Link list

Link list

Filter By

Filter By

Categories

Categories

Availability

Availability

Brand

Brand

Price

Price

  • €0.00 - €160.00

Chip

Chip

Módulo ESP

Módulo ESP

Carga máxima

Carga máxima

Arduino

Arduino needs no presentation, known for its design, modules and accessories. It is a perfect environment to start electronics education for a number of reasons, including its compatibility with the wide range of accessories and modules as well as the large fan base that makes it easy to find materials and projects online. We offer all Arduino projects as official distributors for Spain. Check out our offer and extensive teaching materials in the area of courses and tutorials. If you are the teacher and want to prepare Arduino classes we can also complete a kit for your purposes and mark it with your company name. 

Arduino
Showing 1-25 of 25 item(s)
SparkFun WiFi Shield - ESP8266

SparkFun WiFi Shield - ESP8266

The SparkFun WiFi ESP8266 Shield is a shield for Arduino R3 R3 board enabling internet connection. ESP8266 as you all know is a solid fundament for any IoT project an in this version it can be simply and easily put on your board. It is a great middle ground between the sole module and the development board such NodeMcu or WeMos. So if you need a relatively cheap and super reliable way to internet for your Arduino project - this is the shield for you! ESP8266 shield WiFi comes with an AT-command firmware, hence can be controlled by any UART. It works great with any Arduino R· layout. The shield doesn´t have the headers on.

SP006

Last items in stock

Price €21.99
SparkFun Ardumoto - Motor...

SparkFun Ardumoto - Motor Driver Shield

The Ardumoto Shield was created based on the L298 H-bridge as a two-motor controller for Arduino. It was designed to be able to drive two DC motors up to 2A per channel. Together with its Arduino, it will provide the perfect platform to control RC vehicles, or small autonomous robots. Its use has been made easier, LEDs with control signal have been added and the possibilities for advanced users have been increased.

SP011

Available

Price €23.99
MyoWare Cable Shield

MyoWare Cable Shield

This Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare muscle sensor without actually connecting it to your person.

SP072

Backorder

Price €6.49
MyoWare Muscle Sensor...

MyoWare Muscle Sensor Development Kit - OBSOLETE

This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together.

SP074

MyoWare Power Shield

MyoWare Power Shield

MyoWare Power Shield is designed to use two standard CR2032 coin cell batteries to power the MyoWare muscle sensor. These will be connected in parallel for extended capacity at a nominal 3.0V.

SP071

Backorder

Price €6.49
SparkFun Qwiic Adapter

SparkFun Qwiic Adapter

This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds

SP033

Available

Price €1.89
MyoWare 2.0 Cable Shield

MyoWare 2.0 Cable Shield

This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person.

SP045

Available

Price €7.49
SparkFun DataLogger IoT - 9DoF

SparkFun DataLogger IoT - 9DoF

SparkFun DataLogger IoT - 9DoF is a pre-programmed data logger to automatically log IMU, GPS and various pressure, humidity and distance sensors - all without having to write a single line of code! DataLogger automatically detects, configures and logs Qwiic sensors. It is specifically designed for users who only need to capture a large amount of data in a CSV or JSON file and return it to their larger project.

SP099

Last items in stock

Price €94.90
SparkFun Triple Axis Accelerometer Breakout - LIS331

SparkFun Triple Axis Accelerometer Breakout - LIS331

This board features and extremely low power LIS331HH accelerometer. The unit is a MEMS three axis linear accelerometer with a I2C- SPI serial interface enabling use with embedded applications. The range of measurement includes three options +-6g/+-12g/+-24g and enables datalogging with output rates fro 0.5 Hz to 1kHz. Check this and plenty of other accelerometers in our offering of both Sparkfun and other producers

SP003

Available

Price €18.95
SparkFun Triple Axis Accelerometer Breakout - MMA8452Q

SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (wo headers)

Sensor used for measuring of the object acceleration in 3 axis in the range of either ±2g, ±4g or ±8g. It is powered with 1.95V to 3.6V. What sets this module apart is its user-friendliness, compatible size and low power consumption. it comes with headers attached

It is a version without headers of a popular BOB-09868 from SparkFun.

In our offer, we have a versuib with headers (SP0001) and with QWIC system (SP0005).

SP004

Last items in stock

Price €16.99
SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 & MAX32664 (Qwiic)

SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 & MAX32664 (Qwiic)

This tiny little board features two chips from Maxim Integrated: MAX32664 and MAX30101. The 30101 Oximetry module  is the sensor on board responding for both oximetry and heart rate sesnsing. The MAX32664 is equipped with a Cortex M4 handling algorithimc calculations, digital filtering and automatic gain control. The board comes with I2C and SparkFun has provided to it Qwiic connectors for ease of use.

SP030

Last items in stock

Price €52.99
SparkFun RedBot Sensor -...

SparkFun RedBot Sensor - Accelerometer

The accelerometer sensor is an add-on for your RedBot that provides shock and motion detection. The sensor works by measuring acceleration forces on the x, y and z axes. By measuring the amount of acceleration (or lack thereof), your robot can better understand its movements.

SP078

Available

Price €8.99
SparkFun MEMS Microphone...

SparkFun MEMS Microphone Breakout - INMP401 (ADMP401) - obsolete

Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies.

SP021

SparkFun Altavoz Hamburger

SparkFun Altavoz Hamburger

SparkFun Hamburger speaker is a high quality speaker in a small form and with even smaller price. You wouldn't believe you can get a quality product for less than 7€, right? Well, we couldn't believe that as well, but SparkFun makes that possible.

SP022

✗ Out-of-Stock

Price €7.99
SparkFun GPS Breakout

SparkFun GPS Breakout

This small GPS breakout is yet another Qwiic module from SparkFun as per usual based on I2C - meaning that you can keep your serial port free for other applications. The board features XA1110 GPS module from GTOP and MediaTek MT3333 chipset already loaded with SparkFun firmware enabling clean and easy use of both ports. 

SP034

Last items in stock

Price €65.99
Serial Enabled 16x2 LCD -...

Serial Enabled 16x2 LCD - White on Black 5V

It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328.

SP035

Last items in stock

Regular price €36.99 -€10.00 Price €26.99
Bus Pirate - v3.6a

Bus Pirate - v3.6a

This little board is great for any type of prototyping - enables troubleshooting and debugging of any board with voltage from 0 to 5.5V. The  board interprets the commands and sends them further via a proper protocol (ranging from UART through I2C up to HDD44780 LCD). The Pirate lets analyze as well the data sent back from the device to the computer terminal effectively allowing to decipher potential errors. The bootloader installed on the board enables the quick and easy update of firmware and changing the functionality of the board.

This board features PIC24FJ64 and FT232RL USB-to-serial chip enabling swift communication over the mini-B USB port. On the other end of the board 2x5 pin header is placed with detailed descriptions of each pin.

SP037

Last items in stock

Price €39.99
SparkFun XBee Explorer Dongle

SparkFun XBee Explorer Dongle

SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables!

The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA.

SP038

Last items in stock

Price €34.99
SparkFun XBee Explorer Dongle

SparkFun XBee Explorer Dongle

SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables!

The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA.

SP039

Last items in stock

Price €33.99
Load Cell Weight Sensor 50kg

Load Cell Weight Sensor 50kg

Pressure sensor sometimes called strain gauge. Load cell for measuring weights up to 50kg. The transducer measures the strain of the metal structure and converts it into a few mV.

Sp096

Available

Regular price €7.69 -€0.99 Price €6.70
Back to top

Active filters

  • Brand: Sparkfun

Arduino - the first global microcomputer for education

Arduino was born in Italy in the mind of Massimo Banzi in a bar whose name has obtained the plaque. The main idea of the invention was popularization of electronics in education both among people who already have knowledge of electronics but mainly for those who do not have much experience with science. Thus was conceived the idea of the simple board in open-source environment, which allows the infinity of developments and projects by the community of Arduino. The board is based on Atmel's 8-bit AVR microcontroller and an essential part of its construction is the pinout (i.e. the shape of the extension pins), which makes board extensions to a multitude of shields and modules possible. Shields are pre-programmed modules that facilitate the number of applications including motor control (an essential function in robotics), light module control (LED, OLED) or video recording by camera modules.

Arduino IDE - the programming environment

Arduino IDE is a multiplatform application written in Java language, which forms the basis of all projects and the whole Arduino environment. The environment is designed in this way to be friendly to hobbyists and people who do not deal with creating the software. The IDE contains the code editor with such functions as syntax highlighting or automatic engraving in the code, as well as allowing the program to be compiled and sent to the Arduino surface. There is usually no need for additional editing of make files or programs running from the command line, which makes the program more user-friendly for programming beginners.

Arduino IDE contains the C/C++ library called "Wiring" (derived from the project with the same name), thanks to which basic input/output operations are being made much easier. Programs for Arduino are mainly written in C/C++ language, however users must define only two functions to receive the program ready to go:

setup () - function performed once, at the beginning of the program action, used mainly for configuration loading,

loop () - function activated repeatedly, during the whole period of the program action, i.e. until the power is switched off from the arrangement

With these two functions you can write your first program in Arduino!

Compatible boards

Since the time when the Arduino team's projects are available as copyleft licenses, the programmers have restricted the use of the Arduino name only, leaving the construction in opensource form and the whole project open for community development. However, part of the community decided to develop some plates with the same construction but other names like Freeduino, which forms the project separated from Arduino. In addition, there are a variety of producers that offer clones of the most basic Arduino plates - such as Seeduino and many others. It should be remembered that clones work well with established plates, new products rarely have good clones so their compatibility and quality often suffers.