Filter By


Filter By

Categories

Categories

Availability

Availability

Brand

Brand

Price

Price

  • €0.00 - €599.00

Color

Color

USB

USB

Chip

Chip

Clock

Clock

Memory

Memory

Interfaces

Interfaces

Voltages

Voltages

Pinout

Pinout

Dimensions

Dimensions

Pins digital

Pins digital

Pins analog

Pins analog

PWM

PWM

Resolución

Resolución

Filas de carácteres

Filas de carácteres

Firmware

Firmware

Módulo ESP

Módulo ESP

Carga máxima

Carga máxima

Número de canales

Número de canales

Pines

Pines

Development boards

Una placa de desarollo conocida también como computadora de placa única (SBC) es una computadora completa construida en una placa de circuito único, con microprocesador (s), memoria, entrada / salida (E / S) y otras características requeridas de una computadora funcional. Las computadoras de una sola placa se hicieron como sistemas de demostración o desarrollo, para sistemas educativos o para su uso como controladores integrados de computadora. Muchos tipos de computadoras domésticas o computadoras portátiles integran todas sus funciones en una sola placa de circuito impreso. En nuestra oferta tenemos variedad de placas de desarollo de marcas más populares como Raspberry, Arduino, micro:bit o Lilypad.

Development boards
Showing 1-60 of 481 item(s)

Arduino Uno R3

Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog

BAR66

Price €23.99

Arduino Uno Wifi Rev2

Imagine the simplicity of the Arduino One connected to the communication module. Seems too good to be true, right? That's Arduino One WiFi. Arduino Uno WiFi REV2 (ABX00021) with its integrated IMU (Inertial Measurement Unit) and WiFi is the ideal board to start making your first Internet application from scratch, or to use in the educational field. It has 14 digital input / output pins (5 of which are PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, an accelerometer, an RGB LED, a power connector and an ICSP header.

BAR21

Regular price €56.59 -€5.00 Price €51.59

Arduino Mega 2560 Rev3

Arduino Mega 2560 R3  A000067 has been designed with larger and more ambitious projects in mind. It has 54 digital input / output pins (15 of which can be used as PWM outputs), 16 analog inputs, 4 UART (i.e. hardware serial ports). The large number of analog and digital pins, along with larger MEMORY, make the Mega 2560 ideal for devices such as 3D printers and other demanding applications. The Mega 2560 board is compatible with most shields designed for Arduino Uno.

BAR67

Regular price €49.99 -€5.00 Price €44.99

TinkerKit Braccio Robot Arduino - Robot Arm 6 DOF

The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel.

Discover the unlimited potential of robotics and mechanics with BRACCIO!

T050000

Regular price €286.49 -€30.00 Price €256.49

Arduino Kit Starter Oficial

Arduino Starter Kit is a perfect kit to start your adventure with Arduino. It offers a range of original components, which ensure compatibility with all Arduino parts and give you access to full range of official materials. Additionally, you get a 15 projects booklet, which is pretty much all you need to start rolling with your Arduino projects

KA002

Price €105.95

Arduino Pro PORTENTA H7

The Arduino Portenta H7 represents a new family of chips designed for IoT applications.  The board uses the STM32H747 microcontroller equipped with Cortex-M7 and Cortex-M4 cores, which allows it to run programs written in Arduino®, MicroPython or JavaScript. In addition, the Arduino Portent H7 is characterised by high performance and at the same time energy efficiency.

ABX42

Price €125.99

Arduino Nano

Arduino Nano A000005 is the smaller, friendlier version of Uno's badge. Perfect for IoT applications and for mobile device prototypes. This board is based on the ATmega328 and has a wide range of applications, thanks to its small size and flexibility.

BAR05

Price €25.39

Arduino Nano Every

Arduino has decided to further develop its catchy Nano project in the direction of more power. Nano Every is the simplest of the new series as it doesn´t include any sensors nor connectivity solution, however still significantly more powerful than standard Nano (50% more program memory and 2 times more RAM). Above characteristics make it perfect for projects of small devices with more advanced functionalities, such as audio processing or robotics.

BAR33

Price €20.99

Arduino Nano 33 Iot

Nano 33 IoT as the name would suggest is an WiFi enabled version of the famous Nano. It has an upgraded microcontroller to ARM Cortex SAMD21 y el módulo NINA-W10 (based on ESP32) from u-blox and a module IMU LSM6DS3.

BAR32

Price €26.99

Arduino Nano 33 Ble

Nano was already a great invention and a super facilitator of many projects, but with Nano BLE opens yet another set of opportunities. First of all, the BLE module - the newest and lowest energy consumption connectivity solution, which effectively allows you to leverage the same technology as used in the newest mass-produced electronic devices

BAR34

Price €33.99

Arduino Nano 33 Ble Sense rev2

On top of all the upgrades presented in Nano BLE (64 MHz clock, 1Mb flash memory, 256Kb SRAM) Nano BLE Sense Rev2 brings basic sensors to the table. It is truly impressive how Arduino team managed to fit those on such a small factor, nonetheless they did and did so for 5 basic modules.

In the package, you get 9 axis IMU, humidity and temperature sensor, barometric sensor, microphone and vision sensor (gesture, proximity, color and light intensity). Such a set together with TensorFlow compatibility enables basic machine learning functionalities straight after taking the board out of the box.

BAR35

Price €49.49

Arduino Oplà IoT Kit - Spanish - Official Internet of Things Kit

This new official Arduino Stuff online starter kit is the perfect kit to start your adventure with Arduino. It offers everything you need to introduce your home or environment to the world of home automation and Smart Home. This programmable platform consists of various sensors, touch buttons, actuators, and even a screen, all embedded inside a sophisticated spherical housing, allowing you to add smart connectivity to your devices.

The 8 projects included in the Oplà IoT Kit allow users to turn everyday devices into intelligent devices, which can be remotely controlled from a mobile phone.

AKX26

Price €145.90

Kit Funduino I/O Expansion starter kit for Arduino UNO

Kit Funduino I / O Expansion starter kit for Arduino UNO R3.
Kit 37 Sensors in a Box for Arduino features:
Including the referencias of módulos siguientes: - 1x módulo Funduino I / O Expansion
- 1x módulo zumbador activo Keyes
- 1x módulo foto resistencia Keyes
- 1x módulo sensor of temperatura Keyes
- 4x módulos sensor LED sombrero of Keyes paja
- 1x módulo sensor of sonido Keyes
- 1x módulo sensor Rotation Keyes
- 1x pulsador módulo
- 1x distancia sensor HC-SR04
- 1x módulo Joystick Doble 2 Ejes XY
- 1x servo 9g SG90
- 9x Dupont cables con conector 3 pins
- 20x Hembra-Macho Cables 20cm
- 1x USB cable for Arduino UNO Tipo A-B 50cm Helpful Links:
Install the IDE Arduino development interface

B0056

Price €38.90

ATmega2560 R3 REV3 16U2 Mega2560 module with USB cable

It has an Atmega2560 chip running at 16Mhz with a factory loaded bootloader with 54 digital input / output pins (from which 14 can be used as PWM outputs) and 16 analog inputs, 4 UART (hardware serial ports). The board includes a USB connector, an ICSP port, a reset button and some status LEDs. Atmega16U2 programmed as a USB-to-serial converter. Simply connect it to a computer with a USB cable or power with a power adapter and DC connector.

B0003

Price €24.90

W5100 Mini Network Module Ethernet Shield Arduino compatible

W5100 Mini Network Module Ethernet Shield Arduino features:
- Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip
- Provides a simple mode to connect your module to the local network and the internet
- Compatible with the official Arduino Ethernet library
- With this shield you can build a web server
- It can be used as a server or as a client - Controller: Wiznet W5100
- Supports TCP and UDP protocols
- Supports up to 4 simultaneous connections
- Compatible with all versions of Arduino: UNO, mega 1280/2560
- Dimensions: 50 x 25x 25mm

W0074

Price €10.90

Arduino Mkr Wifi 1010

Arduino MKR WiFi 1010  ( ABX00023 )  es la evolución del MKR1000 y está equipado con un módulo ESP32 de u-blox. Su objetivo es acelerar y simplificar la creación de prototipos de aplicaciones IoT basadas en WiFi gracias a la flexibilidad del módulo ESP32 y su bajo consumo de energía. CONECTIVIDAD USB MICRO TIPO B WIFI & BLE

ABX023

Price €46.90

Sensor Shield V5 APC220 Arduino compatible

Arduino Sensor Shield V5 APC220 features:
Sensor Shield V5.0 allows: - Being punctured directly to an Arduino Uno, Mega, Leonardo plate
- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more

M0001

Price €2.89

W5500 Ethernet Arduino Shield UNO Web Server Expansion Module

The Ethernet module for Arduino and compatible boards based on the Wiznet W5500 chip, faster than the previous W5100. It provides an easy way to connect your module to the local network and internet based WIZNET with a TCP/IP interface. Compatible with libraries with the same Ethernet API. A web server can be built with this UNO board shield. It can be used as a server or as a client.

W0106

Price €19.50

USB Host Shield Google Android ADK UNO Mega 2560

USB Host Shield Google Android ADK UNO Mega 2560 features:
Shield ADK USB allows: - Communication with other USB devices, to build their own mobile accessories
- Create projects that require USB Host functionality
- Supports USB 2.0, Android ADK
- It can also be used with any device equipped with SPI interface
- Compatible with Android devices: v2.3.4 and above
- USB Host with support for HUB protocol

M0005

Price €19.50

ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

W0014

Price €4.95

CNC Shield Expansion Plate V3 Engraver 3D Printer

CNC shield for arduino works as a controller for CNC type milling machines,
3D printers, laser cutters .
CNC Shield Expansion Plate V3 Engraver 3D Printer features:

  • 4 compatible sockets for use of A4988 stepper motor controllers (PAP), DRV8825, other compatible
  • 4 support axes X, Y, Z, A
  • 2 limit switches for each axis (6 in total)

I0011

Price €2.75

L293D Motor Drive Shield Expansion Board

It allows controlling many different types of engines: - Up to 4 bidirectional current motors
- Up to 2 stepper motors (unipolar or bipolar) In addition it is provided with two connectors for servos.                   L293D Motor Drive Shield Expansion Board features:
- Minimum operating voltage: 4.5 V
- Maximum operating voltage: 36 V
- Maximum current: ± 1.2 A (650mA)
- Logic voltage: 5V
- Controller L293D
- Measures: 70x55x20 mm L293D controller consists of 4 H bridges with 650 mA current with thermal protection.
Pull-down resistors keep the motors off during startup.

R0001

Price €2.95

Arduino compatible Nano V3.0 CH340 board

Version compatible with Arduino Nano V3.0
It has an ATMega328P chip running at 16Mhz with bootloader loaded factory.
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per I / O pin 40 mA
- Flash memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Frequency Clock: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0006

Price €8.95

Logging Recorder Data Logger Module Shield UNO Mega SD Card

It allows to save the record of any data.
It has a real time clock RTC, with battery included, so you can keep the date and time over the years and an SD notes reader, which accepts the format FAT16 and FAT32 to record your data. Logging Recorder Data Logger Module Shield UNO Mega SD Card features:
- Arduino data logging shield
- Data recording module to the FAT16 / FAT32 SD card
- Real time with RTC battery.
- SD card interface compatible with the FAT16 / FAT32 format
- Transmitter circuit level 3.3V.
- Compatible with Arduino UNO, Leonardo, ADK / Mega R3 or higher

M0022

Price €7.90

Nano plate V3.0 CH340 + Arduino compatible pins

It has an ATMega328P chip running at 16Mhz with a factory loaded bootloader
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per Pin I / O 40 mA
- Flash Memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Frequency: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0026

Price €9.99

Mini Submersible Water Pump DC 12V 200L/h 3W for ARDUINO

Mini Submersible Water Pump DC 5.5-12V 200L / H 3W
Mini Submersible Water Pump DC 12V 200L/h 3W ARDUINO features:

* Operating voltage: 5.5-12V * Max flow: max. 200 l / h * Maximum pumping height: 40cm- max. 150cm * Cable length: 140cm * Jack DC 5.5x2.1mm connector (ext / int) * Outlet diameter: 8 mm * Dimensions: 36mm x 25mm

M0111

Price €9.95

Module TCRT5000 Infrared Sensor IR Tracker Line Obstacle

The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision.
The ideal obstacle detection detector for the installation of smart robots.
TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object.
The working wavelength is 950nm.
The transmitter is infrared LED and the phototransistor receiver.
By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected).
The sensor allows the detection of an object at a distance of up to 12 mm.

S0025

Price €1.85

Mini Submersible Water Pump DC 12V 240L/h 3.6W

Mini Submersible Water Pump DC 12V 240L/h 3.6W features:
- Operating voltage: 6-12V
- Max flow: max .. 240 l / h
- Maximum height pumping: max. 300cm
- Cable length: 150cm
- Jack DC 5.5x2.1mm connector (ext / int)
- Outlet diameter: 8 mm
- Dimensions: 38mm x 26mm
- Jack DC 5.5x2.1mm connector (fi ext / fi int)

M0110

Price €9.95

433MHz RF Wireless Receiver + Transmitter

Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features:

Specifications of the emitter module: - Power supply: 3V ~ 12V
- Working intensity: max = 40mA (at 12V), min = 9mA (at 3V)
- AM ASK / OOK modulation
- SAW filter
- Working frequency: 315MHz-433.92MHz
- Transmission power: 25mW (315MHz at 12V)
- Range: 20 to 200 meters (different voltages can give different results)
- Transfer speed: 4 kB / S
- Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V
- Work intensity: 5.5mA (at 5.0VDC)
- Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm

W0010

Price €1.09

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL001

Price €2.39

Support for HC-SR04 Ultrasonic Sensor

Support for ultrasounds, HC-SR04 distance meter.
Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features:
- Material: Acrylic
- Color: transparent
- Includes screws

S0005

Regular price €1.45 -€0.50 Price €0.95

Sensor Module FZ0888 IR Infrared Speed Meter

Sensor Module FZ0888 IR Infrared Speed Meter features:
- The FZ0888 encoder module is a device that can help you in the creation of your robotics and automation project, Whether you want to know the speed of a motor or its exact position
- The module has a digital output (DO) which can be connected to your preferred microcontroller.
The operating mode:
- When the sensor is blocked, the DO output is high
- The AO signal is not enabled in this module
- Power supply: 3.3-5V
- Power consumption current 20 mA max
- PCB dimensions: 32 x 14 mm

S0038

Price €1.89

Sensor Module Moisture Earth Water Soil

The module has two outputs: analog A0 and digital D0
Digital output D0 - signal 0 appears or 1 depending on the threshold setting
The threshold is set with the potentiometer
The sensor can be used for example:
Automatic watering for potted plants
With this module you will be able to measure the humidity of the soil, so that you will be able to control the humidity level of the soil of your plants
Characteristic:
Operation: 3.3V -5V
- Sensitivity adjustable by potentiometer
- Dual output mode: analog and digital
- Red LED - power indicator
- Green LED - indicator digital switching output
- PCB measurements: 3 x 1.5 cm
- Probe measurements: 6 x 3 cm

S0021

Price €1.95

DS18B20 Submersible Probe Sensor Temperature

Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.
DS18B20 Submersible Probe Sensor Temperature features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Red Vcc
      - Yellow digital output
- Inocidable steel
- Cable length: 1m

S0019

Price €2.39

DSC321 AT24C32 with Real Time Clock RTC Battery

RTC DS3231 clock module with EEPROM 32k.
High precision RTC module.
Can be used in projects of Arduino, PIC, AVR, STM32 and other.
DSC321 AT24C32 with Real Time Clock RTC Battery features:
- Based on DS3231
- EEPROM AT24C32 (32K)
- I2C interface
- LED work indicator
- Includes CR2032 3V battery

M0004

Price €4.49

NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz

NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz features:
- Standard: NFC Forum Type2 Tag Ntag215
- Protocol: ISO14443A
- Memory: 540B (504B) EEPROM - Operating frequency: 13.56MHZ
- Reading distance: 0-10CM
- Communication speed: 106Kboud
- Working temperature: -20ºC to 70ºC
- Number of uses 100,000 times
- Data retention: 10 years
- Material: PVC
- Dimensions 86 x 54 x 0.84 mm

M0052

Price €1.99

Light Sensor Module BH1750 FVI Arduino and Raspberry compatible

Descripción: Light sensor module to measure light intensity and obtain digital data from it.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
BH1750FVI (Rohm) is used to adjust backlighting of LCD screens and keyboards by manufacturers of mobile phones, digital cameras, navigation and portable gaming devices. Light Sensor Module BH1750 FVI Arduino Raspberry features:
- Chip BH1750FVI
- Supply voltage 3V-5V
- Integrated 16bit AD converter
- Detection range: 0-65535 lx (with an accuracy of 1 lux)
- Interface: II2C
- Low dependence on the light source (eg incandescent lamp, fluorescent lamp, halogen lamp, white LED, sunlight)
- Dimensions 18.4 x 14 mm

M0019

Price €2.99

Photoresistor GL5516 LDR

10x Photoresistor 5mm GL5516 LDR 5-10k for Arduino.
Photoresistor is a resistor whose resistance decreases when increasing the intensity of the light that falls on it. 10x Photoresistor GL5516 LDR features:
- Model: GL5516
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 90mW.
- Resistance with light (10lux): 5-10KΩ
- Resistance with darkness (0lux): 0.5MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC

S0012

Price €0.15

ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 features:
- Chip ENC28J60 Microchip
- Module: 10Base-T
- 3.3V power
- SPI interface
- 25Mhz speed
- LED status LED
- Hanrun network transformer
- Network Interface board HR911105A
- Operating temperature: -40ºC to + 85ºC
- Dimensions: 51 x 19 x 16 mm

W0006

Price €9.90

10x Photoresistor GL5539 LDR 50k - 100k

Photoresistance is a resistor whose resistance decreases as the intensity of the light that falls on it increases. 10x Photoresistor GL5539 LDR 50k - 100k features:
- Model: GL5539
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 100mW
- Resistance with light (10lux): 50-100KΩ
- Resistance with darkness (0lux): 5MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC

S0013

Price €0.15

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL004

Regular price €3.15 -€0.50 Price €2.65

8 Channel High Trip 5V 10A Relay Module

This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, from the TTL 8 Channel High Trip 5V 10A Relay Module features:
- Channels: 8 (independent protected with Optocouplers)
- Supply Voltage Vcc: 5Vdc
- Output Current: 10A
- High trip min 3.3V input IN1. ..IN8
- Relay activation current: 5 ~ 10mA
- Isolation: Yes
- Indicator LED: For each channel
- Dimensions: 55x 139mm
- Weight: 120g
COM GND jumper input: connects GND optocouplers and GND of the circuit

RL015

Price €9.95

Barometric Pressure, Temperature and Altitude Sensor BMP180

Barometric Pressure, Temperature and Altitude Sensor BMP180 features:
- Module based on the atmospheric pressure sensor BMP180
- Supply voltage: 1.8 - 3.6 V
- Energy consumption: 0.5uA
- I2C interface
- Measuring range: 300 - 1100hPa
- Dimensions: 10 x 13 mm
- Includes soldering pins

M0024

Regular price €3.89 -€0.59 Price €3.30

NRF24L01 + Wireless Transceiver Module 2.4GHz

It is ultra compact and very low consumption. It works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripheral control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Transceiver Module 2.4GHz features:
- Based on chip NRF24L01 + Ultra Low Power
- Free band: 2.4GHz ISM
- Speed: 250kbps, 1Mbps, 2Mbps
- Working current - reception: 13 mA
- Transmission: 11 mA (900nA -deep sleep mode)
- Receiving sensitivity: -94dB 250kbps
- Coverage in closed spaces: 15m / 30m
- SPI interface
- Input voltage: 1.9V- 3.6V
- Input / output port voltage: 0V-3.3V / 5V
- Coverage in open areas: 100m approx.
- Clock frequency: 16MHz

W0005

Price €1.59

Current Sensor ACS712 AC/DC 20A Hall Current Ammeter

Sensor used to measure the current in the circuit to which it is connected.
It is based on the ACS712 chip, capable of measuring intensity in both DC and AC. Current Sensor ACS712 AC/DC 20A Hall Current Ammeter features:
- Output: Analog
- Power: 5V
- Accuracy: 1.5%
- Measuring capacity: +/- 20A
- Dimensions: 31 x 13 mm

M0105

Price €2.99

E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car

Ideal for projects with ARDUINO, Smart Car
Detects transparent and translucent obstacles
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:
- Current consumption: up to 100 mA
- Supply voltage 5V
- Current consumption <25mA
- Response time of 2 ms
- Measured distance: 3-80cm 15st angle
- Screw to adjust the sensitivity, the back
- Output status led indicator
- Operating temperature: -25°C - + 55°C
- Material: high-strength plastic
- Type of output: normally open, NPN
- Dimensions: 18 mm in diameter, Length 45 mm
- Cable length 55cm
- Departures:
      - Brown: +
      - Blue: -
      - Black: OUT

S0004

Price €6.95

WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811

WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features:
- WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually
- WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable.
- They are based on the 5050 LED
- 24-bit color control (8-bit PWM per channel)
- 16.8 millions of colors per LED
- One-wire communication
- Power: max. 5 Vdc
- Current: 18.5mA
- Input and output terminals (data and power)

P0102

Price €1.69

NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface

NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface features:
- Operating voltage: 5V
- Wait time of the module receives the data: more than 2S
- The waiting time of the module sends data: more than 300
- Transfer speed: 50 Byte / S (theoretical value)
- I2C / TWI address: 0 x 47 (decimal 35)
- Address NRF24L01: 0 x 34, 0 x 43, 0 x 10, 0 x 10, 0 x 01 (from lowest to highest)
- Size: 44 x 23 mm

W0066

Price €4.46

2x CNY70 Reflective Optical Sensor with Transistor Output

2x CNY70 Reflective Optical Sensor with Transistor Output features:
- Reflective optical sensor with transistor output
- Reflective optical coupler used to distinguish edge or line detection
- Dimensions of the housing are 7 x 7 x 6 mm
- Supply voltage: 5V
- Maximum diode current: 50 mA
- Maximum collector-emitter voltage: 32V
- Maximum collector current of 50 mA
- Quantity: 2 units

S0121

Price €0.74

SD Card Module Reader

The SD card reader module is a simple solution for transferring data to and from a standard SD card.
The pinout is directly compatible with Arduino, but it can also be used with other microcontrollers.
SD Card Module Reader features:
- Supply voltage: 3.3V or 5V 
- Interface: SPI 3.3V
- Dimensions: 30mm x 50mm x 12mm

M0023

Price €0.99

Matrix Membrane Keyboard 4x4 Modulo

High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side.
Ideal for your Arduino projects, but can also be used with other microcontrollers.
Matrix Membrane Keyboard 4x4 Modulo features:

- Rating circuit, Max: DC 35V 100 mA
- Cable length: 85 mm
- Dupont 8 pin connector
- Specific insulation: 100 M Ohm, 100V
- Useful life: + 1 million uses
- Contact parting:

M0025

Price €1.79

Relay SRD-12 DC-2P 12V 10A SPDT

Relay SRD-12 DC-2P 12V 10A SPDT features:
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- For power switching with 12V DC signals - Microcontroller, Arduino, Electronica

RL012

Price €0.98

4-Channel 5V 10A Relay Module

Characteristic:
- Channels: 4 (independent protected by Optocouplers)
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Isolation: Yes
- Indicator LED: For each channel
- Dimensions: 54x 72mm
- 5V Optocoupled 4-Channel Relay Module
- This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
User manual for the remote control + 4-channel 315 MHz IC2262 receiver:
- Relay Module Programming 5V 10A 4 Channel with remote control + 4 channel receiver

RL007

Price €3.99

Active filters

  • Categories: Arduino

What are development boards?

Development boards include a broad range of products focusing on microcontroller boards and microcomputers. Development boards can be used in a range of applications - starting with hobbyist use through educational purposes up to prototyping of devices and electronic products. We aim to serve all of those purposes and for this reason, in addition to extensive product description we constantly develop our tutorial materials to provide you guidance on the full potential use of our products

Key brands in development boards

Development boards include both microcomputers such as Raspberry as well as microcontrollers of Arduino type. We have broad offering of the most popular boards in this category such as mentioned Arduino and Raspberry as well as more niche solutions (DSP boards, Orange Pi, Nano Pi). 

Accessories for the development boards

Depending on the brand you go for there is a range of different accessories that will help you experiment and play with your board. Within Arduino the most known are shields of producers such as Sparkfun or Adafruit in addition to original modules, for Raspberry these would be HATs of producers such as Pimoroni, Pi Hut and many others. We have a broad range of distributor agreements for Spain and Portugal with the leading providers in this space and thus have on of the widest offerings in the market.