of NFC 13.56MHz card

M0177

Price €0.49

CJMCU-717 Series Data Logger

This Openlog serial data module is an open source logger that works with a serial connection Simple and supports Micro SD cards up to 64GB. It can store or record huge amounts of serial data and act as a black box. It includes an ATMega328P chip with a high frequency of 16 MHz. All recorded data will be stored on the Micro SD card.

M0181

Price €7.95

Low power Bluetooth / Multi-standard SensorTag CC2650STK TI

The new SensorTag IoT kit invites you to realize your product idea connected to the cloud.
The new SensorTag now includes 10 low-power MEMS sensors in a small red package.
And it's expandable with DevPacks to make it easy to add your own sensors or actuators.
Connect to the cloud with low-power Bluetooth and Get your sensor data online in 3 minutes.
The SensorTag is ready to go right away with an iOS and Android app, no programming experience to get started.
The new SensorTag is based on The CC2650 Wireless MCU, which offers 75% less power consumption than previous Bluetooth low energy products.
This allows the SensorTag to run on batteries, and offers years of battery life with a single coin cell battery.

W0088

Price €45.00

Active filters

Arduino communication modules

Assuming that we haven´t yet mastered AI programming to the maximum, and our robot still requires certain instructions from us, we will definitely need a way of communicating with it. The same goes for the projects in which more than one device has to work in cooperation. Thankfully, a range of companies, including Adafruit and Sparkfun, has delivered us an almost unlimited set of modules that will enable us to do that. Modules Arduino WiFi, modules Bluetooth, modules RF all serve the same purpose, nonetheless depending on the conditions you want to use your project in, one might have several advantages over the others. Revise our materials on blog and tutorials to learn about the benefits of each. 

Whichever you chose, be that standard ESP8266 o DS1307, we definitely have it.

Arduino video cameras

Now that your robot is equipped with a communication module, it can give you back information however it still needs a way to collect it and show it to you (unless you believe you can receive Bluetooth signal yourself). For the first application, you will need sensors, which we cover extensively in the sensor section, or other input devices such as cameras and microphones. For the second application (being able to give you back information), the screen is the most basic device (obviously can be coupled with speakers). We can offer you a wide range of screens and speakers as well as cameras from a variety of producers including Sparkfun, Adafruit, Pololu. Search our offer and see if you can find what you need